| Age | Commit message (Collapse) | Author |
|---|
|
https://bugzilla.redhat.com/show_bug.cgi?id=1081429
|
|
|
|
|
|
container
It's generally preferrable to conditionalize on the actual ability to do
something then the context we run in.
|
|
cmdline
"debug" should apply to all tools, but "quiet" only to PID1.
|
|
The DefaultInstance= name is used when enabling template units when only
specifying the template name, but no instance.
Add DefaultInstance=tty1 to getty@.service, so that when the template
itself is enabled an instance for tty1 is created.
This is useful so that we "systemctl preset-all" can work properly,
because we can operate on getty@.service after finding it, and the right
instance is created.
|
|
do all-unit preset operations
The new "systemctl preset-all" command may now be used to put all
installed units back into the enable/disable state the vendor/admin
encoded in preset files.
Also, introduce "systemctl --preset-mode=enable-only" and "systemctl
--preset-mode=disable-only" to only apply the enable or only the disable
operations of a "systemctl preset" or "systemctl preset-all" operation.
"systemctl preset-all" implements this RFE:
https://bugzilla.redhat.com/show_bug.cgi?id=630174
|
|
Process 1 (aka init) needs to be started with an empty signal mask.
That includes the process 1 that's started after the initrd is finished.
When the initrd is using systemd (as it does with dracut based initrds)
then it is systemd that calls the real init. Normally this is systemd
again, except when the user uses for instance "init=/bin/bash" on the
kernel command line.
|
|
"-s" switch
|
|
/etc/mtab should die die die. It's sad enough util-linux still contains
support for it, but we don't have to partake in that charade, so let's
turn this off.
This is in-line with the fact that since years we already have been
"tainting" systemd if we detect /etc/mtab not being a symlink...
Of course, util-linux is currently broken, and still touches /etc/mtab,
weven if we pass "--no-mtab" to it:
https://bugzilla.redhat.com/show_bug.cgi?id=1109367
But hey, let's hope that gets fixed quickly, even if total removal of
/etc/mtab support from util-linux might not happen so quickly...
|
|
When we boot up with an empty /etc it's ok if the symlink doesn't exist.
We will create it later with tmpfiles.
|
|
The file should have been in /usr/lib/ in the first place, since it
describes the OS container in /usr (and not the configuration in /etc),
hence, let's support os-release files in /usr/lib as fallback if no
version in /etc exists, following the usual override logic.
A prior commit already enabled tmpfiles to create /etc/os-release as a
symlink to /usr/lib/os-release should it be missing, thus providing nice
compatibility with applications only checking in /etc.
While it's probably a good idea if all apps check both locations via a
fallback logic, it is only necessary in the early boot process, as long
as the /etc/os-release symlink has not been restored, in case we boot
with an empty /etc.
|
|
With this in place RPMs can make sure that whatever they drop in is
immeidately applied, and not delayed until next reboot.
This also moves systemd-sysusers back to /usr/bin, since hardcoding the
path to /usr/lib in the macros would mean compatibility breaks in
future, should we turn sysusers into a command that is actually OK for
people to call directly. And given that that is quite likely to happen
(since it is useful to prepare images with its --root= switch), let's
just prepare for it.
|
|
this gives us a little bit more freedom to move things around later on,
as we don't hardcode the systemd paths in old RPMs that shall work with
new systemds.
|
|
static int killall(....) in ./src/core/killall.c tries to get "s"
initialized by calling get_process_comm(...) which calls
read_one_line_file(...) which if it fails will mean it is left
uninitialized.
It is then used in argument to strna(s) call where it is
dereferenced(!), in addition to nothing else initializing it before
the scope it is in finishes.
|
|
This new condition allows checking whether /etc or /var are out-of-date
relative to /usr. This is the counterpart for the update flag managed by
systemd-update-done.service. Services that want to be started once after
/usr got updated should use:
[Unit]
ConditionNeedsUpdate=/etc
Before=systemd-update-done.service
This makes sure that they are only run if /etc is out-of-date relative
to /usr. And that it will be executed after systemd-update-done.service
which is responsible for marking /etc up-to-date relative to the current
/usr.
ConditionNeedsUpdate= will also checks whether /etc is actually
writable, and not trigger if it isn't, since no update is possible then.
|
|
|
|
Not that it really would have any effect on the generated code, but
let's not confuse people...
|
|
|
|
Parsing sysv files was moved to the sysv-generator in the previous commit.
This patch removes the sysv parsing from serivce.c.
Note that this patch drops the following now unused sysv-specific info
from service dump:
"SysV Init Script has LSB Header: (yes/no)"
"SysVEnabled: (yes/no)"
"SysVRunLevels: (levels)"
|
|
For now only What=, Options=, Type= are supported, and Where= is deduced
from the unit name.
|
|
Prevent use of uninitialized variable and removed a now unused
cleanup function for freeaddrinfo
|
|
Now that we properly exclude autofs mounts from ProtectSystem= we can
include it in the effect of ProtectSystem= again.
|
|
Instead of blindly creating another bind mount for read-only mounts,
check if there's already one we can use, and if so, use it. Also,
recursively mark all submounts read-only too. Also, ignore autofs mounts
when remounting read-only unless they are already triggered.
|
|
/root can't really be autofs, and is also a home, directory, so cover it
with ProtectHome=.
|
|
everything below
This has the benefit of not triggering any autofs mount points
unnecessarily.
|
|
|
|
Restart=on-abnormal is similar to Restart=on-failure, but avoids
restarts on unclean exit codes (but still doing restarts on all
obviously unclean exits, such as timeouts, signals, coredumps, watchdog
timeouts).
Also see:
https://fedorahosted.org/fpc/ticket/191
|
|
It's not safe invoking NSS from PID 1, hence fork off worker processes
that upload the policy into the kernel for busnames.
|
|
This would otherwise unconditionally trigger any /boot autofs mount,
which we probably should avoid.
ProtectSystem= will now only cover /usr and (optionally) /etc, both of
which cannot be autofs anyway.
ProtectHome will continue to cover /run/user and /home. The former
cannot be autofs either. /home could be, however is frequently enough
used (unlikey /boot) so that it isn't too problematic to simply trigger
it unconditionally via ProtectHome=.
|
|
system
This is relatively complex, as we cannot invoke NSS from PID 1, and thus
need to fork a helper process temporarily.
|
|
|
|
also mounting /etc read-only
Also, rename ProtectedHome= to ProtectHome=, to simplify things a bit.
With this in place we now have two neat options ProtectSystem= and
ProtectHome= for protecting the OS itself (and optionally its
configuration), and for protecting the user's data.
|
|
|
|
Now that we moved the actual syslog socket to
/run/systemd/journal/dev-log we can actually make /dev/log a symlink to
it, when PrivateDevices= is used, thus making syslog available to
services using PrivateDevices=.
|
|
With Symlinks= we can manage one or more symlinks to AF_UNIX or FIFO
nodes in the file system, with the same lifecycle as the socket itself.
This has two benefits: first, this allows us to remove /dev/log and
/dev/initctl from /dev, thus leaving only symlinks, device nodes and
directories in the /dev tree. More importantly however, this allows us
to move /dev/log out of /dev, while still making it accessible there, so
that PrivateDevices= can provide /dev/log too.
|
|
|
|
ReadOnlySystem= uses fs namespaces to mount /usr and /boot read-only for
a service.
ProtectedHome= uses fs namespaces to mount /home and /run/user
inaccessible or read-only for a service.
This patch also enables these settings for all our long-running services.
Together they should be good building block for a minimal service
sandbox, removing the ability for services to modify the operating
system or access the user's private data.
|
|
Instead of accessing /proc/1/environ directly, trying to read the
$container variable from it, let's make PID 1 save the contents of that
variable to /run/systemd/container. This allows us to detect containers
without the need for CAP_SYS_PTRACE, which allows us to drop it from a
number of daemons and from the file capabilities of systemd-detect-virt.
Also, don't consider chroot a container technology anymore. After all,
we don't consider file system namespaces container technology anymore,
and hence chroot() should be considered a container even less.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
drop-ins don't carry the main configuration of a unit, hence read them
if we can't, complain if we cannot, but don't fail.
|
|
Only accept cpu quota values in percentages, get rid of period
definition.
It's not clear whether the CFS period controllable per-cgroup even has a
future in the kernel, hence let's simplify all this, hardcode the period
to 100ms and only accept percentage based quota values.
|
|
This is the behaviour the kernel cgroup rework exposes for all
controllers, hence let's do this already now for all cases.
|
|
Introduce a (unsigned long) -1 as "unset" state for cpu shares/block io
weights, and keep the startup unit set around all the time.
|
|
Similar to CPUShares= and BlockIOWeight= respectively. However only
assign the specified weight during startup. Each control group
attribute is re-assigned as weight by CPUShares=weight and
BlockIOWeight=weight after startup. If not CPUShares= or
BlockIOWeight= be specified, then the attribute is re-assigned to each
default attribute value. (default cpu.shares=1024, blkio.weight=1000)
If only CPUShares=weight or BlockIOWeight=weight be specified, then
that implies StartupCPUShares=weight and StartupBlockIOWeight=weight.
|
