summaryrefslogtreecommitdiff
path: root/src/fstab-generator
AgeCommit message (Collapse)Author
2016-06-07fstab-generator: don't process root= if it happens to be "gpt-auto" (#3452)Lennart Poettering
As that's handled by "gpt-auto-generator". Fixes: #3404
2016-05-12Create initrd-root-device.target synchronization point (#3239)Daniel Drake
Add a synchronization point so that custom initramfs units can run after the root device becomes available, before it is fsck'd and mounted. This is useful for custom initramfs units that may modify the root disk partition table, where the root device is not known in advance (it's dynamically selected by the generators).
2016-05-02fstab-generator: add newline before we start a new unit file sectionLennart Poettering
We already did this for the [Mount] section, let's do the same for [Automount].
2016-03-04fstab-generator: fix automount option and don't start associated mount unit ↵Franck Bui
at boot Without this patch applied the mount unit with 'automount' option was still pulled by local-fs.target and thus was activated during the boot process which defeats the purpose of the 'automount' option: $ grep /mnt /etc/fstab /dev/vdb1 /mnt ext2 defaults,x-systemd.automount 0 0 $ reboot ... $ mount | grep mnt systemd-1 on /mnt type autofs (rw,relatime,fd=34,pgrp=1,timeout=0,minproto=5,maxproto=5,direct) /dev/vdb1 on /mnt type ext2 (rw,relatime) $ systemctl status mnt.mount | grep Active Active: active (mounted) since Thu 2016-03-03 21:36:22 CET; 42s ago With the patch applied: $ reboot ... $ mount | grep mnt systemd-1 on /mnt type autofs (rw,relatime,fd=22,pgrp=1,timeout=0,minproto=5,maxproto=5,direct) $ systemctl status mnt.mount | grep Active Active: inactive (dead) $ ls /mnt lost+found $ systemctl status mnt.mount | grep Active Active: active (mounted) since Thu 2016-03-03 21:47:32 CET; 4s ago
2016-02-10tree-wide: remove Emacs lines from all filesDaniel Mack
This should be handled fine now by .dir-locals.el, so need to carry that stuff in every file.
2016-01-17fstab-generator: fix ordering of /sysroot/usr mountnmartensen
According to bootup(7) and the behavior when /usr is specified in /etc/fstab, the /sysroot/usr mount should be before initrd-fs.target, not before initrd-root-fs.target.
2016-01-15fstab-generator: remove bogus conditionnmartensen
The sysroot mount is already taken care of by the add_sysroot_mount function. With this condition left in, we can get something like this: initrd-root-fs.target.requires `-- usr.mount -> /run/systemd/generator/usr.mount in the main system (i.e., not in the initramfs). In the initramfs, the previous condition already kicks in.
2015-11-25fstab-gen: post can't be NULLFranck Bui
2015-10-27util-lib: split out allocation calls into alloc-util.[ch]Lennart Poettering
2015-10-27util-lib: move /proc/cmdline parsing code to proc-cmdline.[ch]Lennart Poettering
2015-10-27util-lib: split stat()/statfs()/stavfs() related calls into stat-util.[ch]Lennart Poettering
2015-10-27util-lib: move mount related utility calls to mount-util.[ch]Lennart Poettering
2015-10-27util-lib: move more file I/O related calls into fileio.[ch]Lennart Poettering
2015-10-27util-lib: split string parsing related calls from util.[ch] into parse-util.[ch]Lennart Poettering
2015-10-25util-lib: split out fd-related operations into fd-util.[ch]Lennart Poettering
There are more than enough to deserve their own .c file, hence move them over.
2015-10-24util-lib: split our string related calls from util.[ch] into its own file ↵Lennart Poettering
string-util.[ch] There are more than enough calls doing string manipulations to deserve its own files, hence do something about it. This patch also sorts the #include blocks of all files that needed to be updated, according to the sorting suggestions from CODING_STYLE. Since pretty much every file needs our string manipulation functions this effectively means that most files have sorted #include blocks now. Also touches a few unrelated include files.
2015-09-07basic: rework virtualization detection APILennart Poettering
Introduce a proper enum, and don't pass around string ids anymore. This simplifies things quite a bit, and makes virtualization detection more similar to architecture detection.
2015-05-25swap: use swapon -oKarel Zak
This patch simplify swapon usage in systemd. The command swapon(8) since util-linux v2.26 supports "-o <list>". The idea is exactly the same like for mount(8). The -o specifies options in fstab-compatible way. For systemd it means that it does not have to care about things like "discard" or another swapon specific options. swapon -o <options-from-fstab> For backward compatibility the code cares about "Priority:" swap unit field (for a case when Priority: is set, but pri= in the Options: is missing). References: http://lists.freedesktop.org/archives/systemd-devel/2014-October/023576.html
2015-05-18fstab-generator: add x-systemd.requires and x-systemd.requires-mounts-forKarel Zak
Currently we have no way how to specify dependencies between fstab entries (or another units) in the /etc/fstab. It means that users are forced to bypass fstab and write .mount units manually. The patch introduces new systemd fstab options: x-systemd.requires=<PATH> - to specify dependence an another mount (PATH is translated to unit name) x-systemd.requires=<UNIT> - to specify dependence on arbitrary UNIT x-systemd.requires-mounts-for=<PATH ...> - to specify dependence on another paths, implemented by RequiresMountsFor=. The option may be specified more than once. For example two bind mounts where B depends on A: /mnt/test/A /mnt/test/A none bind,defaults /mnt/test/A /mnt/test/B none bind,x-systemd.requires=/mnt/test/A More complex example with overlay FS where one mount point depends on "low" and "upper" directories: /dev/sdc1 /mnt/low ext4 defaults /dev/sdc2 /mnt/high ext4 defaults overlay /mnt/merged overlay lowerdir=/mnt/low,upperdir=/mnt/high/data,workdir=/mnt/high/work,x-systemd.requires-mounts-for=/mnt/low,x-systemd.requires-mounts-for=mnt/high https://bugzilla.redhat.com/show_bug.cgi?id=812826 https://bugzilla.redhat.com/show_bug.cgi?id=1164334
2015-05-16Use fflush_and_check() in more placesZbigniew Jędrzejewski-Szmek
2015-05-05core: rework unit name validation and manipulation logicLennart Poettering
A variety of changes: - Make sure all our calls distuingish OOM from other errors if OOM is not the only error possible. - Be much stricter when parsing escaped paths, do not accept trailing or leading escaped slashes. - Change unit validation to take a bit mask for allowing plain names, instance names or template names or an combination thereof. - Refuse manipulating invalid unit name
2015-05-04generators: rename add_{root,usr}_mount to add_{sysroot,sysroot_usr}_mountZbigniew Jędrzejewski-Szmek
This makes it obvious that those functions are only usable in the initramfs. Also, add a warning when noauto, nofail, or automount is used for the root fs, instead of silently ignoring. Using those options would be a sign of significant misconfiguration, and if we bother to check for them, than let's go all the way and complain. Other various small cleanups and reformattings elsewhere.
2015-05-02fstab-generator: fix memleakZbigniew Jędrzejewski-Szmek
filtered was used to store an allocated string twice. The first allocation was thus lost. The string is not needed for anything, so simply skip the allocation. Fixup for deb0a77cf0b409141c4.
2015-04-21automount: add expire supportMichael Olbrich
2015-04-08fstab-generator: don't continue on OOMLennart Poettering
2015-03-25fstab-generator: don't accept missing root=, but accept root=noneTobias Hunger
And other non-device entries (like fstab does). Mount whatever the user asked to be mounted on / on the kernel command line. Do less sanity check and do *not* bail out when the mount device looks strange or does not exist. This basically makes the changes for deviceless filesystems from yesterday unnecessary and is in line with what we do for filesystems set up in fstab. Remove some code that is now dead (reverting fb02a2775a65 and b0438462). [tomegun: - change patch title/description a bit. - don't touch the /usr logic, that would be a separate change and we don't currently have a convincing use-case for that. - don't bail out on /sys ro. This only makes sense in containers, where we would not be doing this anyway. If there is a use-case we could consider that as a separate patch.]
2015-03-24fstab-generator: Support root on tmpfs (or other deviceless FS)Tobias Hunger
This allows for stateless systems.
2015-03-21fstab-generator: ignore invalid swap priorityZbigniew Jędrzejewski-Szmek
A failed priority is not something worth stopping boot over. Most people have only one swap device, in which case priority is irrelevant, and even if there is more than one swap device, they are all usable, and ignoring the priority field should only result in some loss of performance. The kernel will report the priority as -1 if not set, so it's easy for people to make this mistake. https://bugzilla.redhat.com/show_bug.cgi?id=1204336
2015-02-23remove unused includesThomas Hindoe Paaboel Andersen
This patch removes includes that are not used. The removals were found with include-what-you-use which checks if any of the symbols from a header is in use.
2015-02-03util: rework strappenda(), and rename it strjoina()Lennart Poettering
After all it is now much more like strjoin() than strappend(). At the same time, add support for NULL sentinels, even if they are normally not necessary.
2015-01-11Support negated fstab optionsZbigniew Jędrzejewski-Szmek
We would ignore options like "fail" and "auto", and for any option which takes a value the first assignment would win. Repeated and options equivalent to the default are rarely used, but they have been documented forever, and people might use them. Especially on the kernel command line it is easier to append a repeated or negated option at the end.
2015-01-11Add new function to filter fstab optionsZbigniew Jędrzejewski-Szmek
This fixes parsing of options in shared/generator.c. Existing code had some issues: - it would treate whitespace and semicolons as seperators. fstab(5) is pretty clear that only commas matter. And the syntax does not allow for spaces to be inserted in the field in fstab. Whitespace might be escaped, but then it should not seperate options. Treat whitespace and semicolons as any other character. - it assumed that x-systemd.device-timeout would always be followed by "=". But this is not guaranteed, hasmntopt will return this option even if there's no value. Uninitialized memory could be read. - some error paths would log, and inconsistently, some would just return an error code. Filtering is split out to a separate function and tests are added. Similar code paths in other places are adjusted to use the new function.
2015-01-05fstab-generator: use more appropriate checks for swap and device availabilityLennart Poettering
We always should use the same checks when deciding whether swap support and mounting of devices is supported. Hence, let's make fstab-generator's logic more similar to the usual logic we follow: a) Look for /proc/swaps and no container support before activating swaps. b) Look for /sys being writable befire supporting device mounts.
2014-12-09fstab-generator: Allow mount.usr without mount.usrflags, honor rw/roMichael Marineau
There is no need to require mount.usrflags. The original implementation assumed that a btrfs subvolume would always be needed but that is not applicable to systems that do not use btrfs for /usr. Similar to using rootflags= for the default of mount.usrflags=, append the classic 'ro' and 'rw' flags to the mount options.
2014-12-09fstab-generator: free all allocated stringsLennart Poettering
2014-11-28treewide: another round of simplificationsMichal Schmidt
Using the same scripts as in f647962d64e "treewide: yet more log_*_errno + return simplifications".
2014-11-28treewide: use log_*_errno whenever %m is in the format stringMichal Schmidt
If the format string contains %m, clearly errno must have a meaningful value, so we might as well use log_*_errno to have ERRNO= logged. Using: find . -name '*.[ch]' | xargs sed -r -i -e \ 's/log_(debug|info|notice|warning|error|emergency)\((".*%m.*")/log_\1_errno(errno, \2/' Plus some whitespace, linewrap, and indent adjustments.
2014-11-28treewide: more log_*_errno + return simplificationsMichal Schmidt
2014-11-28treewide: no need to negate errno for log_*_errno()Michal Schmidt
It corrrectly handles both positive and negative errno values.
2014-11-28treewide: auto-convert the simple cases to log_*_errno()Michal Schmidt
As a followup to 086891e5c1 "log: add an "error" parameter to all low-level logging calls and intrdouce log_error_errno() as log calls that take error numbers", use sed to convert the simple cases to use the new macros: find . -name '*.[ch]' | xargs sed -r -i -e \ 's/log_(debug|info|notice|warning|error|emergency)\("(.*)%s"(.*), strerror\(-([a-zA-Z_]+)\)\);/log_\1_errno(-\4, "\2%m"\3);/' Multi-line log_*() invocations are not covered. And we also should add log_unit_*_errno().
2014-11-26swap: restore support for nofailZbigniew Jędrzejewski-Szmek
systemd stops adding automatic dependencies on swap.target to swap units. If a dependency is required, it has to be added by unit configuration. fstab-generator did that already, except that now it is modified to create a Requires or Wants type dependency, depending on whether nofail is specified in /etc/fstab. This makes .swap units obey the nofail/noauto options more or less the same as .mount units. Documentation is extended to clarify that, and to make systemd.mount(5) and system.swap(5) more similar. The gist is not changed, because current behaviour actually matches existing documentation. https://bugs.freedesktop.org/show_bug.cgi?id=86488
2014-11-07util: simplify proc_cmdline() to reuse get_process_cmdline()Lennart Poettering
Also, make all parsing of the kernel cmdline non-fatal.
2014-11-06s/commandline/command line/gHarald Hoyer
2014-10-28swap: replace Discard= setting by a more generic Options= settingLennart Poettering
For now, it's systemd itself that parses the options string, but as soon as util-linux' swapon can take the option string directly with -o we should pass it on unmodified.
2014-10-10fstab-generator: Honor mount.usr*= on kernel command lineTobias Hunger
This allows to configure boot loader entries for systems where the root and usr filesystems are in different subvolumes (or even on different drives).
2014-10-03fstab-generator: Small cleanupTobias Hunger
2014-09-29fstab-generator: properly deal with discard as non-last optionZbigniew Jędrzejewski-Szmek
Previous code would only return correct results when discard was the last option. While at it, avoid incorrect behaviour for (invalid) 'pri' option not followed by '=...', and also do not return -1 as the error code.
2014-09-29swap: introduce Discard propertyJan Synacek
Process possible "discard" values from /etc/fstab.
2014-08-13util: allow strappenda to take any number of argsDave Reisner
This makes strappenda3 redundant, so we remove its usage and definition. Add a few tests along the way for sanity.
2014-07-07fstab-generator: fix trivial leakZbigniew Jędrzejewski-Szmek