| Age | Commit message (Collapse) | Author |
|---|
|
-q suppresses info messages too
|
|
Fix journalctl --dump-catalog, journalctl --list-catalog
|
|
Fixes #1514.
|
|
`journalctl --dump-catalog ID1 ID2 ...` works fine.
|
|
|
|
Implement a maximum limit on number of journal files to keep around.
Enforcing a limit is useful on this since our performance when viewing
pays a heavy penalty for each journal file to interleve. This setting is
turned on now by default, and set to 100.
Also, actully implement what 348ced909724a1331b85d57aede80a102a00e428
promised: use whatever we find on disk at startup as lower bound on how
much disk space we can use. That commit introduced some provisions to
implement this, but actually never did.
This also adds "journalctl --vacuum-files=" to vacuum files on disk by
their number explicitly.
|
|
logging fixes and more
|
|
Let's clean up our tree a bit, and reduce invocations of the
thread-unsafe strerror() by replacing it with printf()'s %m specifier.
|
|
shortcut for `systemctl kill --kill-who main --signal SIGUSR2 systemd-journald`
|
|
In sd-bus, the sd_bus_open_xyz() family of calls allocates a new bus,
while sd_bus_default_xyz() family tries to reuse the thread's default
bus. bus_open_transport() sometimes internally uses the former,
sometimes the latter family, but suggests it only calls the former via
its name. Hence, let's avoid this confusion, and generically rename the
call to bus_connect_transport().
Similar for all related calls.
And while we are at it, also change cgls + cgtop to do direct systemd
connections where possible, since all they do is talk to systemd itself.
|
|
This also allows us to drop build.h from a ton of files, hence do so.
Since we touched the #includes of those files, let's order them properly
according to CODING_STYLE.
|
|
Let's underline the header line of the table shown by cgtop, how it is
customary for tables. In order to do this, let's introduce new ANSI
underline macros, and clean up the existing ones as side effect.
|
|
off_t is a really weird type as it is usually 64bit these days (at least
in sane programs), but could theoretically be 32bit. We don't support
off_t as 32bit builds though, but still constantly deal with safely
converting from off_t to other types and back for no point.
Hence, never use the type anymore. Always use uint64_t instead. This has
various benefits, including that we can expose these values directly as
D-Bus properties, and also that the values parse the same in all cases.
|
|
The previous coccinelle semantic patch that improved usage of
log_error_errno()'s return value, only looked for log_error_errno()
invocations with a single parameter after the error parameter. Update
the patch to handle arbitrary numbers of additional arguments.
|
|
Turns this:
r = -errno;
log_error_errno(errno, "foo");
into this:
r = log_error_errno(errno, "foo");
and this:
r = log_error_errno(errno, "foo");
return r;
into this:
return log_error_errno(errno, "foo");
|
|
Previously the following command:
$ journalctl -f -t unmatchedtag12345
... would block when called with criteria that did not match any
journal lines. Once log lines appeared that matched the criteria
they were displayed.
Commit 02ab86c732576a71179ce12e97d44c289833236d broke this
behavior and the journal was not followed, but the command
exits with '-- No entries --' displayed.
This commit fixes the issue.
More information downstream:
https://bugzilla.redhat.com/show_bug.cgi?id=1253649
|
|
Manual merge of https://github.com/systemd/systemd/pull/751.
|
|
All users are now setting lowercase=false.
|
|
Pretty trivial helper which wraps free() but returns NULL, so we can
simplify this:
free(foobar);
foobar = NULL;
to this:
foobar = mfree(foobar);
|
|
When we encounter a journal file with exactly zero entries, print a nice
message and exit, and don't print a weird error message.
|
|
sd_bus_flush_close_unref() is a call that simply combines sd_bus_flush()
(which writes all unwritten messages out) + sd_bus_close() (which
terminates the connection, releasing all unread messages) +
sd_bus_unref() (which frees the connection).
The combination of this call is used pretty frequently in systemd tools
right before exiting, and should also be relevant for most external
clients, and is hence useful to cover in a call of its own.
Previously the combination of the three calls was already done in the
_cleanup_bus_close_unref_ macro, but this was only available internally.
Also see #327
|
|
Instead of use LIST_FOREACH_SAFE, just use the same, seperate destructor
everywhere.
|
|
All functions should either log the errors they run into, or only return
them in which case the caller should log them.
Make sure this rule is followed, so that each error is logged precisely
once, and neither never, nor more than once.
|
|
So far we tried to reserve the _t suffix to types we use like a value in
contrast to types we use as objects, hence let's do this in journalctl
too.
|
|
|
|
let's try to be valgrind clean
|
|
That way we can be sure we execute the destructors properly, and can be
valgrind-clean.
|
|
This method should greatly improve offset based lookup, by simply jumping
from one boot to the next boot. It starts at the journal head to get the
a boot ID, makes a _BOOT_ID match and then comes from the opposite
journal direction (tail) to get to the end that boot. After flushing the matches
and advancing the journal from that exact position, we arrive at the start
of next boot. Rinse and repeat.
This is faster than the old method of aggregating the full boot listing just
so we can jump to a specific boot, which can be a real pain on big journals
just for a mere "-b -1" case.
As an additional benefit --list-boots should improve slightly too, because
it does less seeking.
Note that there can be a change in boot order with this lookup method
because it will use the order of boots in the journal, not the realtime stamp
stored in them. That's arguably better, though.
Another deficiency is that it will get confused with boots interleaving in the
journal, therefore, it will refuse operation in --merge, --file and --directory mode.
https://bugs.freedesktop.org/show_bug.cgi?id=72601
|
|
|
|
A variety of changes:
- Make sure all our calls distuingish OOM from other errors if OOM is
not the only error possible.
- Be much stricter when parsing escaped paths, do not accept trailing or
leading escaped slashes.
- Change unit validation to take a bit mask for allowing plain names,
instance names or template names or an combination thereof.
- Refuse manipulating invalid unit name
|
|
- fix some memory leaks on error conditions
- handle all error cases properly, and log about failures
- move HAVE_ACL and no-HAVE_ACL code closer to each other
|
|
|
|
|
|
like:
src/shared/install.c: In function ‘unit_file_lookup_state’:
src/shared/install.c:1861:16: warning: ‘r’ may be used uninitialized in
this function [-Wmaybe-uninitialized]
return r < 0 ? r : state;
^
src/shared/install.c:1796:13: note: ‘r’ was declared here
int r;
^
|
|
Replace ENOTSUP by EOPNOTSUPP as this is what linux actually uses.
|
|
Usually when using loop_read(), we want to read the full buffer.
Add a helper that mirrors loop_write(), and returns 0 when full buffer
was read, and an error otherwise.
Use -ENODATA for the short read, to distinguish it from a read error.
|
|
It is more elegant to do this in one step.
Coverity complains about the TOCTOU difference, but it is not an
actual problem (CID #1237777).
|
|
|
|
This patch removes includes that are not used. The removals were found with
include-what-you-use which checks if any of the symbols from a header is
in use.
|
|
After all it is now much more like strjoin() than strappend(). At the
same time, add support for NULL sentinels, even if they are normally not
necessary.
|
|
|
|
Terminals tend to be 80 columns wide by default, and the help
text is only supposed to be a terse reminder anyway.
https://bugzilla.redhat.com/show_bug.cgi?id=1183771
|
|
When there are a lot of split out journal files, we might run out of fds
quicker then we want. Hence: bump RLIMIT_NOFILE to 16K if possible.
Do these even for journalctl. On Fedora the soft RLIMIT_NOFILE is at 1K,
the hard at 4K by default for normal user processes, this code hence
bumps this up for users to 4K.
https://bugzilla.redhat.com/show_bug.cgi?id=1179980
|
|
btrfs' COW logic results in heavily fragment journal files, which is
detrimental for perfomance. Hence, turn off COW for journal files as we
create them.
Turning off COW comes at the cost of data integrity guarantees, but this
should be acceptable, given that we do our own checksumming, and
generally have a pretty conservative write pattern.
Also see discussion on linux-btrfs:
http://www.spinics.net/lists/linux-btrfs/msg41001.html
|
|
LOG_DEBUG is already a log level, there is no need to use LOG_PRI which
is for filtering out the facility.
|
|
This makes them robust regarding truncation. Ideally, we'd export this
as an API, but given how messy SIGBUS handling is, and the uncertain
ownership logic of signal handlers we should not do this (unless libc
one day invents a scheme how to sanely install SIGBUS handlers for
specific memory areas only). However, for now we can still make all our
own tools robust.
Note that external tools will only have read-access to the journal
anyway, where SIGBUS is much more unlikely, given that only writes are
subject to disk full problems.
|
|
https://github.com/vlajos/misspell_fixer
https://github.com/torstehu/systemd/commit/b6fdeb618cf2f3ce1645b3315f15f482710c7ffa
Thanks to Torstein Husebo <torstein@huseboe.net>.
|
|
loop_write() didn't follow the usual systemd rules and returned status
partially in errno and required extensive checks from callers. Some of
the callers dealt with this properly, but many did not, treating
partial writes as successful. Simplify things by conforming to usual rules.
|
|
In the case where no entries have been added to the journal after the specified
cursor, set need_seek before the main loop to prevent display of the entry at
said cursor.
|
|
Using the same scripts as in f647962d64e "treewide: yet more log_*_errno
+ return simplifications".
|
