summaryrefslogtreecommitdiff
path: root/src/journal/sd-journal.c
AgeCommit message (Collapse)Author
2013-11-08journal: fix minor memory leakLennart Poettering
2013-10-14list: make our list macros a bit easier to use by not requring type spec on ↵Lennart Poettering
each invocation We can determine the list entry type via the typeof() gcc construct, and so we should to make the macros much shorter to use.
2013-08-20Rename F_TYPE_CMP() to F_TYPE_EQUAL()Zbigniew Jędrzejewski-Szmek
2013-07-16journalctl,systemctl: fix tiny memleakZbigniew Jędrzejewski-Szmek
2013-07-16journal: return -ECHILD after a forkZbigniew Jędrzejewski-Szmek
A few asserts are replaced with 'return -EINVAL'. I think that assert should not be used to check argument in public functions. Fields in struct sd_journal are rearranged to make it less swiss-cheesy.
2013-06-10journal: change direction tests to use the same convention (cp </> np)Zbigniew Jędrzejewski-Szmek
The order was different in various places, which makes it harder to read to code. Also consistently use ternany for all direction checks. Remove one free(NULL).
2013-06-10journal: remember last direction of search and keep offset cacheZbigniew Jędrzejewski-Szmek
The fields in JournalFile are moved around to avoid wasting 7 bytes because of alignment.
2013-06-10journal: add sd_journal_open_filesZbigniew Jędrzejewski-Szmek
This allows the caller to explicitly specify which journal files should be opened. The same functionality could be achieved before by creating a directory and playing around with symlinks. It is useful to debug stuff and explore the journal, and has been requested before. Waiting is supported, the journal will notice modifications on the files supplied when opening the journal, but will not add any new files.
2013-06-10Use stdint.h macros instead of casts to print uint64_t valuesZbigniew Jędrzejewski-Szmek
Casts are visually heavy, and can obscure unwanted truncations.
2013-06-10journal: loop less in MATCH_AND_TERM conditionalsZbigniew Jędrzejewski-Szmek
AND term usually don't have many subterms (4 seems to be the maximum sensible number, e.g. _BOOT_ID && _SYSTEMD_UNIT && _PID && MESSAGE_ID). Nevertheless, the cost of checking each subterm can be relatively high, especially when the nested terms are compound, and it makes sense to minimize the number of checks. Instead of looping to the end and then again over the whole list once again after at least one term changed the offset, start the loop at the term which caused the change. This way ½ terms in the AND match are not checked unnecessarily again.
2013-06-10journal: add ability to filter by current userZbigniew Jędrzejewski-Szmek
This is the just the library part. SD_JOURNAL_CURRENT_USER flags is added to sd_j_open(), to open files from current user. SD_JOURNAL_SYSTEM_ONLY is renamed to SD_JOURNAL_SYSTEM, and changed to mean to (also) open system files. This way various flags can be combined, which gives them nicer semantics, especially if other ones are added later. Backwards compatibility is kept, because SD_JOURNAL_SYSTEM_ONLY is equivalent to SD_JOURNAL_SYSTEM if used alone, and before there we no other flags.
2013-06-10journal: simplify match_free_if_emptyZbigniew Jędrzejewski-Szmek
2013-06-04systemctl: limit logs in status to current bootZbigniew Jędrzejewski-Szmek
Also reworded a few debug messages for brevity, and added a log statement which prints out the filter at debug level: Journal filter: (((UNIT=sys-module-configfs.device AND _PID=1) OR (COREDUMP_UNIT=sys-module-configfs.device AND MESSAGE_ID=fc2e22bc6ee647b6b90729ab34a250b1) OR _SYSTEMD_UNIT=sys-module-configfs.device) AND _BOOT_ID=4e3c518ab0474c12ac8de7896fe6b154)
2013-05-14sd-journal: check if the pointers passed are the sameThomas Hindoe Paaboel Andersen
2013-05-08systemd-python: add __version__ stringsZbigniew Jędrzejewski-Szmek
2013-05-02Add __attribute__((const, pure, format)) in various placesZbigniew Jędrzejewski-Szmek
I'm assuming that it's fine if a _const_ or _pure_ function calls assert. It is assumed that the assert won't trigger, and even if it does, it can only trigger on the first call with a given set of parameters, and we don't care if the compiler moves the order of calls.
2013-04-19Reintroduce f_type comparison macroHarald Hoyer
This reverts commit 4826f0b7b5c0aefa08b8cc7ef64d69027f84da2c. Because statfs.t_type can be int on some architecures, we have to cast the const magic to the type, otherwise the compiler warns about signed/unsigned comparison, because the magic can be 32 bit unsigned. statfs(2) man page is also wrong on some systems, because f_type is not __SWORD_TYPE on some architecures. The following program: int main(int argc, char**argv) { struct statfs s; statfs(argv[1], &s); printf("sizeof(f_type) = %d\n", sizeof(s.f_type)); printf("sizeof(__SWORD_TYPE) = %d\n", sizeof(__SWORD_TYPE)); printf("sizeof(long) = %d\n", sizeof(long)); printf("sizeof(int) = %d\n", sizeof(int)); if (sizeof(s.f_type) == sizeof(int)) { printf("f_type = 0x%x\n", s.f_type); } else { printf("f_type = 0x%lx\n", s.f_type); } return 0; } executed on s390x gives for a btrfs: sizeof(f_type) = 4 sizeof(__SWORD_TYPE) = 8 sizeof(long) = 8 sizeof(int) = 4 f_type = 0x9123683e
2013-04-18journal: when iterating through a file we might lose messages when changing ↵Marius Vollmer
direction. https://bugs.freedesktop.org/show_bug.cgi?id=63672
2013-04-18Revert f_type fixupsHarald Hoyer
This reverts commit a858b64dddf79177e12ed30f5e8c47a1471c8bfe. This reverts commit aea275c43194b6ac519ef907b62c5c995050fde0. This reverts commit fc6e6d245ee3989c222a2a8cc82a33475f9922f3. This reverts commit c4073a27c555aeceac87a3b02a83141cde641a1e. This reverts commit cddf148028f525be8176e7f1cbbf4f862bd287f6. This reverts commit 8c68a70170b31f93c287f29fd06c6c17edaf19ad. The constants are now casted to __SWORD_TYPE, which should resolve the compiler warnings about signed vs unsigned. After talking to Kay, we concluded: This should be fixed in the kernel, not worked around in userspace tools. Architectures cannot use int and expect magic constants lager than INT_MAX to work correctly. The kernel header needs to be fixed. Even coreutils cannot handle it: #define RAMFS_MAGIC 0x858458f6 # stat -f -c%t / ffffffff858458f6 #define BTRFS_SUPER_MAGIC 0x9123683E # stat -f -c%t /mnt ffffffff9123683e Although I found the perfect working macro to fix the thing :) __extension__ ({ \ bool _ret = false; \ switch(f) { case c: _ret=true; }; \ ( _ret ); \ })
2013-04-18move _cleanup_ attribute in front of the typeHarald Hoyer
http://lists.freedesktop.org/archives/systemd-devel/2013-April/010510.html
2013-04-18rename CMP_F_TYPE to F_TYPE_CMPHarald Hoyer
2013-04-18Add ugly CMP_F_TYPE() macroHarald Hoyer
On some architectures (like s390x) the kernel has the type int for f_type, but long in userspace. Assigning the 32 bit magic constants from linux/magic.h to the 31 bit signed f_type in the kernel, causes f_type to be negative for some constants. glibc extends the int to long for those architecures in 64 bit mode, so the negative int becomes a negative long, which cannot be simply compared to the original magic constant, because the compiler would automatically cast the constant to long. To workaround this issue, we also compare to the (int)MAGIC value in a macro. Of course, we could do #ifdef with the architecure, but it has to be maintained, and the magic constants are 32 bit anyway. Someday, when the int is unsigned or long for all architectures, we can remove this macro again. Until then, keep it as simple as it can be.
2013-04-17fixup for cddf148028f52Harald Hoyer
Instead of making a type up, just use __SWORD_TYPE, after reading statfs(2). Too bad, this does not fix s390x because __SWORD_TYPE is (long int) and the kernel uses (int) to fill in the field!!!!!!
2013-04-17fixup 8c68a7017 and cast to (unsigned long)Harald Hoyer
2013-04-17fixed statfs.f_type signed vs unsigned comparisonsHarald Hoyer
statfs.f_type is signed but the filesystem magics are unsigned. Casting the magics to signed will not make the signed. Problem seen on big-endian 64bit s390x with __fsword_t 8 bytes. Casting statfs.f_type to unsigned on the other hand will get us what we need. https://bugzilla.redhat.com/show_bug.cgi?id=953217
2013-04-17journal: add one more level on top with ANDHarald Hoyer
When using "-p" and "-b" in combination with "-u", the output is not what you would expect. The reason is the sd_journal_add_disjunction() call in add_matches_for_unit() and add_matches_for_user_unit(), which adds two ORs without taking the other conditions to every OR. Adding another level on top with AND and sd_journal_add_conjunction() solves the problem. Output before: $ journalctl -o short-monotonic -ab -p 0 -u sshd.service -- Reboot -- [ 3.216305] lenovo systemd[1]: Starting OpenSSH server daemon... -- Reboot -- [ 3.168666] lenovo systemd[1]: Starting OpenSSH server daemon... [ 3.169639] lenovo systemd[1]: Started OpenSSH server daemon. [36285.635389] lenovo systemd[1]: Stopped OpenSSH server daemon. -- Reboot -- [ 10.838657] lenovo systemd[1]: Starting OpenSSH server daemon... [ 10.913698] lenovo systemd[1]: Started OpenSSH server daemon. [ 6881.035183] lenovo systemd[1]: Stopped OpenSSH server daemon. -- Reboot -- [ 6.636228] lenovo systemd[1]: Starting OpenSSH server daemon... [ 6.662573] lenovo systemd[1]: Started OpenSSH server daemon. [ 6.681148] lenovo sshd[397]: Server listening on 0.0.0.0 port 22. [ 6.681379] lenovo sshd[397]: Server listening on :: port 22. As we see, the output is from _every_ boot and priority 0 is not taken into account. Output after patch: $ journalctl -o short-monotonic -ab -p 0 -u sshd.service -- Logs begin at Sun 2013-02-24 20:54:44 CET, end at Tue 2013-03-19 14:58:21 CET. -- Increasing the priority: $ journalctl -o short-monotonic -ab -p 6 -u sshd.service -- Logs begin at Sun 2013-02-24 20:54:44 CET, end at Tue 2013-03-19 14:59:12 CET. -- [ 6.636228] lenovo systemd[1]: Starting OpenSSH server daemon... [ 6.662573] lenovo systemd[1]: Started OpenSSH server daemon. [ 6.681148] lenovo sshd[397]: Server listening on 0.0.0.0 port 22. [ 6.681379] lenovo sshd[397]: Server listening on :: port 22.
2013-04-08journal: Fix typoMarius Vollmer
This would break backwards skipping. https://bugs.freedesktop.org/show_bug.cgi?id=63250
2013-04-04journal: add sd_journal_get_timeout() call to public APILennart Poettering
Let's do the wake-up logic on NFS internally, making things simpler for users.
2013-04-04journal: add public API call sd_journal_get_events()Lennart Poettering
This function should be used when filling in "struct pollfd"'s .events field for watching the journal. It will always return POLLIN for now, but we should keep our options open to change this later on. This mimics libsystemd-bus' sd_bus_get_events() call with the same purpose.
2013-03-28catalog: open up catalog internalsZbigniew Jędrzejewski-Szmek
In order to write tests for the catalog functions, they are made non-static and start taking a 'database' parameter, which is the name of a file with the preprocessed catalog entries. This makes it possible to make test-catalog part of the normal test suite, since it now only operates on files in /tmp. Some more tests are added.
2013-03-23journal: don't access j->files after useLennart Poettering
https://bugs.freedesktop.org/show_bug.cgi?id=62605
2013-03-23journalctl: various fixes to the access check logicLennart Poettering
- Reword messages a bit - Correct check whether EACCES is in the set of errors - Don't complain if no journal files are found - allocate Set object for errors lazily since in the best case we don't need it at all. - don't consider it an error if /run/log/journal doesn't exist (because that's the usual case actually, if storage is enabled)
2013-03-22journalctl: be smarter about journal error checksZbigniew Jędrzejewski-Szmek
There are many ways in which we can get those checks wrong, so it is better to warn and then error out on a real access failure. The error messages are wrapped to <80 lines, because their primary use is to be displayed in the terminal, and it is easier to read them this way. Reading them in the journal can be a bit trickier, but this is a bug in logs-show.c.
2013-03-18sd-journal: do not require path to be absoluteZbigniew Jędrzejewski-Szmek
Seems natural to be able to specify relative directory, e.g. with journalctl -D. And even if, this should be checked in front-end code, not in the library.
2013-03-18journal: use _cleanup_Zbigniew Jędrzejewski-Szmek
One log_debug() moved to match order in other functions.
2013-03-18journal: use sd_journal_close on error in sd_journal_newZbigniew Jędrzejewski-Szmek
2013-03-07libsystemd-journal: return 0 on success in get_data()Zbigniew Jędrzejewski-Szmek
The man page says so. Right now 0 would be returned if the data was encrypted, 1 otherwise.
2013-02-26log-show: look at everything in /run/log/journalZbigniew Jędrzejewski-Szmek
Logs written by journald from the initramfs may be written to a directory with the name created from a random machine-id. Afterwards, when the root filesystem has been mounted and machine-id reinitalized, logs will be written to the directory with a name created from the proper machine-id. When logs are flushed to /var/log/journal, everything is copied to one output directory. When journalctl without '-m' is run after the logs have been flushed to /var/log/journal, all messages are shown. However, when run while logs are still in /run/log/journal, those stored under the random machine-id will not be shown. Make journalctl behave the same regardless whether persistent storage has been enabled or not, and slurp all files from /run/log/journal even without '-m'.
2013-02-22journal: sd_journal_get_cursor should return 0 on successZbigniew Jędrzejewski-Szmek
Documentation states that 0 is correct, and all other similar functions return 0 on success. Pointed-out-by: Steven Hiscocks <steven-systemd@hiscocks.me.uk>
2012-11-21journal: by default do not decompress dat objects larger than 64KLennart Poettering
This introduces a new data threshold setting for sd_journal objects which controls the maximum size of objects to decompress. This is relieves the library from having to decompress full data objects even if a client program is only interested in the initial part of them. This speeds up "systemd-coredumpctl" drastically when invoked without parameters.
2012-11-20journal: add sd_journal_get_catalog_for_message_id() as API to get catalog ↵Lennart Poettering
entry for any message ID without requiring an open journal file
2012-11-16journal, shared: fix warnings during compilation on 32 bitsZbigniew Jędrzejewski-Szmek
Some filesystem magics are too big to fit in 31 bits, and are wrapped to negative. f_type is an int on 32 bits, so it is signed, and we get a warning on comparison.
2012-11-15journal: implement message catalogLennart Poettering
The message catalog can be used to attach short help texts to log lines, keyed by their MESSAGE_ID= fields. This is useful to help the administrator understand the context and cause of a message, find possible solutions and find further related documentation. Since this is keyed off MESSAGE_ID= this will only work for native journal messages. The message catalog supports i18n, and is useful to augment english language system messages with explanations in the local language. This commit only includes short explanatory messages for a few example message IDs, we'll add more complete documentation for the relevant systemd messages later on.
2012-10-26journal: provide an API that allows client to figure out whether they need ↵Lennart Poettering
to recheck the journal manually for changes in regular intervals Network file systems generally do not offer inotify() that would work across the network. We hence cannot rely on inotify() exclusiely in those case. Provide an API to determine these cases, and suggest doing manual regular rechecks. Note that this is not complete yet, as we need to rescan journal dirs on network file systems explicitly to find new/removed files
2012-10-26journal: properly determine cutoff max dateLennart Poettering
2012-10-18journal: typo fixLennart Poettering
2012-10-18journal: validate field name in sd_journal_query_unique()Lennart Poettering
2012-10-18libsystemd-journal: export sd_journal_restart_uniqueZbigniew Jędrzejewski-Szmek
2012-10-18journal: add ability to list values a specified field can take in all ↵Lennart Poettering
entries of the journal The new 'unique' API allows listing all unique field values that a field specified by a field name can take in all entries of the journal. This allows answering queries such as "What units logged to the journal?", "What hosts have logged into the journal?", "Which boot IDs have logged into the journal?". Ultimately this allows implementation of tools similar to lastlog based on journal data. Note that listing these field values will not work for journal files created with older journald, as the field values are not indexed in older files.
2012-10-16journalctl: properly track rotated journals in follow modeLennart Poettering