| Age | Commit message (Collapse) | Author |
|---|
|
Throughout the tree there's spurious use of spaces separating ++ and --
operators from their respective operands. Make ++ and -- operator
consistent with the majority of existing uses; discard the spaces.
|
|
Various buffers were lost because finish_item() either consumed
the buffer or allocated a new one (if an entry with the same key existed).
The caller would simply forget the buffer in either case.
Also add a check for the case when a valid identifier is followed by
an empty body. We should not allow this.
Also be more consistent in error handling and always print an error
message.
|
|
This should be handled fine now by .dir-locals.el, so need to carry that
stuff in every file.
|
|
Instead of discarding duplicate catalog entries, we now combine
them. This allows software or admins to add or override catalog
headers, or add additional text to the catalog message.
|
|
with small manual cleanups for style.
|
|
Our functions return negative error codes.
Do not rely on errno being set after calling our own functions.
|
|
This replaces the use of ftell() with ftello() for 64-bit size on all
archs.
Also drops a pointless check for NULL before calling strbuf_cleanup().
|
|
write_catalog() use the hashmap only to get its size. The size is
already given in parameter 'n'.
|
|
|
|
|
|
We don't need two functions that do essentialy the same, hence drop
path_get_parent(), and stick to dirname_malloc(), but move it to
path-util.[ch].
|
|
There are more than enough to deserve their own .c file, hence move them
over.
|
|
string-util.[ch]
There are more than enough calls doing string manipulations to deserve
its own files, hence do something about it.
This patch also sorts the #include blocks of all files that needed to be
updated, according to the sorting suggestions from CODING_STYLE. Since
pretty much every file needs our string manipulation functions this
effectively means that most files have sorted #include blocks now.
Also touches a few unrelated include files.
|
|
All our hash functions are based on siphash24(), factor out
siphash_init() and siphash24_finalize() and pass the siphash
state to the hash functions rather than the hash key.
This simplifies the hash functions, and in particular makes
composition simpler as calling siphash24_compress() repeatedly
on separate chunks of input has the same effect as first
concatenating the input and then calling siphash23_compress()
on the result.
|
|
Let's clean up our tree a bit, and reduce invocations of the
thread-unsafe strerror() by replacing it with printf()'s %m specifier.
|
|
Pretty trivial helper which wraps free() but returns NULL, so we can
simplify this:
free(foobar);
foobar = NULL;
to this:
foobar = mfree(foobar);
|
|
Some places invoked fflush() directly with their own manual error
checking, let's unify all that by using fflush_and_check().
This also unifies the general error paths of fflush()+rename() file
writers.
|
|
like:
src/shared/install.c: In function ‘unit_file_lookup_state’:
src/shared/install.c:1861:16: warning: ‘r’ may be used uninitialized in
this function [-Wmaybe-uninitialized]
return r < 0 ? r : state;
^
src/shared/install.c:1796:13: note: ‘r’ was declared here
int r;
^
|
|
This patch removes includes that are not used. The removals were found with
include-what-you-use which checks if any of the symbols from a header is
in use.
|
|
|
|
Using the same scripts as in f647962d64e "treewide: yet more log_*_errno
+ return simplifications".
|
|
If the format string contains %m, clearly errno must have a meaningful
value, so we might as well use log_*_errno to have ERRNO= logged.
Using:
find . -name '*.[ch]' | xargs sed -r -i -e \
's/log_(debug|info|notice|warning|error|emergency)\((".*%m.*")/log_\1_errno(errno, \2/'
Plus some whitespace, linewrap, and indent adjustments.
|
|
|
|
Basically:
find . -name '*.[ch]' | while read f; do perl -i.mmm -e \
'local $/;
local $_=<>;
s/log_(debug|info|notice|warning|error|emergency)\("([^"]*)%s"([^;]*),\s*strerror\(-?([->a-zA-Z_]+)\)\);/log_\1_errno(\4, "\2%m"\3);/gms;print;' \
$f; done
Plus manual indentation fixups.
|
|
It corrrectly handles both positive and negative errno values.
|
|
As a followup to 086891e5c1 "log: add an "error" parameter to all
low-level logging calls and intrdouce log_error_errno() as log calls
that take error numbers", use sed to convert the simple cases to use
the new macros:
find . -name '*.[ch]' | xargs sed -r -i -e \
's/log_(debug|info|notice|warning|error|emergency)\("(.*)%s"(.*), strerror\(-([a-zA-Z_]+)\)\);/log_\1_errno(-\4, "\2%m"\3);/'
Multi-line log_*() invocations are not covered.
And we also should add log_unit_*_errno().
|
|
It is redundant to store 'hash' and 'compare' function pointers in
struct Hashmap separately. The functions always comprise a pair.
Store a single pointer to struct hash_ops instead.
systemd keeps hundreds of hashmaps, so this saves a little bit of
memory.
|
|
... it turns out that the duplicates in our own catalog were not real
duplicates, but translations.
|
|
- Negative/positive errno mixup caused duplicates not to be detected properly.
Now we get a warning about some duplicate entries in our own catalogs...
- Errors in update_catalog would be ignored, but they should not be.
|
|
safe_close() automatically becomes a NOP when a negative fd is passed,
and returns -1 unconditionally. This makes it easy to write lines like
this:
fd = safe_close(fd);
Which will close an fd if it is open, and reset the fd variable
correctly.
By making use of this new scheme we can drop a > 200 lines of code that
was required to test for non-negative fds or to reset the closed fd
variable afterwards.
|
|
SipHash appears to be the new gold standard for hashing smaller strings
for hashtables these days, so let's make use of it.
|
|
Detection would fail if language was not specified in the filename
but a dot appeared somewhere higher in the path.
|
|
|
|
This extends 62678ded 'efi: never call qsort on potentially
NULL arrays' to all other places where qsort is used and it
is not obvious that the count is non-zero.
|
|
http://lists.freedesktop.org/archives/systemd-devel/2013-April/010510.html
|
|
https://bugs.freedesktop.org/show_bug.cgi?id=63477
|
|
In order to write tests for the catalog functions, they
are made non-static and start taking a 'database' parameter,
which is the name of a file with the preprocessed catalog
entries.
This makes it possible to make test-catalog part of the
normal test suite, since it now only operates on files
in /tmp.
Some more tests are added.
|
|
Coverity complains: systemd-199/src/journal/catalog.c:126:
buffer_size_warning: Calling strncpy with a maximum size argument of
32 bytes on destination array "i->language" of size 32 bytes might
leave the destination string unterminated.
...and unfortunately it was right. The string was defined as a
fixed-size string in some parts of the code, and used a
null-terminated string in others (e.g. in log statements). There's no
point in conserving one byte, so just define the max language tag
length to 31 bytes, and use null terminated strings everywhere.
Also, wrap some lines, zero-fill less bytes, use '\0' instead of just
0 to be more explicit that this is one byte.
|
|
Previously r was set to zero and so if(r<0) was never true.
|
|
It does not make sense to print error code from previous loop.
|
|
The ability to dump catalog entries in full and by id is added.
|
|
|
|
The path doesn't change in the standard configuration.
Also, give full path to the journalctl binary in the hook,
since it might be installed outside of $PATH.
Also, add uninstall hook to remove the binary catalog.
|
|
Some filesystem magics are too big to fit in 31 bits,
and are wrapped to negative. f_type is an int on 32 bits, so
it is signed, and we get a warning on comparison.
|
|
|
|
Also add informational message about catalog size.
|
|
follow the rest of the file formats
|
|
The message catalog can be used to attach short help texts to log lines,
keyed by their MESSAGE_ID= fields. This is useful to help the
administrator understand the context and cause of a message, find
possible solutions and find further related documentation.
Since this is keyed off MESSAGE_ID= this will only work for native
journal messages.
The message catalog supports i18n, and is useful to augment english
language system messages with explanations in the local language.
This commit only includes short explanatory messages for a few example
message IDs, we'll add more complete documentation for the relevant
systemd messages later on.
|
