| Age | Commit message (Collapse) | Author |
|---|
|
This patch removes includes that are not used. The removals were found with
include-what-you-use which checks if any of the symbols from a header is
in use.
|
|
Found by Valgrind while testing the previous memory leak fix.
|
|
The output of gnutls_certificate_verification_status_print() needs to be
freed.
Noticed this while staring at verify_cert_authorized() to see what could
possibly confuse gcc5 on armv7hl to segfault during compilation.
|
|
After all it is now much more like strjoin() than strappend(). At the
same time, add support for NULL sentinels, even if they are normally not
necessary.
|
|
If we scale our buffer to be wide enough for the format string, we
should expect that the calculation was correct.
char_array_0() invocations are removed, since snprintf nul-terminates
the output in any case.
A similar wrapper is used for strftime calls, but only in timedatectl.c.
|
|
Types used for pids and uids in various interfaces are unpredictable.
Too bad.
|
|
https://bugs.freedesktop.org/show_bug.cgi?id=86464
|
|
This makes them robust regarding truncation. Ideally, we'd export this
as an API, but given how messy SIGBUS handling is, and the uncertain
ownership logic of signal handlers we should not do this (unless libc
one day invents a scheme how to sanely install SIGBUS handlers for
specific memory areas only). However, for now we can still make all our
own tools robust.
Note that external tools will only have read-access to the journal
anyway, where SIGBUS is much more unlikely, given that only writes are
subject to disk full problems.
|
|
cppcheck would give up with "syntax error" without them. This led
to reports of syntax errors in unrelated locations and potentially
hid other errors
|
|
|
|
Using the same scripts as in f647962d64e "treewide: yet more log_*_errno
+ return simplifications".
|
|
If the format string contains %m, clearly errno must have a meaningful
value, so we might as well use log_*_errno to have ERRNO= logged.
Using:
find . -name '*.[ch]' | xargs sed -r -i -e \
's/log_(debug|info|notice|warning|error|emergency)\((".*%m.*")/log_\1_errno(errno, \2/'
Plus some whitespace, linewrap, and indent adjustments.
|
|
Using:
find . -name '*.[ch]' | while read f; do perl -i.mmm -e \
'local $/;
local $_=<>;
s/(if\s*\([^\n]+\))\s*{\n(\s*)(log_[a-z_]*_errno\(\s*([->a-zA-Z_]+)\s*,[^;]+);\s*return\s+\g4;\s+}/\1\n\2return \3;/msg;
print;'
$f
done
And a couple of manual whitespace fixups.
|
|
|
|
|
|
Basically:
find . -name '*.[ch]' | while read f; do perl -i.mmm -e \
'local $/;
local $_=<>;
s/log_(debug|info|notice|warning|error|emergency)\("([^"]*)%s"([^;]*),\s*strerror\(-?([->a-zA-Z_]+)\)\);/log_\1_errno(\4, "\2%m"\3);/gms;print;' \
$f; done
Plus manual indentation fixups.
|
|
It corrrectly handles both positive and negative errno values.
|
|
As a followup to 086891e5c1 "log: add an "error" parameter to all
low-level logging calls and intrdouce log_error_errno() as log calls
that take error numbers", use sed to convert the simple cases to use
the new macros:
find . -name '*.[ch]' | xargs sed -r -i -e \
's/log_(debug|info|notice|warning|error|emergency)\("(.*)%s"(.*), strerror\(-([a-zA-Z_]+)\)\);/log_\1_errno(-\4, "\2%m"\3);/'
Multi-line log_*() invocations are not covered.
And we also should add log_unit_*_errno().
|
|
- Rename log_meta() → log_internal(), to follow naming scheme of most
other log functions that are usually invoked through macros, but never
directly.
- Rename log_info_object() to log_object_info(), simply because the
object should be before any other parameters, to follow OO-style
programming style.
|
|
log_error_errno() as log calls that take error numbers
This change has two benefits:
- The format string %m will now resolve to the specified error (or to
errno if the specified error is 0. This allows getting rid of a ton of
strerror() invocations, a function that is not thread-safe.
- The specified error can be passed to the journal in the ERRNO= field.
Now of course, we just need somebody to convert all cases of this:
log_error("Something happened: %s", strerror(-r));
into thus:
log_error_errno(-r, "Something happened: %m");
|
|
This should make the unquoting scheme a bit less naive.
|
|
|
|
To mirror the recent name change of the concept for sd_bus objects,
follow the same logic for sd_event_source objects, too.
|
|
Even when termninated normally, systemd-journal-upload would return
something positive which would be interpreted as failure.
|
|
Repetetive messages can be annoying when running with
SYSTEMD_LOG_LEVEL=debug, but they are sometimes very useful
when debugging problems. Add log_trace which is like log_debug
but becomes a noop unless LOG_TRACE is defined during compilation.
This makes it easy to enable very verbose logging for a subset
of programs when compiling from source.
|
|
|
|
Precision of INT_MAX does not work as I expected it to.
https://bugzilla.redhat.com/show_bug.cgi?id=1154334
|
|
Do our best verify that we can actually write the state file
before upload commences to avoid duplicate messages on the server.
|
|
|
|
Return a proper code instead of simply NULL for failure.
|
|
|
|
|
|
This possibility was recently added, and it makes debugging much nicer.
|
|
|
|
|
|
In the conversion to sd-event loop, handling of normal files got
broken. We do not want to perform non-blocking reads on them, but
simply do read() in a loop. Install a statically-enabled "source"
to do that.
|
|
After recent changes the number was always reported as 0, because
the accounting was done server_destroy(), called after the message was
already printed. But even before this change, the counts were wrong
because seqnum start at 0 only for newly created journal files, so when
appending to existing files, the calculated count was wrong anyway.
Also do some variable renaming for consistency and disable some low-level
debug messages.
|
|
https://bugs.freedesktop.org/show_bug.cgi?id=83682
[zj: move the initalization even earlier, before any sockets are
looked at.]
|
|
Handle sd_event_default returning error and bail out properly
as done in every other caller of this function.
Found by coverity. Fixes: CID#1238957
|
|
When compiling we see this curl warning popping up:
src/journal-remote/journal-upload.c:194:17: warning: call to
‘_curl_easy_setopt_err_error_buffer’ declared with attribute
warning: curl_easy_setopt expects a char buffer of CURL_ERROR_SIZE
as argument for this option [enabled by default]
This patch removes the warning (which occurs twice).
|
|
It is redundant to store 'hash' and 'compare' function pointers in
struct Hashmap separately. The functions always comprise a pair.
Store a single pointer to struct hash_ops instead.
systemd keeps hundreds of hashmaps, so this saves a little bit of
memory.
|
|
|
|
|
|
|
|
|
|
|
|
align --help texts
Negative switches are a bad un-normalized thing. We alerady have some,
but we should try harder to avoid intrdoucing new ones.
Hence, instead of adding two switches:
--foobar
--no-foobar
Let's instead use the syntax
--foobar
--foobar=yes
--foobar=no
Where the first two are equivalent. The boolean argument is parsed
following the usual rules.
Change all new negative switches this way.
This patch also properly aligns the --help table, so that single char
switches always get a column separate of the long switches.
|
|
|
|
getopt is usually good at printing out a nice error message when
commandline options are invalid. It distinguishes between an unknown
option and a known option with a missing arg. It is better to let it
do its job and not use opterr=0 unless we actually want to suppress
messages. So remove opterr=0 in the few places where it wasn't really
useful.
When an error in options is encountered, we should not print a lengthy
help() and overwhelm the user, when we know precisely what is wrong
with the commandline. In addition, since help() prints to stdout, it
should not be used except when requested with -h or --help.
Also, simplify things here and there.
|
|
|
