| Age | Commit message (Collapse) | Author |
|---|
|
There are more than enough to deserve their own .c file, hence move them
over.
|
|
Modernize the code a bit:
- Get rid of FOREACH_WORD_SEPARATOR() loop in favour of a
extract_first_word() loop.
- Remove find_binary()'s "local" flag. It's not reasonably possible to
look for binaries on remote systems, we hence should not pretend we
could.
- When we cannot find a suitable binary, return the last error returned
from access() rather than ENOENT unconditionally.
- Rework fsck_exists() and mkfs_exists() to return 1 on success, 0 if
the implementation is missing and negative on real errors. This is
more like we do it in other functions.
- Make sure we also detect direct fsck symlinks to "true", rather than
just absolute ones to /bin/true.
|
|
fsck: start reboot.target irreversibly
|
|
In sd-bus, the sd_bus_open_xyz() family of calls allocates a new bus,
while sd_bus_default_xyz() family tries to reuse the thread's default
bus. bus_open_transport() sometimes internally uses the former,
sometimes the latter family, but suggests it only calls the former via
its name. Hence, let's avoid this confusion, and generically rename the
call to bus_connect_transport().
Similar for all related calls.
And while we are at it, also change cgls + cgtop to do direct systemd
connections where possible, since all they do is talk to systemd itself.
|
|
In some situations rebooting after fixing rootfs fails because
the job for reboot.target gets canceled. To avoid this
the "mode" parameter of the StartUnitReplace() call needs to be
set to "replace-irreversibly".
|
|
sd_bus_flush_close_unref() is a call that simply combines sd_bus_flush()
(which writes all unwritten messages out) + sd_bus_close() (which
terminates the connection, releasing all unread messages) +
sd_bus_unref() (which frees the connection).
The combination of this call is used pretty frequently in systemd tools
right before exiting, and should also be relevant for most external
clients, and is hence useful to cover in a call of its own.
Previously the combination of the three calls was already done in the
_cleanup_bus_close_unref_ macro, but this was only available internally.
Also see #327
|
|
mask/handlers
Also, when the child is potentially long-running make sure to set a
death signal.
Also, ignore the result of the reset operations explicitly by casting
them to (void).
|
|
No functional changes.
|
|
|
|
For a longer discussion see this:
http://lists.freedesktop.org/archives/systemd-devel/2015-April/030175.html
This introduces /run/systemd/fsck.progress as a simply
AF_UNIX/SOCK_STREAM socket. If it exists and is connectable we'll
connect fsck's -c switch with it. If external programs want to get
progress data they should hence listen on this socket and will get
all they need via that socket. To get information about the connecting
fsck client they should use SO_PEERCRED.
Unless /run/systemd/fsck.progress is around and connectable this change
reverts back to v219 behaviour where we'd forward fsck output to
/dev/console on our own.
|
|
Among other smaller fixes, explicitly check if we are invoked on a block
device before making use of st.st_rdev.
|
|
|
|
|
|
|
|
cur and max were changed to size_t in ac6e2f0dfc2e800f01c79ecea2b811914110a7b9
update the format accordingly.
|
|
|
|
|
|
gcc was complaining that progress_rc might be used uninitalized.
But it was actually always set, because the condition was always
satisfied. Remove the condition.
|
|
This patch removes includes that are not used. The removals were found with
include-what-you-use which checks if any of the symbols from a header is
in use.
|
|
Try to connect and send to plymouth (if running) some checked report progress,
using direct plymouth protocole.
Update message is the following:
fsckd:<num_devices>:<progress>:<string>
* num_devices corresponds to the current number of devices being checked (int)
* progress corresponds to the current minimum percentage of all devices being
checked (float, from 0 to 100)
* string is a translated message ready to be displayed by the plymouth theme
displaying the information above. It can be overriden by plymouth themes
supporting i18n.
Grab in fsckd plymouth watch key Control+C, and propagate this cancel request
to systemd-fsck which will terminate fsck.
Send a message to signal to user what key we are grabbing for fsck cancel.
Message is: fsckd-cancel-msg:<string>
Where string is a translated string ready to be displayed by the plymouth theme
indicating that Control+C can be used to cancel current checks. It can be
overriden (matching only fsckd-cancel-msg prefix) for themes supporting i18n.
|
|
Remove the plymouth running or show-status checks from systemd-fsck. Instead,
always connect to systemd-fsckd socket, and let this one decide if we display
progress or not.
|
|
Add systemd-fsckd multiplexer which accepts multiple systemd-fsck
instances to connect to it and sends progress report. systemd-fsckd then
computes and writes to /dev/console the number of devices currently being
checked and the minimum fsck progress. This will be used for interactive
progress report and cancelling in plymouth.
systemd-fsckd stops on idle when no systemd-fsck is connected.
Make the necessary changes to systemd-fsck to connect to the systemd-fsckd
socket.
|
|
If we scale our buffer to be wide enough for the format string, we
should expect that the calculation was correct.
char_array_0() invocations are removed, since snprintf nul-terminates
the output in any case.
A similar wrapper is used for strftime calls, but only in timedatectl.c.
|
|
src/libsystemd/sd-bus/bus-common-errors.h
Stuff in src/shared/ should not use stuff from src/libsystemd/ really.
|
|
If the format string contains %m, clearly errno must have a meaningful
value, so we might as well use log_*_errno to have ERRNO= logged.
Using:
find . -name '*.[ch]' | xargs sed -r -i -e \
's/log_(debug|info|notice|warning|error|emergency)\((".*%m.*")/log_\1_errno(errno, \2/'
Plus some whitespace, linewrap, and indent adjustments.
|
|
It corrrectly handles both positive and negative errno values.
|
|
As a followup to 086891e5c1 "log: add an "error" parameter to all
low-level logging calls and intrdouce log_error_errno() as log calls
that take error numbers", use sed to convert the simple cases to use
the new macros:
find . -name '*.[ch]' | xargs sed -r -i -e \
's/log_(debug|info|notice|warning|error|emergency)\("(.*)%s"(.*), strerror\(-([a-zA-Z_]+)\)\);/log_\1_errno(-\4, "\2%m"\3);/'
Multi-line log_*() invocations are not covered.
And we also should add log_unit_*_errno().
|
|
Also, make all parsing of the kernel cmdline non-fatal.
|
|
The -l (lock) has been temporary disabled due to conflict with
udev (https://bugs.freedesktop.org/show_bug.cgi?id=79576)
The problem is fixed since util-linux v2.25 (Jul 2014).
|
|
Since b5eca3a2059f9399d1dc52cbcf9698674c4b1cf0 we don't attempt to GC
busses anymore when unsent messages remain that keep their reference,
when they otherwise are not referenced anymore. This means that if we
explicitly want connections to go away, we need to close them.
With this change we will no do so explicitly wherver we connect to the
bus from a main program (and thus know when the bus connection should go
away), or when we create a private bus connection, that really should go
away after our use.
This fixes connection leaks in the NSS and PAM modules.
|
|
|
|
Also stop warning about unknown kernel cmdline options in the various
tools, not just in PID 1
|
|
https://bugs.freedesktop.org/show_bug.cgi?id=79576#c5
|
|
|
|
Some unattended systems do not have a console attached and entering
the default rescue mode will not be too helpful. Allow to specify
the "-y" option to attempt to fix all filesystem errors.
Manually verified by downloading an image.gz of e2fsprogs, using
losetup and running systemd-fsck on the loop device and varying
the fsck.repair=preen|yes|no option.
|
|
Modifies find_binary() to accept NULL in the second argument.
fsck.type lookup logic moved to new fsck_exists() function, with a test.
|
|
safe_close_pair() is more like safe_close(), except that it handles
pairs of fds, and doesn't make and misleading allusion, as it works
similarly well for socketpairs() as for pipe()s...
|
|
safe_close() automatically becomes a NOP when a negative fd is passed,
and returns -1 unconditionally. This makes it easy to write lines like
this:
fd = safe_close(fd);
Which will close an fd if it is open, and reset the fd variable
correctly.
By making use of this new scheme we can drop a > 200 lines of code that
was required to test for non-negative fds or to reset the closed fd
variable afterwards.
|
|
Already split variable assignments before invoking the callback. And
drop "rd." settings if we are not in an initrd.
|
|
In cryptsetup-generator automatic cleanup had to be replaced
with manual cleanup, and the code gets a bit longer. But existing
code had the issue that it returned negative values from main(),
which was wrong, so should be reworked anyway.
|
|
|
|
|
|
If fstab contains 1 for passno, treat this as an error, but only warn
briefly. If fstab doesn't contain this information, don't complain at
all.
Patch is complicated a bit by the fact that we might have the fstype specified
in fstab or on /proc/cmdline, in which case we can check if we have the appropriate
fsck tool, or not specified, or specified as auto, in which case we have to look
and check the type of the filesystem ourselves. It cannot be done before the
device appears, so it is too early in the generator phase, and it must be done
directly in fsck service.
|
|
|
|
Instead of individually checking for containers in each user do this
once in a new call proc_cmdline() that read the file only if we are not
in a container.
|
|
|
|
|
|
|
|
|
|
This patch changes local-fs.target and systemd-fsck to not use
"isolate" when going into emergency.
This fixes https://bugzilla.redhat.com/show_bug.cgi?id=810722
The motivation is, that when something wents wrong, we should
keep everything as it is, to let the user fix the problem. When
isolating we stop a lot of services and therefore change the
system heavily so that it gets harder for the user to fix.
An example is a crypted partition. When the fsck in a crypted
partition fails, it previously used "emergency/start/isolate"
which stops cryptsetup. Therefore if the user tries to fsck
e.g. /dev/mapper/luks-356c20ae-c7a2-4f1c-ae1d-1d290a91b691
as printed by the failing fsck, then it will not find this
device (because it got closed).
So please apply this patch to let the user see the failing
situation.
Thanks!
[zj: removed dead isolate param from start_target().]
https://bugs.freedesktop.org/show_bug.cgi?id=49463
https://bugzilla.redhat.com/show_bug.cgi?id=810722
|
