| Age | Commit message (Collapse) | Author |
|---|
|
|
|
|
|
|
|
- Move to its own file rm-rf.c
- Change parameters into a single flags parameter
- Remove "honour sticky" logic, it's unused these days
|
|
This patch removes includes that are not used. The removals were found with
include-what-you-use which checks if any of the symbols from a header is
in use.
|
|
After all it is now much more like strjoin() than strappend(). At the
same time, add support for NULL sentinels, even if they are normally not
necessary.
|
|
If we scale our buffer to be wide enough for the format string, we
should expect that the calculation was correct.
char_array_0() invocations are removed, since snprintf nul-terminates
the output in any case.
A similar wrapper is used for strftime calls, but only in timedatectl.c.
|
|
|
|
This undoes a small part of 13790add4bf648fed816361794d8277a75253410
which was erroneously added, given that zero length datagrams are OK,
and hence zero length reads on a SOCK_DGRAM be no means mean EOF.
|
|
Making use of the fd storage capability of the previous commit, allow
restarting journald by serilizing stream state to /run, and pushing open
fds to PID 1.
|
|
|
|
deleted, rotate
https://bugzilla.redhat.com/show_bug.cgi?id=1171719
|
|
|
|
|
|
Even though we use fallocate() it appears that file systems like btrfs
will trigger SIGBUS on certain low-disk-space situation. We should
handle that, hence catch the signal, add it to a list of invalidated
pages, and replace the page with an empty memory area. After each write
check if SIGBUS was triggered, and consider the write invalid if it was.
This should make journald a lot more robust with file systems where
fallocate() is not reliable, for example all CoW file systems
(btrfs...), where changing written data can fail with disk full errors.
https://bugzilla.redhat.com/show_bug.cgi?id=1045810
|
|
|
|
This is mostly likely the audit socket, and we really should close it
if we cannot make sense of it, since as long as it is open the kernel
might disable the kmsg forwarding of audit msgs, and we should avoid
that, since audit msgs might get completely lost then.
I also downgraded the log message we show a bit, after all things should
really work fine, and we proceed fine with it.
|
|
|
|
Using the same scripts as in f647962d64e "treewide: yet more log_*_errno
+ return simplifications".
|
|
If the format string contains %m, clearly errno must have a meaningful
value, so we might as well use log_*_errno to have ERRNO= logged.
Using:
find . -name '*.[ch]' | xargs sed -r -i -e \
's/log_(debug|info|notice|warning|error|emergency)\((".*%m.*")/log_\1_errno(errno, \2/'
Plus some whitespace, linewrap, and indent adjustments.
|
|
|
|
Basically:
find . -name '*.[ch]' | while read f; do perl -i.mmm -e \
'local $/;
local $_=<>;
s/log_(debug|info|notice|warning|error|emergency)\("([^"]*)%s"([^;]*),\s*strerror\(-?([->a-zA-Z_]+)\)\);/log_\1_errno(\4, "\2%m"\3);/gms;print;' \
$f; done
Plus manual indentation fixups.
|
|
It corrrectly handles both positive and negative errno values.
|
|
As a followup to 086891e5c1 "log: add an "error" parameter to all
low-level logging calls and intrdouce log_error_errno() as log calls
that take error numbers", use sed to convert the simple cases to use
the new macros:
find . -name '*.[ch]' | xargs sed -r -i -e \
's/log_(debug|info|notice|warning|error|emergency)\("(.*)%s"(.*), strerror\(-([a-zA-Z_]+)\)\);/log_\1_errno(-\4, "\2%m"\3);/'
Multi-line log_*() invocations are not covered.
And we also should add log_unit_*_errno().
|
|
Also, while we are at it, introduce some syntactic sugar for creating
ERRNO= and MESSAGE= structured logging fields.
|
|
systemd-journald would refuse to start if it received an unknown
socket from systemd. This is annoying, because the failure more for
systemd-journald is unpleasant: systemd will keep restarting journald,
but most likely the same error will occur every time. It is better
to continue. journald will try to open missing sockets on its own,
so things should mostly work.
One question is whether to close the sockets which cannot be parsed or
to keep them open. Either way we might lose some messages. This
failure is most likely for the audit socket (selinux issues), which
can be opened multiple times so this not a problem, so I decided to
keep them open because it makes it easier to debug the issue after the
system is fully started.
|
|
Also, make all parsing of the kernel cmdline non-fatal.
|
|
have anyway
|
|
journal files based on a size/time limit
This is equivalent to the effect of SystemMaxUse= and RetentionSec=,
however can be invoked directly instead of implicitly.
|
|
|
|
|
|
|
|
Commit 74055aa762 'journalctl: add new --flush command and make use of
it in systemd-journal-flush.service' broke flushing because journald
checks for the /run/systemd/journal/flushed file before opening the
permanent journal. When the creation of this file was postponed,
flushing stoppage ensued.
|
|
Order matters here. It replaces oldest entries first when
USER_JOURNALS_MAX is reached.
|
|
new mac_{smack,selinux,apparmor}_xyz() convention
|
|
systemd-journal-flush.service
This new command will ask the journal daemon to flush all log data
stored in /run to /var, and wait for it to complete. This is useful, so
that in case of Storage=persistent we can order systemd-tmpfiles-setup
afterwards, to ensure any possibly newly created directory in /var/log
gets proper access mode and owners.
|
|
runtime journal is migrated to system journal when only
"/run/systemd/journal/flushed" exist. It's ok but according to this
the system journal directory size(max use) can be over the config. If
journal is not rotated during some time the journal directory can be
remained as over the config(or default) size. To avoid, do
server_vacuum just after the system journal migration from runtime.
|
|
|
|
It is redundant to store 'hash' and 'compare' function pointers in
struct Hashmap separately. The functions always comprise a pair.
Store a single pointer to struct hash_ops instead.
systemd keeps hundreds of hashmaps, so this saves a little bit of
memory.
|
|
$ systemd-analyze verify trailing-g.service
[./trailing-g.service:2] Trailing garbage, ignoring.
trailing-g.service lacks ExecStart setting. Refusing.
Error: org.freedesktop.systemd1.LoadFailed: Unit trailing-g.service failed to load: Invalid argument.
Failed to create trailing-g.service/start: Invalid argument
|
|
String which ended in an unfinished quote were accepted, potentially
with bad memory accesses.
Reject anything which ends in a unfished quote, or contains
non-whitespace characters right after the closing quote.
_FOREACH_WORD now returns the invalid character in *state. But this return
value is not checked anywhere yet.
Also, make 'word' and 'state' variables const pointers, and rename 'w'
to 'word' in various places. Things are easier to read if the same name
is used consistently.
mbiebl_> am I correct that something like this doesn't work
mbiebl_> ExecStart=/usr/bin/encfs --extpass='/bin/systemd-ask-passwd "Unlock EncFS"'
mbiebl_> systemd seems to strip of the quotes
mbiebl_> systemctl status shows
mbiebl_> ExecStart=/usr/bin/encfs --extpass='/bin/systemd-ask-password Unlock EncFS $RootDir $MountPoint
mbiebl_> which is pretty weird
|
|
Special care is needed so that we get an error message if the
file failed to parse, but not when it is missing. To avoid duplicating
the same error check in every caller, add an additional 'warn' boolean
to tell config_parse whether a message should be issued.
This makes things both shorter and more robust wrt. to error reporting.
|
|
|
|
After all, rsyslog and friends nowadays read their data directly from
the journal, hence the forwarding is unnecessary in most cases.
|
|
journald.conf(5) states that the default for MaxFileSec is one month,
but the code didn't respect that.
|
|
Now that we actually can distuingish system and normal users there's no
point in taking session information into account anymore when splitting
up logs.
This has the beenfit with that coredump information will actually end up
in each user's own journal.
|
|
Introduce a new configuration file /etc/systemd/coredump.conf to
configure when to place coredumps in the journal and when on disk.
Since the coredumps are quite large, default to storing them only on
disk.
|
|
|
|
This way we can make the socket also available for sandboxed apps that
have their own private /dev. They can now simply symlink the socket from
/dev.
|
|
We shouldn't destroy IPC objects of system users on logout.
http://lists.freedesktop.org/archives/systemd-devel/2014-April/018373.html
This introduces SYSTEM_UID_MAX defined to the maximum UID of system
users. This value is determined compile-time, either as configure switch
or from /etc/login.defs. (We don't read that file at runtime, since this
is really a choice for a system builder, not the end user.)
While we are at it we then also update journald to use SYSTEM_UID_MAX
when we decide whether to split out log data for a specific client.
|
