| Age | Commit message (Collapse) | Author |
|---|
|
Also add a coccinelle receipt to help with such transitions.
|
|
Fix miscalculated buffer size and uses of size-unlimited sprintf()
|
|
function.
Not sure if this results in an exploitable buffer overflow, probably not
since the the int value is likely sanitized somewhere earlier and it's
being put through a bit mask shortly before being used.
|
|
The stream event source has a priority of SD_EVENT_PRIORITY_NORMAL+5,
and stdout source +10, but the native and syslog event sources are left
at the default of 0.
As a result, any heavy native or syslog logger can cause starvation of
the other loggers. This is trivially demonstrated by running:
dd if=/dev/urandom bs=8k | od | systemd-cat & # native spammer
systemd-run echo hello & # stream logger
journalctl --follow --output=verbose --no-pager --identifier=echo &
... and wait, and wait, the "hello" never comes.
Now kill %1, "hello" arrives finally.
|
|
Journal decompression fixes
|
|
This was the case that caused various problems that were fixed in
preceding patches, so it is good to add a test that uses it directly.
In "may_fail" test cases try again with a bigger buffer.
Instead of allocating various buffers on the stack, malloc them.
This is more reliable in case of big buffers, and allows tools like
valgrind and address sanitizer to find overflows more easily.
|
|
Add a test that LZ4_decompress_safe_partial does (not) work as
expected, so that if it starts to work at some point, we'll catch
this and adjust our code.
|
|
The header is 7 bytes, and this size was not accounted for in
total_out. This means that we could create a file that was 7 bytes
longer than requested, and the debug output was also inconsistent.
|
|
compress_blob took src, src_size, dst and *dst_size, but dst_size
wasn't used as an input parameter with the size of dst, but only as an
output parameter. dst was implicitly assumed to be at least src_size-1.
This code wasn't *wrong*, because the only real caller in
journal-file.c got it right. But it was misleading, and the tests in
test-compress.c got it wrong, and worked only because the output
buffer happened to be the same size as input buffer. So add a seperate
dst_allocated_size parameter to make it explicit what the size of the
buffer is, and to allow test to proceed with different output buffer
sizes.
|
|
lz4 has to decompress a whole "sequence" at a time. When the compressed
data is composed of a repeating pattern, the whole set of repeats has
do be docompressed, and the output buffer has to be big enough.
This is unfortunate, because potentially the slowdown is very big. We
are only interested in the field name, but we might have to decompress
the whole thing. But the full cost will be borne out only when the
full entry is a repeating pattern. In practice this shouldn't happen
(apart from tests and the like). Hopefully lz4 will be fixed to avoid
this problem, or it will grow a new function which we can use [1], so
this fix should be remporary.
[1] https://groups.google.com/d/msg/lz4c/_3kkz5N6n00/oTahzqErCgAJ
|
|
The return value was used directly in an if, so an error was treated
as success; we need to bail out instead. An error should not happen,
unless we have a compression/decompression mismatch, so output a debug
line.
|
|
destructors
|
|
We treated -ENOENT errors with silent failure, for small messages.
Do the same for large messages.
|
|
Borked since
commit 3ee897d6c2401effbc82f5eef35fce405781d6c8
Author: Lennart Poettering <lennart@poettering.net>
Date: Wed Sep 23 01:00:04 2015 +0200
tree-wide: port more code to use send_one_fd() and receive_one_fd()
because here our fd is not connected and we need to specify
the address.
|
|
Also, check the return value of all calls.
They are documented to return 0, even if journald is not listening.
|
|
|
|
We only use the public api here, so don't include
log.h.
|
|
|
|
Two unrelated fixes
|
|
Most of the function is moved to acl-util.c to make it possible to
add tests in subsequent commit.
Setting of the mode in server_fix_perms is removed:
- we either just created the file ourselves, and the permission be better right,
- or the file was already there, and we should not modify the permissions.
server_fix_perms is renamed to server_fix_acls to better reflect new
meaning, and made static because it is only used in one file.
|
|
Let's distuingish the cases where our code takes an active role in
selinux management, or just passively reports whatever selinux
properties are set.
mac_selinux_have() now checks whether selinux is around for the passive
stuff, and mac_selinux_use() for the active stuff. The latter checks the
former, plus also checks UID == 0, under the assumption that only when
we run priviliged selinux management really makes sense.
Fixes: #1941
|
|
GLIB has recently started to officially support the gcc cleanup
attribute in its public API, hence let's do the same for our APIs.
With this patch we'll define an xyz_unrefp() call for each public
xyz_unref() call, to make it easy to use inside a
__attribute__((cleanup())) expression. Then, all code is ported over to
make use of this.
The new calls are also documented in the man pages, with examples how to
use them (well, I only added docs where the _unref() call itself already
had docs, and the examples, only cover sd_bus_unrefp() and
sd_event_unrefp()).
This also renames sd_lldp_free() to sd_lldp_unref(), since that's how we
tend to call our destructors these days.
Note that this defines no public macro that wraps gcc's attribute and
makes it easier to use. While I think it's our duty in the library to
make our stuff easy to use, I figure it's not our duty to make gcc's own
features easy to use on its own. Most likely, client code which wants to
make use of this should define its own:
#define _cleanup_(function) __attribute__((cleanup(function)))
Or similar, to make the gcc feature easier to use.
Making this logic public has the benefit that we can remove three header
files whose only purpose was to define these functions internally.
See #2008.
|
|
Fix stdout stream parsing
|
|
This is a continuation of the previous include sort patch, which
only sorted for .c files.
|
|
|
|
|
|
tree-wide: group include of libudev.h with sd-*
|
|
journalctl: don't print -- No entries -- in quiet mode
|
|
|
|
|
|
use them everywhere
|
|
|
|
|
|
|
|
siphash24: let siphash24_finalize() and siphash24() return the result…
|
|
Rather than passing a pointer to return the result, return it directly
from the function calls.
Also, return the result in native endianess, and let the callers care
about the conversion. For hash tables and bloom filters, we don't care,
but in order to keep MAC addresses and DHCP client IDs stable, we
explicitly convert to LE.
|
|
Sort the includes accoding to the new coding style.
|
|
Change the "out" parameter from uint8_t[8] to uint64_t. On architectures which
enforce pointer alignment this fixes crashes when we previously cast an
unaligned array to uint64_t*, and on others this should at least improve
performance as the compiler now aligns these properly.
This also simplifies the code in most cases by getting rid of typecasts. The
only place which we can't change is struct duid's en.id, as that is _packed_
and public API, so we can't enforce alignment of the "id" field and have to
use memcpy instead.
|
|
Adding 3/4th of the watchdog frequency as accuracy on top of 1/2 of the
watchdog frequency means we might end up at 5/4th of the frequency which
means we might miss the message from time to time.
Maybe fixes #1804
|
|
Previously, we'd rely on the mtime timestamps of the touch files to see
if our sync/rotation requests were already suppressed. This means we
rely on CLOCK_REALTIME timestamps. With this patch we instead store the
CLOCK_MONOTONIC timestamp *in* the touch files, and avoid relying on
mtime.
This should make things more reliable when the clock or underlying mtime
granularity is not very good.
This also adds warning messages if writing any of the flag files fails.
|
|
No functional changes.
|
|
|
|
Of course, ideally we'd just use normal synchronous bus calls, but this
is out of the question as long as we rely on dbus-daemon (which logs to
journald, and thus cannot use to avoid cyclic sync loops). Hence,
instead, reuse the wait logic already implemented for --sync, and use a
signal in one direction, and a mtime watch file for the reply.
|
|
With this new "--sync" switch we add a synchronous way to sync
everything queued to disk, and return only after that's complete. This
command gives the guarantee that anything queued before has hit the disk
before the command returns.
While we are at it, also improve the man pages and help text for
journalctl a bit.
|
|
The event might be flagged with stuff we don't expect, hence don't
be needlessly picky, just rely on the kernel passing us sensible events.
|
|
This is pretty much a work-around for a security vulnerability in
kernels that allow unprivileged user namespaces.
Fixes #1822.
|
|
Let's make sure to process all queued log data before exiting, so that
we don't unnecessary lose messages when shutting down.
https://github.com/systemd/systemd/pull/1812#issuecomment-155149871
|
|
The macro is generically useful for putting together search paths, hence
let's make it truly generic, by dropping the implicit ".d" appending it
does, and leave that to the caller. Also rename it from
CONF_DIRS_NULSTR() to CONF_PATHS_NULSTR(), since it's not strictly about
dirs that way, but any kind of file system path.
Also, mark CONF_DIR_SPLIT_USR() as internal macro by renaming it to
_CONF_PATHS_SPLIT_USR() so that the leading underscore indicates that
it's internal.
|
|
[v2] treewide: treatment of errno and other cleanups
|
|
with small manual cleanups for style.
|
