| Age | Commit message (Collapse) | Author |
|---|
|
|
|
|
|
After all it is now much more like strjoin() than strappend(). At the
same time, add support for NULL sentinels, even if they are normally not
necessary.
|
|
If we scale our buffer to be wide enough for the format string, we
should expect that the calculation was correct.
char_array_0() invocations are removed, since snprintf nul-terminates
the output in any case.
A similar wrapper is used for strftime calls, but only in timedatectl.c.
|
|
client to it
The old "systemd-import" binary is now an internal tool. We still use it
as asynchronous backend for systemd-importd. Since the import tool might
require some IO and CPU resources (due to qcow2 explosion, and
decompression), and because we might want to run it with more minimal
priviliges we still keep it around as the worker binary to execute as
child process of importd.
machinectl now has verbs for pulling down images, cancelling them and
listing them.
|
|
In case CAP_SYS_ADMIN is missing (like in containers), one cannot fake pid in
struct ucred (uid/gid are fine if CAP_SETUID/CAP_SETGID are present).
Ensure that journald will try again to forward the messages to syslog without
faking the SCM_CREDENTIALS pid (which isn't guaranteed to succeed anyway, since
it also does the same thing if the process has already exited).
With this patch, journald will no longer silently discard messages
that are supposed to be sent to syslog in these situations.
https://bugs.debian.org/775067
|
|
|
|
Using the same scripts as in f647962d64e "treewide: yet more log_*_errno
+ return simplifications".
|
|
If the format string contains %m, clearly errno must have a meaningful
value, so we might as well use log_*_errno to have ERRNO= logged.
Using:
find . -name '*.[ch]' | xargs sed -r -i -e \
's/log_(debug|info|notice|warning|error|emergency)\((".*%m.*")/log_\1_errno(errno, \2/'
Plus some whitespace, linewrap, and indent adjustments.
|
|
|
|
It corrrectly handles both positive and negative errno values.
|
|
As a followup to 086891e5c1 "log: add an "error" parameter to all
low-level logging calls and intrdouce log_error_errno() as log calls
that take error numbers", use sed to convert the simple cases to use
the new macros:
find . -name '*.[ch]' | xargs sed -r -i -e \
's/log_(debug|info|notice|warning|error|emergency)\("(.*)%s"(.*), strerror\(-([a-zA-Z_]+)\)\);/log_\1_errno(-\4, "\2%m"\3);/'
Multi-line log_*() invocations are not covered.
And we also should add log_unit_*_errno().
|
|
|
|
|
|
new mac_{smack,selinux,apparmor}_xyz() convention
|
|
Also be more verbose in devnode_acl_all().
|
|
After all, rsyslog and friends nowadays read their data directly from
the journal, hence the forwarding is unnecessary in most cases.
|
|
This way we can make the socket also available for sandboxed apps that
have their own private /dev. They can now simply symlink the socket from
/dev.
|
|
No functional change expected :)
|
|
GCC optimizes strlen("string constant") to a constant, even with -O0.
Thus, replace patterns like sizeof("string constant")-1 with
strlen("string constant") where possible, for clarity. In particular,
for expressions intended to add up the lengths of components going into
a string, this often makes it clearer that the expression counts the
trailing '\0' exactly once, by putting the +1 for the '\0' at the end of
the expression, rather than hidden in a sizeof in the middle of the
expression.
|
|
This will let journald forward logs as messages sent to all logged in
users (like wall).
Two options are added:
* ForwardToWall (default yes)
* MaxLevelWall (default emerg)
'ForwardToWall' is overridable by kernel command line option
'systemd.journald.forward_to_wall'.
This is used to emulate the traditional syslogd behaviour of sending
emergency messages to all logged in users.
|
|
first (or second)
Previously the returned object of constructor functions where sometimes
returned as last, sometimes as first and sometimes as second parameter.
Let's clean this up a bit. Here are the new rules:
1. The object the new object is derived from is put first, if there is any
2. The object we are creating will be returned in the next arguments
3. This is followed by any additional arguments
Rationale:
For functions that operate on an object we always put that object first.
Constructors should probably not be too different in this regard. Also,
if the additional parameters might want to use varargs which suggests to
put them last.
Note that this new scheme only applies to constructor functions, not to
all other functions. We do give a lot of freedom for those.
Note that this commit only changes the order of the new functions we
added, for old ones we accept the wrong order and leave it like that.
|
|
|
|
|
|
Always cache the results, and bypass low-level security calls when the
respective subsystem is not enabled.
|
|
In 49998b383 (journald: do not overwrite syslog facility when
parsing priority) journald started ignoring facility part when
reading service stderr to convert to syslog messages. In this
case it is fine, because only the priority is allowed.
But the same codepath is used for syslog messages, where the
facility should be used. Split the two codepaths by explicitly
specyfing whether the facility should be ignored or not.
https://bugzilla.redhat.com/show_bug.cgi?id=988814
|
|
When journald encounters a message with OBJECT_PID= set
coming from a priviledged process (UID==0), additional fields
will be added to the message:
OBJECT_UID=,
OBJECT_GID=,
OBJECT_COMM=,
OBJECT_EXE=,
OBJECT_CMDLINE=,
OBJECT_AUDIT_SESSION=,
OBJECT_AUDIT_LOGINUID=,
OBJECT_SYSTEMD_CGROUP=,
OBJECT_SYSTEMD_SESSION=,
OBJECT_SYSTEMD_OWNER_UID=,
OBJECT_SYSTEMD_UNIT= or OBJECT_SYSTEMD_USER_UNIT=.
This is for other logging daemons, like setroubleshoot, to be able to
augment their logs with data about the process.
https://bugzilla.redhat.com/show_bug.cgi?id=951627
|
|
https://bugs.freedesktop.org/show_bug.cgi?id=65610
|
|
Before, we would initialize many fields twice: first
by filling the structure with zeros, and then a second
time with the real values. We can let the compiler do
the job for us, avoiding one copy.
A downside of this patch is that text gets slightly
bigger. This is because all zero() calls are effectively
inlined:
$ size build/.libs/systemd
text data bss dec hex filename
before 897737 107300 2560 1007597 f5fed build/.libs/systemd
after 897873 107300 2560 1007733 f6075 build/.libs/systemd
… actually less than 1‰.
A few asserts that the parameter is not null had to be removed. I
don't think this changes much, because first, it is quite unlikely
for the assert to fail, and second, an immediate SEGV is almost as
good as an assert.
|
|
The point is to allow the use of journald functions by other binaries.
Before, journald code was split into multiple files (journald-*.[ch]),
but all those files all required functions from journald.c. And
journald.c has its own main(). Now, it is possible to link against
those functions, e.g. from test binaries.
This constitutes a fix for https://bugzilla.redhat.com/show_bug.cgi?id=872638.
The patch does the following:
1. rename journald.h to journald-server.h and move corresponding code
to journald-server.c.
2. add journald-server.c and other journald-*.c parts to
libsystemd-journal-internal.
3. remove journald-syslog.c from test_journal_syslog_SOURCES, since
it is now contained in libsystemd-journal-internal.
There are no code changes, apart from the removal of a few static's,
to allow function calls between files.
|
|
Valgrind says:
==29176== Conditional jump or move depends on uninitialised value(s)
==29176== at 0x412A85: cunescape_length_with_prefix (util.c:1565)
==29176== by 0x40B351: dev_kmsg_record (journald-kmsg.c:301)
==29176== by 0x40B653: server_read_dev_kmsg (journald-kmsg.c:347)
==29176== by 0x40B701: server_flush_dev_kmsg (journald-kmsg.c:365)
==29176== by 0x409DE7: main (journald.c:1535)
|
|
https://bugzilla.redhat.com/show_bug.cgi?id=847207
|
|
|
|
|
|
|
|
|
