| Age | Commit message (Collapse) | Author |
|---|
|
Instead of use LIST_FOREACH_SAFE, just use the same, seperate destructor
everywhere.
|
|
All functions should either log the errors they run into, or only return
them in which case the caller should log them.
Make sure this rule is followed, so that each error is logged precisely
once, and neither never, nor more than once.
|
|
So far we tried to reserve the _t suffix to types we use like a value in
contrast to types we use as objects, hence let's do this in journalctl
too.
|
|
|
|
let's try to be valgrind clean
|
|
That way we can be sure we execute the destructors properly, and can be
valgrind-clean.
|
|
This method should greatly improve offset based lookup, by simply jumping
from one boot to the next boot. It starts at the journal head to get the
a boot ID, makes a _BOOT_ID match and then comes from the opposite
journal direction (tail) to get to the end that boot. After flushing the matches
and advancing the journal from that exact position, we arrive at the start
of next boot. Rinse and repeat.
This is faster than the old method of aggregating the full boot listing just
so we can jump to a specific boot, which can be a real pain on big journals
just for a mere "-b -1" case.
As an additional benefit --list-boots should improve slightly too, because
it does less seeking.
Note that there can be a change in boot order with this lookup method
because it will use the order of boots in the journal, not the realtime stamp
stored in them. That's arguably better, though.
Another deficiency is that it will get confused with boots interleaving in the
journal, therefore, it will refuse operation in --merge, --file and --directory mode.
https://bugs.freedesktop.org/show_bug.cgi?id=72601
|
|
|
|
Only if both keep_free and max_use are actually 0 we can shortcut things
and avoid vacuuming. If either are positive or -1 we need to execute the
vacuuming.
http://lists.freedesktop.org/archives/systemd-devel/2015-April/031382.html
|
|
Looks like sizeof(struct Header) is 240 not 224
|
|
They are not currently used, but the Makefile rules don't know that.
It's easier to ignore them, then to special-case creation rules.
|
|
A variety of changes:
- Make sure all our calls distuingish OOM from other errors if OOM is
not the only error possible.
- Be much stricter when parsing escaped paths, do not accept trailing or
leading escaped slashes.
- Change unit validation to take a bit mask for allowing plain names,
instance names or template names or an combination thereof.
- Refuse manipulating invalid unit name
|
|
Instead of looking up the tty from STDIN, let utmp_wall() take an argument
to specify an origin tty for the wall message. Only if that argument is
NULL do the STDIN lookup.
Also add an void *userdata argument that is handed back to the callback
function.
|
|
<audit-1400> is replaced by AVC, etc.
A fallback mechanism is provided for unlisted event types.
Occasionally new types are added to the kernel, but not too often.
Add a simple "test", which simply prints the mapping.
|
|
|
|
- fix some memory leaks on error conditions
- handle all error cases properly, and log about failures
- move HAVE_ACL and no-HAVE_ACL code closer to each other
|
|
This way users have the freedom to set or unset the FS_NOCOW_FL flag on
their journal files by setting it on the journal directory. Since our
default tmpfiles configuration now sets this flag on the directory the
flag is set by default on new files, however people can opt-out of this
by masking the tmpfiles file for it.
|
|
This shouldn't really fail and anyway not much we can do about it.
CID #996292, #996294, #996295.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Change cunescape() to return a normal error code, so that we can
distuingish OOM errors from parse errors.
This also adds a flags parameter to control whether "relaxed" or normal
parsing shall be done. If set no parse failures are generated, and the
only reason why cunescape() can fail is OOM.
|
|
- Move to its own file rm-rf.c
- Change parameters into a single flags parameter
- Remove "honour sticky" logic, it's unused these days
|
|
like:
src/shared/install.c: In function ‘unit_file_lookup_state’:
src/shared/install.c:1861:16: warning: ‘r’ may be used uninitialized in
this function [-Wmaybe-uninitialized]
return r < 0 ? r : state;
^
src/shared/install.c:1796:13: note: ‘r’ was declared here
int r;
^
|
|
Audit messages would be displayed as "unknown[1]".
Also specify AUTH as facility... This seems to be the closest match
(/* security/authorization messages */).
|
|
Replace ENOTSUP by EOPNOTSUPP as this is what linux actually uses.
|
|
Usually when using loop_read(), we want to read the full buffer.
Add a helper that mirrors loop_write(), and returns 0 when full buffer
was read, and an error otherwise.
Use -ENODATA for the short read, to distinguish it from a read error.
|
|
It is more elegant to do this in one step.
Coverity complains about the TOCTOU difference, but it is not an
actual problem (CID #1237777).
|
|
Introduced in fa6ac76083b8ff.
Might be related to CID #1261724, but I don't know if coverity can
recurse this deep.
|
|
|
|
|
|
Lack of this caused journalctl not to display a hint about missing groups
properly when the user lacks permissions.
|
|
|
|
For daemons which have a main configuration file, there's
little reason for the administrator to use configuration snippets.
They are useful for packagers which need to override settings, but
we shouldn't advertise that as the main way of configuring those
services.
https://bugs.freedesktop.org/show_bug.cgi?id=89397
|
|
Logs constantly show
systemd-journald[395]: Failed to set file attributes: Inappropriate ioctl for device
This is because ext4 does not support FS_NOCOW_FL.
[zj: fold into one conditional as suggested on the ML and
fix (preexisting) r/errno confusion in error message.]
|
|
Commit 668c965af "journal: skipping of exhausted journal files is bad if
direction changed" fixed a correctness issue, but it also significantly
limited the cases where the optimization that skips exhausted journal
files could apply.
As a result, some journalctl queries are much slower in v219 than in v218.
(e.g. queries where a "--since" cutoff should have quickly eliminated
older journal files from consideration, but didn't.)
If already in the initial iteration find_location_with_matches() finds
no entry, the journal file's location is not updated. This is fine,
except that:
- We must update at least f->last_direction. The optimization relies on
it. Let's separate that from journal_file_save_location() and update
it immediately after the direction checks.
- The optimization was conditional on "f->current_offset > 0", but it
would always be 0 in this scenario. This check is unnecessary for the
optimization.
|
|
This patch removes includes that are not used. The removals were found with
include-what-you-use which checks if any of the symbols from a header is
in use.
|
|
include-what-you-use automatically does this and it makes finding
unnecessary harder to spot. The only content of poll.h is a include
of sys/poll.h so should be harmless.
|
|
This fixes various issues found by globally reordering the include
sections of all .c files.
|
|
Leave it to the compiler to figure out whether it shall inline stuff or
not.
Only place where using static inline is OK to use is in in header
files, really.
|
|
|
|
After all it is now much more like strjoin() than strappend(). At the
same time, add support for NULL sentinels, even if they are normally not
necessary.
|
|
If we scale our buffer to be wide enough for the format string, we
should expect that the calculation was correct.
char_array_0() invocations are removed, since snprintf nul-terminates
the output in any case.
A similar wrapper is used for strftime calls, but only in timedatectl.c.
|
|
https://bugs.freedesktop.org/show_bug.cgi?id=87354
|
|
This reverts commit b914ea8d379b446c4c9fac4ba181771676ef38cd.
We really need to put a limit on all our resources, everywhere, and in
particular if we operate on external data.
Hence, let's reintroduce the limit, but bump it substantially, so that
it is guaranteed to be higher than any realistic RLIMIT_NOFILE setting.
|
|
Otherwise they can be optimized away with -DNDEBUG
|
|
|
