summaryrefslogtreecommitdiff
path: root/src/journal-remote/journal-gatewayd.c
AgeCommit message (Collapse)Author
2016-04-22coredump,basic: generalize O_TMPFILE handling a bitLennart Poettering
This moves the O_TMPFILE handling from the coredumping code into common library code, and generalizes it as open_tmpfile_linkable() + link_tmpfile(). The existing open_tmpfile() function (which creates an unlinked temporary file that cannot be linked into the fs) is renamed to open_tmpfile_unlinkable(), to make the distinction clear. Thus, code may now choose between: a) open_tmpfile_linkable() + link_tmpfile() b) open_tmpfile_unlinkable() Depending on whether they want a file that may be linked back into the fs later on or not. In a later commit we should probably convert fopen_temporary() to make use of open_tmpfile_linkable(). Followup for: #3065
2016-02-10tree-wide: remove Emacs lines from all filesDaniel Mack
This should be handled fine now by .dir-locals.el, so need to carry that stuff in every file.
2016-01-20journal-gatewayd: fix offsetZbigniew Jędrzejewski-Szmek
I was checking something when writing the patch and committed this by mistake.
2016-01-18journal-remote: update to 64bit µhttp api, provide fallbackZbigniew Jędrzejewski-Szmek
64 bit offset is now accepted, which is nice. The old function is deprecated, and generates a compile time warning when used. We only use an offset of 0, so we really don't care. Adapt to use the new function, but fall back to the old one on older versions.
2016-01-18journal-remote: fix warning about deprecated µhttpd macroZbigniew Jędrzejewski-Szmek
src/journal-remote/journal-remote.c:590:13: warning: Value MHD_HTTP_METHOD_NOT_ACCEPTABLE is deprecated, use MHD_HTTP_NOT_ACCEPTABLE return mhd_respond(connection, MHD_HTTP_METHOD_NOT_ACCEPTABLE, ^ The new define was added in 0.9.38. Instead of requiring the new libmicrohttpd version, provide the fallback, it is trivial.
2015-12-14journal-gatewayd: timeout journal wait to allow thread cleanupDan Dedrick
When a client connects with follow=1 and then disconnects we can get stuck in sd_journal_wait indefinitely if no journal messages are logged. Every time a client does this another thread is allocated and these continue to stack until either a journal message is logged or we run out of mapping to put a stack in. By adding a timeout if we don't see any journal messages in that timeout we will simply pop back out to microhttpd which will sanity check the connection for us and if it is still connected pop us back into the wait for more journal messages.
2015-11-27tree-wide: expose "p"-suffix unref calls in public APIs to make gcc cleanup easyLennart Poettering
GLIB has recently started to officially support the gcc cleanup attribute in its public API, hence let's do the same for our APIs. With this patch we'll define an xyz_unrefp() call for each public xyz_unref() call, to make it easy to use inside a __attribute__((cleanup())) expression. Then, all code is ported over to make use of this. The new calls are also documented in the man pages, with examples how to use them (well, I only added docs where the _unref() call itself already had docs, and the examples, only cover sd_bus_unrefp() and sd_event_unrefp()). This also renames sd_lldp_free() to sd_lldp_unref(), since that's how we tend to call our destructors these days. Note that this defines no public macro that wraps gcc's attribute and makes it easier to use. While I think it's our duty in the library to make our stuff easy to use, I figure it's not our duty to make gcc's own features easy to use on its own. Most likely, client code which wants to make use of this should define its own: #define _cleanup_(function) __attribute__((cleanup(function))) Or similar, to make the gcc feature easier to use. Making this logic public has the benefit that we can remove three header files whose only purpose was to define these functions internally. See #2008.
2015-10-27util-lib: split out allocation calls into alloc-util.[ch]Lennart Poettering
2015-10-27util-lib: split string parsing related calls from util.[ch] into parse-util.[ch]Lennart Poettering
2015-10-25util-lib: split out fd-related operations into fd-util.[ch]Lennart Poettering
There are more than enough to deserve their own .c file, hence move them over.
2015-09-30journal: make sure to set MHD_USE_PIPE_FOR_SHUTDOWN for libmicrohttpd serversLennart Poettering
This makes sure libmicrohttpd won't call shutdown() on our listening sockets, which make sure socket activation and re-activation will work cleanly. See: https://github.com/systemd/systemd/pull/1286 https://lists.gnu.org/archive/html/libmicrohttpd/2015-09/msg00014.html Fixes #1286
2015-09-29util: introduce common version() implementation and use it everywhereLennart Poettering
This also allows us to drop build.h from a ton of files, hence do so. Since we touched the #includes of those files, let's order them properly according to CODING_STYLE.
2015-09-09util: introduce safe_fclose() and port everything over to itLennart Poettering
Adds a coccinelle script to port things over automatically.
2015-09-09tree-wide: drop {} from one-line if blocksLennart Poettering
Patch via coccinelle.
2015-09-09tree-wide: use coccinelle to patch a lot of code to use mfree()Lennart Poettering
This replaces this: free(p); p = NULL; by this: p = mfree(p); Change generated using coccinelle. Semantic patch is added to the sources.
2015-08-17Bug #944: Deletion of unnecessary checks before a few calls of systemd functionsMarkus Elfring
The following functions return immediately if a null pointer was passed. * calendar_spec_free * link_address_free * manager_free * sd_bus_unref * sd_journal_close * udev_monitor_unref * udev_unref It is therefore not needed that a function caller repeats a corresponding check. This issue was fixed by using the software Coccinelle 1.0.1.
2015-08-05hostname-util: get rid of unused parameter of hostname_cleanup()Zbigniew Jędrzejewski-Szmek
All users are now setting lowercase=false.
2015-07-07journal-gatewayd: fix tmpfile logicDaniel Mack
"rw" is not a valid mode string for f*open(). This got broken in cc02a7b33049 ("journal-gatewayd: factor out opening of temp file").
2015-05-18util: split all hostname related calls into hostname-util.cLennart Poettering
2015-04-12journal-gatewayd: use (void) to silence coverityZbigniew Jędrzejewski-Szmek
CID #996297.
2015-03-27fix gcc warnings about uninitialized variablesHarald Hoyer
like: src/shared/install.c: In function ‘unit_file_lookup_state’: src/shared/install.c:1861:16: warning: ‘r’ may be used uninitialized in this function [-Wmaybe-uninitialized] return r < 0 ? r : state; ^ src/shared/install.c:1796:13: note: ‘r’ was declared here int r; ^
2015-03-15journal-gatewayd: factor out opening of temp fileZbigniew Jędrzejewski-Szmek
Also use our own mkostemp wrapper, which tries to use O_TMPFILE.
2015-03-13µhttp-util: setup gnutls logs in one functionZbigniew Jędrzejewski-Szmek
2015-01-05journal: install sigbus handler for journal tools tooLennart Poettering
This makes them robust regarding truncation. Ideally, we'd export this as an API, but given how messy SIGBUS handling is, and the uncertain ownership logic of signal handlers we should not do this (unless libc one day invents a scheme how to sanely install SIGBUS handlers for specific memory areas only). However, for now we can still make all our own tools robust. Note that external tools will only have read-access to the journal anyway, where SIGBUS is much more unlikely, given that only writes are subject to disk full problems.
2014-11-28treewide: use log_*_errno whenever %m is in the format stringMichal Schmidt
If the format string contains %m, clearly errno must have a meaningful value, so we might as well use log_*_errno to have ERRNO= logged. Using: find . -name '*.[ch]' | xargs sed -r -i -e \ 's/log_(debug|info|notice|warning|error|emergency)\((".*%m.*")/log_\1_errno(errno, \2/' Plus some whitespace, linewrap, and indent adjustments.
2014-11-28treewide: more log_*_errno + return simplificationsMichal Schmidt
2014-11-28treewide: no need to negate errno for log_*_errno()Michal Schmidt
It corrrectly handles both positive and negative errno values.
2014-11-28treewide: auto-convert the simple cases to log_*_errno()Michal Schmidt
As a followup to 086891e5c1 "log: add an "error" parameter to all low-level logging calls and intrdouce log_error_errno() as log calls that take error numbers", use sed to convert the simple cases to use the new macros: find . -name '*.[ch]' | xargs sed -r -i -e \ 's/log_(debug|info|notice|warning|error|emergency)\("(.*)%s"(.*), strerror\(-([a-zA-Z_]+)\)\);/log_\1_errno(-\4, "\2%m"\3);/' Multi-line log_*() invocations are not covered. And we also should add log_unit_*_errno().
2014-08-03Unify parse_argv styleZbigniew Jędrzejewski-Szmek
getopt is usually good at printing out a nice error message when commandline options are invalid. It distinguishes between an unknown option and a known option with a missing arg. It is better to let it do its job and not use opterr=0 unless we actually want to suppress messages. So remove opterr=0 in the few places where it wasn't really useful. When an error in options is encountered, we should not print a lengthy help() and overwhelm the user, when we know precisely what is wrong with the commandline. In addition, since help() prints to stdout, it should not be used except when requested with -h or --help. Also, simplify things here and there.
2014-07-15journal-remote: allow splitting incoming logs by source hostZbigniew Jędrzejewski-Szmek
Previously existing scheme where the file name would be based on the source was just too ugly and unpredicatable. Now there are only two options: 1. just one file (until rotation), 2. one file per source host, using the hostname as filename part. For the cases where the source is specified by the user, only option one is allowed, and the full of the file must be specified.
2014-07-15Move network-related journal programs to src/journal-remote/Zbigniew Jędrzejewski-Szmek
Directory src/journal has become one of the largest directories, and since systemd-journal-gatewayd, systemd-journal-remote, and forthcoming systemd-journal-upload are all closely related, create a separate directory for them.