| Age | Commit message (Collapse) | Author |
|---|
|
This makes them robust regarding truncation. Ideally, we'd export this
as an API, but given how messy SIGBUS handling is, and the uncertain
ownership logic of signal handlers we should not do this (unless libc
one day invents a scheme how to sanely install SIGBUS handlers for
specific memory areas only). However, for now we can still make all our
own tools robust.
Note that external tools will only have read-access to the journal
anyway, where SIGBUS is much more unlikely, given that only writes are
subject to disk full problems.
|
|
https://github.com/vlajos/misspell_fixer
https://github.com/torstehu/systemd/commit/b6fdeb618cf2f3ce1645b3315f15f482710c7ffa
Thanks to Torstein Husebo <torstein@huseboe.net>.
|
|
loop_write() didn't follow the usual systemd rules and returned status
partially in errno and required extensive checks from callers. Some of
the callers dealt with this properly, but many did not, treating
partial writes as successful. Simplify things by conforming to usual rules.
|
|
In the case where no entries have been added to the journal after the specified
cursor, set need_seek before the main loop to prevent display of the entry at
said cursor.
|
|
Using the same scripts as in f647962d64e "treewide: yet more log_*_errno
+ return simplifications".
|
|
If the format string contains %m, clearly errno must have a meaningful
value, so we might as well use log_*_errno to have ERRNO= logged.
Using:
find . -name '*.[ch]' | xargs sed -r -i -e \
's/log_(debug|info|notice|warning|error|emergency)\((".*%m.*")/log_\1_errno(errno, \2/'
Plus some whitespace, linewrap, and indent adjustments.
|
|
|
|
Basically:
find . -name '*.[ch]' | while read f; do perl -i.mmm -e \
'local $/;
local $_=<>;
s/log_(debug|info|notice|warning|error|emergency)\("([^"]*)%s"([^;]*),\s*strerror\(-?([->a-zA-Z_]+)\)\);/log_\1_errno(\4, "\2%m"\3);/gms;print;' \
$f; done
Plus manual indentation fixups.
|
|
|
|
It corrrectly handles both positive and negative errno values.
|
|
As a followup to 086891e5c1 "log: add an "error" parameter to all
low-level logging calls and intrdouce log_error_errno() as log calls
that take error numbers", use sed to convert the simple cases to use
the new macros:
find . -name '*.[ch]' | xargs sed -r -i -e \
's/log_(debug|info|notice|warning|error|emergency)\("(.*)%s"(.*), strerror\(-([a-zA-Z_]+)\)\);/log_\1_errno(-\4, "\2%m"\3);/'
Multi-line log_*() invocations are not covered.
And we also should add log_unit_*_errno().
|
|
When I tryed to run journalctl with --follow and --since arguments it
behaved very strangely.
First It prints logs from what I specified in --since argument, then
printed 10 lines (as is default in --follow) and when app put something
new in to log journalctl printed everithing from the last printed line.
How to reproduce:
1. run: journalctl -m --since 14:00 --follow
Then you'll see 10 lines of logs since 14:00. After that wait until some
app add something in the journal or just run `systemd-cat echo test`
2. After that journalctl will print every single line since 14:00 and will
follow as expected.
As long as --since and --follow will eventually print all relevant
lines, I seen no reason why not to print them right away and not after
first new message in journal.
Relevant bugzillas:
https://bugs.freedesktop.org/show_bug.cgi?id=71546
https://bugs.freedesktop.org/show_bug.cgi?id=64291
|
|
journal files based on a size/time limit
This is equivalent to the effect of SystemMaxUse= and RetentionSec=,
however can be invoked directly instead of implicitly.
|
|
http://bugs.debian.org/766598
|
|
|
|
Anything that uses hashmap_next() almost certainly cares about the order
and needs to be an OrderedHashmap.
|
|
systemd-journal-flush.service
This new command will ask the journal daemon to flush all log data
stored in /run to /var, and wait for it to complete. This is useful, so
that in case of Storage=persistent we can order systemd-tmpfiles-setup
afterwards, to ensure any possibly newly created directory in /var/log
gets proper access mode and owners.
|
|
names
|
|
|
|
As of 0f99f74a14 'sd-journal: verify that object start with the field
name' this condition should never happen.
|
|
Also, let's try to make function names descriptive, instead of using
bools for flags.
|
|
The --utc option was introduced by commit
9fd290443f5f99fca0dcd4216b1de70f7d3b8db1.
Howerver, the implementation was incomplete.
|
|
Introduce option to display time in UTC.
|
|
They are not legal in the export format.
|
|
It is redundant to store 'hash' and 'compare' function pointers in
struct Hashmap separately. The functions always comprise a pair.
Store a single pointer to struct hash_ops instead.
systemd keeps hundreds of hashmaps, so this saves a little bit of
memory.
|
|
|
|
This turns journalctl to the counterpart of systemd-cat.
Messages sent with
systemd-cat --identifier foo --prioritiy debug
can now be shown with
journalctl --identifier foo --prioritiy debug
"--identifier" is not merged with "--unit" to make a clear
distinction between syslog and systemd units.
syslog identifiers can be chosen freely by anyone.
|
|
getopt is usually good at printing out a nice error message when
commandline options are invalid. It distinguishes between an unknown
option and a known option with a missing arg. It is better to let it
do its job and not use opterr=0 unless we actually want to suppress
messages. So remove opterr=0 in the few places where it wasn't really
useful.
When an error in options is encountered, we should not print a lengthy
help() and overwhelm the user, when we know precisely what is wrong
with the commandline. In addition, since help() prints to stdout, it
should not be used except when requested with -h or --help.
Also, simplify things here and there.
|
|
In practice this shouldn't make much difference, but
sometimes our headers might be newer, and we want to
test them.
|
|
|
|
There is a small number of the places in sources where we don't check
asprintf() return code and assume that after error the function
returns NULL pointer via the first argument. That's wrong, after
error the content of pointer is undefined.
|
|
https://bugzilla.redhat.com/show_bug.cgi?id=1110712
|
|
|
|
|
|
safe_close() automatically becomes a NOP when a negative fd is passed,
and returns -1 unconditionally. This makes it easy to write lines like
this:
fd = safe_close(fd);
Which will close an fd if it is open, and reset the fd variable
correctly.
By making use of this new scheme we can drop a > 200 lines of code that
was required to test for non-negative fds or to reset the closed fd
variable afterwards.
|
|
Positional arguments only make sense with the default action.
For other actions, complain instead of ignoring them silently.
|
|
If -flto is used then gcc will generate a lot more warnings than before,
among them a number of use-without-initialization warnings. Most of them
without are false positives, but let's make them go away, because it
doesn't really matter.
|
|
Resolve spotted issues related to missing or extraneous commas, dashes.
|
|
Let's unify our code here, and also always specifiy O_CLOEXEC.
|
|
This is a continuation of e3e0314b systemctl: allow globbing in commands
which take multiple unit names.
Multiple patterns can be specified, as separate arguments, or as one argument
with patterns seperated by commas.
If patterns are given, at least one unit must be matched (by any of the patterns).
This is different behaviour than systemctl, but here it is necessary because
otherwise anything would be matched, which is unlikely to be the intended
behaviour.
https://bugs.freedesktop.org/show_bug.cgi?id=59336
|
|
Suggested-by: Russ Allbery <rra@debian.org>
|
|
|
|
|
|
This reverts commit cf5bccc2bb9569030cb04debbc4208aaca0fe5b4.
We should fix thinks properly if they aren't perfect, not just break
other things...
|
|
This flag shouldn't try and consume the following argument. It should
behave like every other flag which takes an optional argument when
parsed by getopt_long.
|
|
-- fix grammar and reword some descriptions for clarity
-- add a useful description of what --follow does
-- fix the description for --after-cursor
-- properly introduce the FSS acronym for "Forward Secure Sealing" in
both sections
-- clarify the --disk-usage command
[zj: perform similar changes to zsh completions]
squash! journalctl: fix several issues in --help message text
|
|
journalctl help output might run off the screen, so be consistent
as other systemd tools do and pipe it into a pager.
|
|
This adds the new library call sd_journal_open_container() and a new
"-M" switch to journalctl. Particular care is taken that journalctl's
"-b" switch resolves to the current boot ID of the container, not the
host.
|
|
The only problem is that libgen.h #defines basename to point to it's
own broken implementation instead of the GNU one. This can be fixed
by #undefining basename.
|
|
|
