| Age | Commit message (Collapse) | Author |
|---|
|
Our write pattern is quite awful for CoW file systems (btrfs...), as we
keep updating file parts in the beginning of the file. This results in
fragmented journal files. Hence: when rotating files, defragment them,
since at that point we know that no further write accesses will be made.
|
|
deleted, rotate
https://bugzilla.redhat.com/show_bug.cgi?id=1171719
|
|
Even though we use fallocate() it appears that file systems like btrfs
will trigger SIGBUS on certain low-disk-space situation. We should
handle that, hence catch the signal, add it to a list of invalidated
pages, and replace the page with an empty memory area. After each write
check if SIGBUS was triggered, and consider the write invalid if it was.
This should make journald a lot more robust with file systems where
fallocate() is not reliable, for example all CoW file systems
(btrfs...), where changing written data can fail with disk full errors.
https://bugzilla.redhat.com/show_bug.cgi?id=1045810
|
|
The current offset is sufficient information.
|
|
If from a previous iteration we know we are at the end of a journal
file, don't bother looking into the file again. This is complicated by
the fact that the EOF does not have to be permanent (think of
"journalctl -f"). So we also check if the number of entries in the
journal file changed.
This optimization has a similar effect as "journal: optimize iteration:
skip whole files behind current location" had.
|
|
When comparing the locations of candidate entries, we can rely on the
location information stored in struct JournalFile.
|
|
In next_beyond_location() when we find a candidate entry in a journal
file, save its location information in struct JournalFile.
The purpose of remembering the locations of candidate entries is to be
able to save work in the next iteration. This patch does only the
remembering part.
LOCATION_SEEK means the location identifies a candidate entry.
When a winner is picked from among candidates, it becomes
LOCATION_DISCRETE.
LOCATION_TAIL here signifies we've iterated the file to the end (or the
beginning in the case of reversed direction).
|
|
|
|
In preparation for individual JournalFiles maintaining a location
of their own.
|
|
Its only caller is a test.
|
|
|
|
|
|
It has no other callers. It does not need to be in the header file.
|
|
The only user is sd_journal_enumerate_unique() and, as explained in
the previous commit (fed67c38e3 "journal: map objects to context set by
caller, not by actual object type"), the use of them there is now
superfluous. Let's remove them.
This reverts major parts of commits:
ae97089d49 journal: fix access to munmapped memory in
sd_journal_enumerate_unique
06cc69d44c sd-journal: fix sd_journal_enumerate_unique skipping values
Tested with an "--enable-debug" build and "journalctl --list-boots".
It gives the expected number of results. Additionally, if I then revert
the previous commit ("journal: map objects to context set by caller, not
to actual object type"), it crashes with SIGSEGV, as expected.
|
|
The order of entries may matter here. Oldest entries are evicted first
when the cache is full.
(Though I don't see anything to rejuvenate entries on cache hits.)
|
|
sd_journal_enumerate_unique will lock its mmap window to prevent it
from being released by calling mmap_cache_get with keep_always=true.
This call may return windows that are wider, but compatible with the
parameters provided to it.
This can result in a mismatch where the window to be released cannot
properly be selected, because we have more than one window matching the
parameters of mmap_cache_release. Therefore, introduce a release_cookie
to be used when releasing the window.
https://bugs.freedesktop.org/show_bug.cgi?id=79380
|
|
|
|
mmap code crashes when attempting to map an object of zero size.
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=758392
https://bugs.freedesktop.org/show_bug.cgi?id=82894
|
|
They have different size on 32 bit, so they are really not interchangable.
|
|
In practice this shouldn't make much difference, but
sometimes our headers might be newer, and we want to
test them.
|
|
Add liblz4 as an optional dependency when requested with --enable-lz4,
and use it in preference to liblzma for journal blob and coredump
compression. To retain backwards compatibility, XZ is used to
decompress old blobs.
Things will function correctly only with lz4-119.
Based on the benchmarks found on the web, lz4 seems to be the best
choice for "quick" compressors atm.
For pkg-config status, see http://code.google.com/p/lz4/issues/detail?id=135.
|
|
Before, journald would remove journal files until both MaxUse= and
KeepFree= settings would be satisfied. The first one depends (if set
automatically) on the size of the file system and is constant. But
the second one depends on current use of the file system, and a spike
in disk usage would cause journald to delete journal files, trying to
reach usage which would leave 15% of the disk free. This behaviour is
surprising for the user who doesn't expect his logs to be purged when
disk usage goes above 85%, which on a large disk could be some
gigabytes from being full. In addition attempting to keep 15% free
provides an attack vector where filling the disk sufficiently disposes
of almost all logs.
Instead, obey KeepFree= only as a limit on adding additional files.
When replacing old files with new, ignore KeepFree=. This means that
if journal disk usage reached some high point that at some later point
start to violate the KeepFree= constraint, journald will not add files
to go above this point, but it will stay (slightly) below it. When
journald is restarted, it forgets the previous maximum usage value,
and sets the limit based on the current usage, so if disk remains to
be filled, journald might use one journal-file-size less on each
restart, if restarts happen just after rotation. This seems like a
reasonable compromise between implementation complexity and robustness.
|
|
sd_j_e_u needs to keep a reference to an object while comparing it
with possibly duplicate objects in other files. Because the size of
mmap cache is limited, with enough files and object to compare to,
at some point the object being compared would be munmapped, resulting
in a segmentation fault.
Fix this issue by turning keep_always into a reference count that can
be increased and decreased. Other callers which set keep_always=true
are unmodified: their references are never released but are ignored
when the whole file is closed, which happens at some point. keep_always
is increased in sd_j_e_u and later on released.
|
|
|
|
"make check-api-unused" informs us about code that is not used anymore
or that is exported but only used internally. Fix these all over the
place.
|
|
The fields in JournalFile are moved around to avoid wasting
7 bytes because of alignment.
|
|
I'm assuming that it's fine if a _const_ or _pure_ function
calls assert. It is assumed that the assert won't trigger,
and even if it does, it can only trigger on the first call
with a given set of parameters, and we don't care if the
compiler moves the order of calls.
|
|
Add option to force journal sync with fsync. Default timeout is 5min.
Interval configured via SyncIntervalSec option at journal.conf. Synced
journal files will be marked as OFFLINE.
Manual sync can be performed via sending SIGUSR1.
|
|
When traversing entry array chains for a bisection or for retrieving an
item by index we previously always started at the beginning of the
chain. Since we tend to look at the same chains repeatedly, let's cache
where we have been the last time, and maybe we can skip ahead with this
the next time.
This turns most bisections and index lookups from O(log(n)*log(n)) into
O(log(n)). More importantly however, we seek around on disk much less,
which is good to reduce buffer cache and seek times on rotational disks.
|
|
entries of the journal
The new 'unique' API allows listing all unique field values that a field
specified by a field name can take in all entries of the journal. This
allows answering queries such as "What units logged to the journal?",
"What hosts have logged into the journal?", "Which boot IDs have logged
into the journal?".
Ultimately this allows implementation of tools similar to lastlog based
on journal data.
Note that listing these field values will not work for journal files
created with older journald, as the field values are not indexed in
older files.
|
|
This also enables time-based rotation (but not vacuuming) after 1month,
so that not more one month of journal is lost at a time per vacuuming.
|
|
|
|
|
|
|
|
|
|
Let's clean up our terminology a bit. New terminology:
FSS = Forward Secure Sealing
FSPRG = Forward Secure Pseudo-Random Generator
FSS is the combination of FSPRG and a HMAC.
Sealing = process of adding authentication tags to the journal.
Verification = process of checking authentication tags to the journal.
Sealing Key = The key used for adding authentication tags to the journal.
Verification Key = The key used for checking authentication tags of the journal.
Key pair = The pair of Sealing Key and Verification Key
Internally, the Sealing Key is the combination of the FSPRG State plus
change interval/start time.
Internally, the Verification Key is the combination of the FSPRG Seed
plus change interval/start time.
|
|
|
|
warning: declaration of 'mmap' shadows a global declaration [-Wshadow]
|
|
|
|
|
|
instead of having one simple per-file cache implement an more
comprehensive one that works for multiple files and can actually
maintain multiple maps per file and per object type.
|
|
|
|
This adds forward-secure authentication of journal files. This patch
includes key generation as well as tagging of journal files,
Verification of journal files will be added in a later patch.
|
|
#pragma once has been "un-deprecated" in gcc since 3.3, and is widely supported
in other compilers.
I've been using and maintaining (rebasing) this patch for a while now, as
it annoyed me to see #ifndef fooblahfoo, etc all over the place,
almost arrogant about the annoyance of having to define all these names to
perform a commen but neccicary functionality, when a completely superior
alternative exists.
I havn't sent it till now, cause its kindof a style change, and it is bad
voodoo to mess with style that has been established by more established
editors. So feel free to lambast me as a crazy bafoon.
v2 - preserve externally used headers
|
|
The default of 2047 hash table entries turned out to result in way too
many collisions for bigger files, hence scale the hash table size by the
estimated maximum file size.
|
|
Previously, when the main data hash table grows too full the performance
simply started to decrease drastically. Instead, now simply rotate to a
new journal file as the hash table gets to full, so that we can start
with a new fresh empty hash table.
|
|
we now can take multiple matches, and they will apply as AND if they
apply to different fields and OR if they apply to the same fields. Also,
terms of this kind can be combined with an overreaching OR.
|
|
This helps explaining when the log output of "systemctl status" is
incomplete because the logs got rotated since the service was started.
|
|
We finally got the OK from all contributors with non-trivial commits to
relicense systemd from GPL2+ to LGPL2.1+.
Some udev bits continue to be GPL2+ for now, but we are looking into
relicensing them too, to allow free copy/paste of all code within
systemd.
The bits that used to be MIT continue to be MIT.
The big benefit of the relicensing is that closed source code may now
link against libsystemd-login.so and friends.
|
|
le16/32/64_t type should be used when storing little-endian value
header to integrate with sparse from Josh Triplett <josh@joshtriplett.org>
|
