summaryrefslogtreecommitdiff
path: root/src/journal
AgeCommit message (Collapse)Author
2013-04-17fixup for cddf148028f52Harald Hoyer
Instead of making a type up, just use __SWORD_TYPE, after reading statfs(2). Too bad, this does not fix s390x because __SWORD_TYPE is (long int) and the kernel uses (int) to fill in the field!!!!!!
2013-04-17fixup 8c68a7017 and cast to (unsigned long)Harald Hoyer
2013-04-17fixed statfs.f_type signed vs unsigned comparisonsHarald Hoyer
statfs.f_type is signed but the filesystem magics are unsigned. Casting the magics to signed will not make the signed. Problem seen on big-endian 64bit s390x with __fsword_t 8 bytes. Casting statfs.f_type to unsigned on the other hand will get us what we need. https://bugzilla.redhat.com/show_bug.cgi?id=953217
2013-04-17journalctl: specify "--unit=" and "--user-unit" multiple timesHarald Hoyer
Previously only one "--unit=" or "--user-unit" could be specified. With this patch, journalcrtl can show multiple units. $ journalctl -u systemd-udevd.service -u sshd.service -u crond.service -b -- Logs begin at Sa 2013-03-23 11:08:45 CET, end at Fr 2013-04-12 09:10:22 CEST. -- Apr 12 08:41:37 lenovo systemd[1]: Started udev Kernel Device Manager. Apr 12 08:41:37 lenovo systemd[1]: Stopped udev Kernel Device Manager. Apr 12 08:41:38 lenovo systemd[1]: Started udev Kernel Device Manager. Apr 12 08:41:38 lenovo crond[291]: (CRON) INFO (Syslog will be used instead of sendmail.) Apr 12 08:41:38 lenovo crond[291]: (CRON) INFO (running with inotify support) Apr 12 08:41:39 lenovo systemd[1]: Starting OpenSSH server daemon... Apr 12 08:41:39 lenovo systemd[1]: Started OpenSSH server daemon. Apr 12 08:41:39 lenovo sshd[355]: Server listening on 0.0.0.0 port 22. Apr 12 08:41:39 lenovo sshd[355]: Server listening on :: port 22. Apr 12 08:41:39 lenovo mtp-probe[373]: checking bus 1, device 8: "/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5.6/1-1.5.6.2/1-1.5.6.2.1"
2013-04-17journal: add one more level on top with ANDHarald Hoyer
When using "-p" and "-b" in combination with "-u", the output is not what you would expect. The reason is the sd_journal_add_disjunction() call in add_matches_for_unit() and add_matches_for_user_unit(), which adds two ORs without taking the other conditions to every OR. Adding another level on top with AND and sd_journal_add_conjunction() solves the problem. Output before: $ journalctl -o short-monotonic -ab -p 0 -u sshd.service -- Reboot -- [ 3.216305] lenovo systemd[1]: Starting OpenSSH server daemon... -- Reboot -- [ 3.168666] lenovo systemd[1]: Starting OpenSSH server daemon... [ 3.169639] lenovo systemd[1]: Started OpenSSH server daemon. [36285.635389] lenovo systemd[1]: Stopped OpenSSH server daemon. -- Reboot -- [ 10.838657] lenovo systemd[1]: Starting OpenSSH server daemon... [ 10.913698] lenovo systemd[1]: Started OpenSSH server daemon. [ 6881.035183] lenovo systemd[1]: Stopped OpenSSH server daemon. -- Reboot -- [ 6.636228] lenovo systemd[1]: Starting OpenSSH server daemon... [ 6.662573] lenovo systemd[1]: Started OpenSSH server daemon. [ 6.681148] lenovo sshd[397]: Server listening on 0.0.0.0 port 22. [ 6.681379] lenovo sshd[397]: Server listening on :: port 22. As we see, the output is from _every_ boot and priority 0 is not taken into account. Output after patch: $ journalctl -o short-monotonic -ab -p 0 -u sshd.service -- Logs begin at Sun 2013-02-24 20:54:44 CET, end at Tue 2013-03-19 14:58:21 CET. -- Increasing the priority: $ journalctl -o short-monotonic -ab -p 6 -u sshd.service -- Logs begin at Sun 2013-02-24 20:54:44 CET, end at Tue 2013-03-19 14:59:12 CET. -- [ 6.636228] lenovo systemd[1]: Starting OpenSSH server daemon... [ 6.662573] lenovo systemd[1]: Started OpenSSH server daemon. [ 6.681148] lenovo sshd[397]: Server listening on 0.0.0.0 port 22. [ 6.681379] lenovo sshd[397]: Server listening on :: port 22.
2013-04-17journalctl: show fields requested with --field in fullZbigniew Jędrzejewski-Szmek
I see little point in silently truncating fields when they are explictly requested. With this change e.g. journalctl -b MESSAGE_ID=9f26aa562cf440c2b16c773d0479b518 --field=BOOTCHART works as expected.
2013-04-17Report about syntax errors with metadataZbigniew Jędrzejewski-Szmek
The information about the unit for which files are being parsed is passed all the way down. This way messages land in the journal with proper UNIT=... or USER_UNIT=... attribution. 'systemctl status' and 'journalctl -u' not displaying those messages has been a source of confusion for users, since the journal entry for a misspelt setting was often logged quite a bit earlier than the failure to start a unit. Based-on-a-patch-by: Oleksii Shevchuk <alxchk@gmail.com>
2013-04-16journal: fix off-by-one error in native message iovec countingMichal Schmidt
Thanks to Cristian Ciupitu for a reproducer. https://bugzilla.redhat.com/show_bug.cgi?id=924359
2013-04-16macro: rework how we define cleanup macrosLennart Poettering
There's now a generic _cleanup_ macro with an argument. The macros for specific types are now defined using this macro, and in the header files where they belong. All cleanup handlers are now inline functions.
2013-04-16nspawn: introduce the new /machine/ tree in the cgroup tree and move ↵Lennart Poettering
containers there Containers will now carry a label (normally derived from the root directory name, but configurable by the user), and the container's root cgroup is /machine/<label>. This label is called "machine name", and can cover both containers and VMs (as soon as libvirt also makes use of /machine/). libsystemd-login can be used to query the machine name from a process. This patch also includes numerous clean-ups for the cgroup code.
2013-04-13Include <fcntl.h> instead of <sys/fcntl.h>Zbigniew Jędrzejewski-Szmek
<fcntl.h> is POSIX. On Linux, <sys/fcntl.h> simply includes <fcntl.h>, so there should be on difference. On Android likewise, except that there is some more stuff. QNX has only <fcntl.h>. https://bugs.freedesktop.org/show_bug.cgi?id=63423
2013-04-13fileio: in envfiles, do not skip lines following empty linesZbigniew Jędrzejewski-Szmek
https://bugs.freedesktop.org/show_bug.cgi?id=63477
2013-04-12journal: fix broken tags _SOURCE_REALTIME_TIMESTAMP and _MACHINE_IDMirco Tischler
2013-04-10journalctl: check return of strjoinLukas Nykryn
2013-04-08journald: bring max coredump size in sync with max entry sizeLennart Poettering
2013-04-08journald: no need to free audit varsLennart Poettering
2013-04-08journald: drop two more memory allocationsLennart Poettering
2013-04-08journald: get rid of one more memory allocationLennart Poettering
2013-04-08journald: Do not dynamically allocate _UID/_GID/_PID stringsHolger Hans Peter Freyther
Avoid the dynamic allocation for the _UID, _GID, and _PID strings. The maximum size of the string can be determined at compile time. The code has only been compile tested.
2013-04-08journald: Do not always record _AUDIT_SESSION and _AUDIT_LOGINUIDHolger Hans Peter Freyther
When systemd was compiled without audit support, do not collect the audit session and loginuid in the journal. This is saving a couple of syscalls and memory allocations per log message.
2013-04-08journal: Fix typoMarius Vollmer
This would break backwards skipping. https://bugs.freedesktop.org/show_bug.cgi?id=63250
2013-04-05Use initalization instead of explicit zeroingZbigniew Jędrzejewski-Szmek
Before, we would initialize many fields twice: first by filling the structure with zeros, and then a second time with the real values. We can let the compiler do the job for us, avoiding one copy. A downside of this patch is that text gets slightly bigger. This is because all zero() calls are effectively inlined: $ size build/.libs/systemd text data bss dec hex filename before 897737 107300 2560 1007597 f5fed build/.libs/systemd after 897873 107300 2560 1007733 f6075 build/.libs/systemd … actually less than 1‰. A few asserts that the parameter is not null had to be removed. I don't think this changes much, because first, it is quite unlikely for the assert to fail, and second, an immediate SEGV is almost as good as an assert.
2013-04-05test-catalog,core/load-dropin: remove unused variablesZbigniew Jędrzejewski-Szmek
2013-04-05journal: u64log2 can be expressed just as __builtin_clzll(n) ^ 63UCristian Rodríguez
2013-04-05bus: add convenience functions for constructing and sending method ↵Lennart Poettering
calls/signals in one call
2013-04-04journal: add sd_journal_get_timeout() call to public APILennart Poettering
Let's do the wake-up logic on NFS internally, making things simpler for users.
2013-04-04journal: add public API call sd_journal_get_events()Lennart Poettering
This function should be used when filling in "struct pollfd"'s .events field for watching the journal. It will always return POLLIN for now, but we should keep our options open to change this later on. This mimics libsystemd-bus' sd_bus_get_events() call with the same purpose.
2013-04-04util: make time formatting a bit smarterLennart Poettering
Instead of outputting "5h 55s 50ms 3us" we'll now output "5h 55.050003s". Also, while outputting the accuracy is configurable. Basically we now try use "dot notation" for all time values > 1min. For >= 1s we use 's' as unit, otherwise for >= 1ms we use 'ms' as unit, and finally 'us'. This should give reasonably values in most cases.
2013-04-03util: rename parse_usec() to parse_sec() sinds the default unit is secondsLennart Poettering
Internally we store all time values in usec_t, however parse_usec() actually was used mostly to parse values in seconds (unless explicit units were specified to define a different unit). Hence, be clear about this and name the function about what we pass into it, not what we get out of it.
2013-04-02util: add a bit of syntactic sugar for saving/restoring errnoLennart Poettering
2013-04-01Always use our own MAX/MIN definitionsCristian Rodríguez
code in src/shared/macro.h only defined MAX/MIN in case they were not defined previously. however the MAX/MIN macros implemented in glibc are not of the "safe" kind but defined as: define MIN(a,b) (((a)<(b))?(a):(b)) define MAX(a,b) (((a)>(b))?(a):(b)) Avoid nasty side effects by using our own versions instead. Also fix the warnings derived from this change. [zj: - modify MAX3 macro to fix warning about _a shadowing _a, - do bootchart/svg.c too, - remove unused MIN3.]
2013-03-31journalctl: reword error messageZbigniew Jędrzejewski-Szmek
Sentence seemed to suggest that all three conditions must be true.
2013-03-31journald: check return value of strappendZbigniew Jędrzejewski-Szmek
2013-03-31journal-gatewayd: query PID 1 for virtalizationLennart Poettering
Since journal-gatewayd is now running unprivileged, and detecting virtalization requires privileges, query PID1 via D-Bus for the used virtualization. This is also the first time we use libsystemd-bus for more than just testing. https://bugs.freedesktop.org/show_bug.cgi?id=62173
2013-03-29journalctl: fix --update-catalog with not --root argZbigniew Jędrzejewski-Szmek
grawity> `journalctl --update-catalog` from latest git prints: "Recursive mkdir .: Invalid argument" and "Failed to write : Invalid argument"
2013-03-28journalctl: support --root for message catalogsZbigniew Jędrzejewski-Szmek
2013-03-28catalog: open up catalog internalsZbigniew Jędrzejewski-Szmek
In order to write tests for the catalog functions, they are made non-static and start taking a 'database' parameter, which is the name of a file with the preprocessed catalog entries. This makes it possible to make test-catalog part of the normal test suite, since it now only operates on files in /tmp. Some more tests are added.
2013-03-28catalog: make sure strings are terminatedZbigniew Jędrzejewski-Szmek
Coverity complains: systemd-199/src/journal/catalog.c:126: buffer_size_warning: Calling strncpy with a maximum size argument of 32 bytes on destination array "i->language" of size 32 bytes might leave the destination string unterminated. ...and unfortunately it was right. The string was defined as a fixed-size string in some parts of the code, and used a null-terminated string in others (e.g. in log statements). There's no point in conserving one byte, so just define the max language tag length to 31 bytes, and use null terminated strings everywhere. Also, wrap some lines, zero-fill less bytes, use '\0' instead of just 0 to be more explicit that this is one byte.
2013-03-28coredump: do not free twicesystemd/v200Zbigniew Jędrzejewski-Szmek
2013-03-27catalog: fix error codes handling in catalog_list_itemsLukas Nykryn
Previously r was set to zero and so if(r<0) was never true.
2013-03-27log: fix error codes handling in catalog_list_itemsLukas Nykryn
It does not make sense to print error code from previous loop.
2013-03-25journal: Add sync timer to journal serverOleksii Shevchuk
Add option to force journal sync with fsync. Default timeout is 5min. Interval configured via SyncIntervalSec option at journal.conf. Synced journal files will be marked as OFFLINE. Manual sync can be performed via sending SIGUSR1.
2013-03-23journald: remove unconditional log_*() use in the main loopKay Sievers
Setting MaxRetentionSec= caused the kernel log to overflow and the journal daemon to enter an endless loop. Logging from the journald main loop gets directed to /dev/kmsg, which wakes up journald again. We skip the import of this message by checking for our own PID, but this still causes the main loop to never go to sleep again because we never stopped logging from there.
2013-03-23journal: don't access j->files after useLennart Poettering
https://bugs.freedesktop.org/show_bug.cgi?id=62605
2013-03-23journalctl: various fixes to the access check logicLennart Poettering
- Reword messages a bit - Correct check whether EACCES is in the set of errors - Don't complain if no journal files are found - allocate Set object for errors lazily since in the best case we don't need it at all. - don't consider it an error if /run/log/journal doesn't exist (because that's the usual case actually, if storage is enabled)
2013-03-22journalctl: be smarter about journal error checksZbigniew Jędrzejewski-Szmek
There are many ways in which we can get those checks wrong, so it is better to warn and then error out on a real access failure. The error messages are wrapped to <80 lines, because their primary use is to be displayed in the terminal, and it is easier to read them this way. Reading them in the journal can be a bit trickier, but this is a bug in logs-show.c.
2013-03-22build-sys: move acl searching code into libsystemd-aclZbigniew Jędrzejewski-Szmek
This loop over acls is a bit too much to keep inside of another loop.
2013-03-22journalctl: give a nice hint about group membership based on ACLs of ↵Lennart Poettering
/var/log/journal If we notice that we unprivileged and not in any of the groups which have access to /var/log/journal, print a nice message about which groups do. This checks and prints all groups that are in the default ACL for /var/log/journal, which is not necessarily correct for all journal files, but pretty close.
2013-03-21Fix vacuum logic errorJan Alexander Steffens (heftig)
The vacuum code used to stop vacuuming after one deletion, even when max_use was still exceeded. Also make usage a uint64_t, as the code already pretends it is one. Signed-off-by: Jan Alexander Steffens (heftig) <jan.steffens@gmail.com>
2013-03-20Remove some unused variablesZbigniew Jędrzejewski-Szmek
generated by cgit v1.2.3-54-g00ecf (git 2.45.2) at 2024-11-12 12:29:53 +0000