| Age | Commit message (Collapse) | Author |
|---|
|
This improves kernel command line parsing in a number of ways:
a) An kernel option "foo_bar=xyz" is now considered equivalent to
"foo-bar-xyz", i.e. when comparing kernel command line option names "-" and
"_" are now considered equivalent (this only applies to the option names
though, not the option values!). Most of our kernel options used "-" as word
separator in kernel command line options so far, but some used "_". With
this change, which was a source of confusion for users (well, at least of
one user: myself, I just couldn't remember that it's systemd.debug-shell,
not systemd.debug_shell). Considering both as equivalent is inspired how
modern kernel module loading normalizes all kernel module names to use
underscores now too.
b) All options previously using a dash for separating words in kernel command
line options now use an underscore instead, in all documentation and in
code. Since a) has been implemented this should not create any compatibility
problems, but normalizes our documentation and our code.
c) All kernel command line options which take booleans (or are boolean-like)
have been reworked so that "foobar" (without argument) is now equivalent to
"foobar=1" (but not "foobar=0"), thus normalizing the handling of our
boolean arguments. Specifically this means systemd.debug-shell and
systemd_debug_shell=1 are now entirely equivalent.
d) All kernel command line options which take an argument, and where no
argument is specified will now result in a log message. e.g. passing just
"systemd.unit" will no result in a complain that it needs an argument. This
is implemented in the proc_cmdline_missing_value() function.
e) There's now a call proc_cmdline_get_bool() similar to proc_cmdline_get_key()
that parses booleans (following the logic explained in c).
f) The proc_cmdline_parse() call's boolean argument has been replaced by a new
flags argument that takes a common set of bits with proc_cmdline_get_key().
g) All kernel command line APIs now begin with the same "proc_cmdline_" prefix.
h) There are now tests for much of this. Yay!
|
|
This stripping is contolled by a new boolean parameter. When the parameter
is true, it means that the caller does not care about the distinction between
initrd and real root, and wants to act on both rd-dot-prefixed and unprefixed
parameters in the initramfs, and only on the unprefixed parameters in real
root. If the parameter is false, behaviour is the same as before.
Changes by caller:
log.c (systemd.log_*): changed to accept rd-dot-prefix params
pid1: no change, custom logic
cryptsetup-generator: no change, still accepts rd-dot-prefix params
debug-generator: no change, does not accept rd-dot-prefix params
fsck: changed to accept rd-dot-prefix params
fstab-generator: no change, custom logic
gpt-auto-generator: no change, custom logic
hibernate-resume-generator: no change, does not accept rd-dot-prefix params
journald: changed to accept rd-dot-prefix params
modules-load: no change, still accepts rd-dot-prefix params
quote-check: no change, does not accept rd-dot-prefix params
udevd: no change, still accepts rd-dot-prefix params
I added support for "rd." params in the three cases where I think it's
useful: logging, fsck options, journald forwarding options.
|
|
No functional change.
|
|
The macro determines the right length of a AF_UNIX "struct sockaddr_un" to pass to
connect() or bind(). It automatically figures out if the socket refers to an
abstract namespace socket, or a socket in the file system, and properly handles
the full length of the path field.
This macro is not only safer, but also simpler to use, than the usual
offsetof() + strlen() logic.
|
|
This should be handled fine now by .dir-locals.el, so need to carry that
stuff in every file.
|
|
GLIB has recently started to officially support the gcc cleanup
attribute in its public API, hence let's do the same for our APIs.
With this patch we'll define an xyz_unrefp() call for each public
xyz_unref() call, to make it easy to use inside a
__attribute__((cleanup())) expression. Then, all code is ported over to
make use of this.
The new calls are also documented in the man pages, with examples how to
use them (well, I only added docs where the _unref() call itself already
had docs, and the examples, only cover sd_bus_unrefp() and
sd_event_unrefp()).
This also renames sd_lldp_free() to sd_lldp_unref(), since that's how we
tend to call our destructors these days.
Note that this defines no public macro that wraps gcc's attribute and
makes it easier to use. While I think it's our duty in the library to
make our stuff easy to use, I figure it's not our duty to make gcc's own
features easy to use on its own. Most likely, client code which wants to
make use of this should define its own:
#define _cleanup_(function) __attribute__((cleanup(function)))
Or similar, to make the gcc feature easier to use.
Making this logic public has the benefit that we can remove three header
files whose only purpose was to define these functions internally.
See #2008.
|
|
Sort the includes accoding to the new coding style.
|
|
|
|
|
|
|
|
|
|
|
|
There are more than enough to deserve their own .c file, hence move them
over.
|
|
Modernize the code a bit:
- Get rid of FOREACH_WORD_SEPARATOR() loop in favour of a
extract_first_word() loop.
- Remove find_binary()'s "local" flag. It's not reasonably possible to
look for binaries on remote systems, we hence should not pretend we
could.
- When we cannot find a suitable binary, return the last error returned
from access() rather than ENOENT unconditionally.
- Rework fsck_exists() and mkfs_exists() to return 1 on success, 0 if
the implementation is missing and negative on real errors. This is
more like we do it in other functions.
- Make sure we also detect direct fsck symlinks to "true", rather than
just absolute ones to /bin/true.
|
|
fsck: start reboot.target irreversibly
|
|
In sd-bus, the sd_bus_open_xyz() family of calls allocates a new bus,
while sd_bus_default_xyz() family tries to reuse the thread's default
bus. bus_open_transport() sometimes internally uses the former,
sometimes the latter family, but suggests it only calls the former via
its name. Hence, let's avoid this confusion, and generically rename the
call to bus_connect_transport().
Similar for all related calls.
And while we are at it, also change cgls + cgtop to do direct systemd
connections where possible, since all they do is talk to systemd itself.
|
|
In some situations rebooting after fixing rootfs fails because
the job for reboot.target gets canceled. To avoid this
the "mode" parameter of the StartUnitReplace() call needs to be
set to "replace-irreversibly".
|
|
sd_bus_flush_close_unref() is a call that simply combines sd_bus_flush()
(which writes all unwritten messages out) + sd_bus_close() (which
terminates the connection, releasing all unread messages) +
sd_bus_unref() (which frees the connection).
The combination of this call is used pretty frequently in systemd tools
right before exiting, and should also be relevant for most external
clients, and is hence useful to cover in a call of its own.
Previously the combination of the three calls was already done in the
_cleanup_bus_close_unref_ macro, but this was only available internally.
Also see #327
|
|
mask/handlers
Also, when the child is potentially long-running make sure to set a
death signal.
Also, ignore the result of the reset operations explicitly by casting
them to (void).
|
|
No functional changes.
|
|
|
|
For a longer discussion see this:
http://lists.freedesktop.org/archives/systemd-devel/2015-April/030175.html
This introduces /run/systemd/fsck.progress as a simply
AF_UNIX/SOCK_STREAM socket. If it exists and is connectable we'll
connect fsck's -c switch with it. If external programs want to get
progress data they should hence listen on this socket and will get
all they need via that socket. To get information about the connecting
fsck client they should use SO_PEERCRED.
Unless /run/systemd/fsck.progress is around and connectable this change
reverts back to v219 behaviour where we'd forward fsck output to
/dev/console on our own.
|
|
Among other smaller fixes, explicitly check if we are invoked on a block
device before making use of st.st_rdev.
|
|
|
|
|
|
|
|
cur and max were changed to size_t in ac6e2f0dfc2e800f01c79ecea2b811914110a7b9
update the format accordingly.
|
|
|
|
|
|
gcc was complaining that progress_rc might be used uninitalized.
But it was actually always set, because the condition was always
satisfied. Remove the condition.
|
|
This patch removes includes that are not used. The removals were found with
include-what-you-use which checks if any of the symbols from a header is
in use.
|
|
Try to connect and send to plymouth (if running) some checked report progress,
using direct plymouth protocole.
Update message is the following:
fsckd:<num_devices>:<progress>:<string>
* num_devices corresponds to the current number of devices being checked (int)
* progress corresponds to the current minimum percentage of all devices being
checked (float, from 0 to 100)
* string is a translated message ready to be displayed by the plymouth theme
displaying the information above. It can be overriden by plymouth themes
supporting i18n.
Grab in fsckd plymouth watch key Control+C, and propagate this cancel request
to systemd-fsck which will terminate fsck.
Send a message to signal to user what key we are grabbing for fsck cancel.
Message is: fsckd-cancel-msg:<string>
Where string is a translated string ready to be displayed by the plymouth theme
indicating that Control+C can be used to cancel current checks. It can be
overriden (matching only fsckd-cancel-msg prefix) for themes supporting i18n.
|
|
Remove the plymouth running or show-status checks from systemd-fsck. Instead,
always connect to systemd-fsckd socket, and let this one decide if we display
progress or not.
|
|
Add systemd-fsckd multiplexer which accepts multiple systemd-fsck
instances to connect to it and sends progress report. systemd-fsckd then
computes and writes to /dev/console the number of devices currently being
checked and the minimum fsck progress. This will be used for interactive
progress report and cancelling in plymouth.
systemd-fsckd stops on idle when no systemd-fsck is connected.
Make the necessary changes to systemd-fsck to connect to the systemd-fsckd
socket.
|
|
If we scale our buffer to be wide enough for the format string, we
should expect that the calculation was correct.
char_array_0() invocations are removed, since snprintf nul-terminates
the output in any case.
A similar wrapper is used for strftime calls, but only in timedatectl.c.
|
|
src/libsystemd/sd-bus/bus-common-errors.h
Stuff in src/shared/ should not use stuff from src/libsystemd/ really.
|
|
If the format string contains %m, clearly errno must have a meaningful
value, so we might as well use log_*_errno to have ERRNO= logged.
Using:
find . -name '*.[ch]' | xargs sed -r -i -e \
's/log_(debug|info|notice|warning|error|emergency)\((".*%m.*")/log_\1_errno(errno, \2/'
Plus some whitespace, linewrap, and indent adjustments.
|
|
It corrrectly handles both positive and negative errno values.
|
|
As a followup to 086891e5c1 "log: add an "error" parameter to all
low-level logging calls and intrdouce log_error_errno() as log calls
that take error numbers", use sed to convert the simple cases to use
the new macros:
find . -name '*.[ch]' | xargs sed -r -i -e \
's/log_(debug|info|notice|warning|error|emergency)\("(.*)%s"(.*), strerror\(-([a-zA-Z_]+)\)\);/log_\1_errno(-\4, "\2%m"\3);/'
Multi-line log_*() invocations are not covered.
And we also should add log_unit_*_errno().
|
|
Also, make all parsing of the kernel cmdline non-fatal.
|
|
The -l (lock) has been temporary disabled due to conflict with
udev (https://bugs.freedesktop.org/show_bug.cgi?id=79576)
The problem is fixed since util-linux v2.25 (Jul 2014).
|
|
Since b5eca3a2059f9399d1dc52cbcf9698674c4b1cf0 we don't attempt to GC
busses anymore when unsent messages remain that keep their reference,
when they otherwise are not referenced anymore. This means that if we
explicitly want connections to go away, we need to close them.
With this change we will no do so explicitly wherver we connect to the
bus from a main program (and thus know when the bus connection should go
away), or when we create a private bus connection, that really should go
away after our use.
This fixes connection leaks in the NSS and PAM modules.
|
|
|
|
Also stop warning about unknown kernel cmdline options in the various
tools, not just in PID 1
|
|
https://bugs.freedesktop.org/show_bug.cgi?id=79576#c5
|
|
|
|
Some unattended systems do not have a console attached and entering
the default rescue mode will not be too helpful. Allow to specify
the "-y" option to attempt to fix all filesystem errors.
Manually verified by downloading an image.gz of e2fsprogs, using
losetup and running systemd-fsck on the loop device and varying
the fsck.repair=preen|yes|no option.
|
|
Modifies find_binary() to accept NULL in the second argument.
fsck.type lookup logic moved to new fsck_exists() function, with a test.
|
|
safe_close_pair() is more like safe_close(), except that it handles
pairs of fds, and doesn't make and misleading allusion, as it works
similarly well for socketpairs() as for pipe()s...
|
|
safe_close() automatically becomes a NOP when a negative fd is passed,
and returns -1 unconditionally. This makes it easy to write lines like
this:
fd = safe_close(fd);
Which will close an fd if it is open, and reset the fd variable
correctly.
By making use of this new scheme we can drop a > 200 lines of code that
was required to test for non-negative fds or to reset the closed fd
variable afterwards.
|
