| Age | Commit message (Collapse) | Author |
|---|
|
first (or second)
Previously the returned object of constructor functions where sometimes
returned as last, sometimes as first and sometimes as second parameter.
Let's clean this up a bit. Here are the new rules:
1. The object the new object is derived from is put first, if there is any
2. The object we are creating will be returned in the next arguments
3. This is followed by any additional arguments
Rationale:
For functions that operate on an object we always put that object first.
Constructors should probably not be too different in this regard. Also,
if the additional parameters might want to use varargs which suggests to
put them last.
Note that this new scheme only applies to constructor functions, not to
all other functions. We do give a lot of freedom for those.
Note that this commit only changes the order of the new functions we
added, for old ones we accept the wrong order and leave it like that.
|
|
|
|
Upon startup the DHCP library will immediately send a DHCP Discover.
Handle the additional DHCP Discover checking and DHCP Offer sending
in test_addr_acq_recv_discover(). Write a zero UDP checksum, the
received XID and the faked MAC address into place to create a DHCP
message the library can accept.
Follow exactly the same steps when receiving a DHCP Request in
test_addr_acq_recv_request() and send the Ack. Check that the proper
addresses have been found by the DHCP library before exiting the
main loop and finishing the test.
|
|
Add a callback function that will handle the test case specific checking.
|
|
|
|
This fixes a regression introduced in e5002702.
|
|
We want to reuse these functions for the server library too.
|
|
|
|
Split the recevie_message callback into _raw and _udp parts and a generic
DHCPMessage handler.
Also always verify the xid/MAC, rather than only for udp messages.
|
|
Some DHCP servers will not work correctly if secs == 0, so round up
to at least 1.
|
|
|
|
This allows us users of the library to keep copies of old leases. This is
used by networkd to know what addresses to drop (if any) when the lease
expires.
In the future this may be used by DNAv4 and sd-dhcp-server.
|
|
Compute the 'secs' field as seconds since start of lease acquisition
procedure. Start off with a value of zero and increase it only for
each resent DHCP discover message. See the discussion before and
after http://www.ietf.org/mail-archive/web/dhcwg/current/msg05836.html
and Section 3.1 of RFC 2131.
|
|
Go back to Init state independent of the current state the client
is in.
|
|
A checksum field with value zero means no UDP checksum has been
computed for the packet.
|
|
|
|
|
|
This was originally included in the dhcp-client at my request, but it is not
really dhcp-specific and useful outside of it, so let's pull it out.
|
|
Unlike the other merged libs, the rest of libsystemd will never depend on
sd-dhcp-client, so there is no reason not to keep it separate.
|
|
|
|
My original patch only returned the first DNS server, but we might
want all of them.
|
|
|
|
We need to be able to stop the dhcp client at any time, and the function appears to be written to handle this.
|
|
GREEDY_REALLOC needs to have two size variables: one for the
allocated size, and a second one for the used size. Using
the allocated size only lead to leaving some elements unitialized
and assigning some more than once.
|
|
SipHash appears to be the new gold standard for hashing smaller strings
for hashtables these days, so let's make use of it.
|
|
|
|
Reuse existing functionality when adding T2 Rebinding support.
|
|
Factor out common code from timeout T1 handling and starting of
the DHCP client.
|
|
Expiration of T1 timeout takes the client to the Rebinding state,
where it attempts to renew its lease. Start by opening a DCHP unicast
socket as there now is a proper IP address set.
Compute the resend timer as half of the remaining time down to a
minimum of 60 seconds (RFC2131). Modify DHCP Request sending to send
only UDP DHCP data when unicasting. Also modify DHCP Ack/Nak
receiving such that the client_receive_ack() takes care of using
either the full IP, UDP, DHCP packet or only the DHCP payload
depending whether the client is in Requesting or Renewing state.
Finally always report DHCP_EVENT_IP_ACQUIRE from Requesting state
and only DHCP_EVENT_IP_CHANGE if the IP address was modified when
the lease was renewed.
|
|
Create a helper functions setting up an unicast DHCP UDP socket and
sending data. Add function stubs for the test program.
[tomegun: initialize structs when allocating, and drop unneccesary 'err']
|
|
|
|
Fix off-by-one error and notice that summing may need more than one
round for the result to be in the lower 16 bits.
|
|
When a DHCP Nak is received, return a DHCP_EVENT_NO_LEASE event. If
some other DHCP message is received or an error happens when parsing
options, return -ENOMSG in order to ignore the packet. There may be
more than one server serving the same subnet, each server will send
its Offer to the client.
|
|
|
|
|
|
This also fixes a minor indentation damage.
[tomegun: use close_noint_nofail() instead and drop 'err' variables]
|
|
|
|
Ignore DHCP Ack packets if they are found to be erroneous or have
an unexpected xid by setting the result to zero instead of propagating
an error. Also remember to report a DHCP Nak and stop the DHCP client.
|
|
test-fileio/test-strv:
Use the streq_ptr to make build-scan not worry about passing in a null
to a nonnull function.
test-dhcp-option:
Prevent a theoretical null pointer dereference
|
|
|
|
Define a notification callback and events for stopping and client
lease expiry. Add functions to fetch IP parameters from a lease.
|
|
Compute the default T1 and T2 timer values if they were not set by
the DHCP server. Verify that the values are reasonable.
|
|
Process a DHCP Ack/Nak in much the same way as an DHCP Offer. Factor
out header verification and process options sent. Add notification
functionality with discrete values for the outcome of the DHCP Ack/
Nak processing.
|
|
Add maximum message size option to keep some DHCP server implementations
from sending too big messages. See ConnMan commit
0c5c862749c05193cf4c513628328c6db02b5222.
|
|
Create and send a DHCP Request message reusing already existing parts
of the code. This causes factoring out IP and UDP header creation and
moving next timeout calculation to be done every time in the timer
callback function independent of DHCP state. Also add an exponential
part to the timer calculation, bail out if there are errors while
resending the DHCP message for the sixth or more times.
|
|
Create a function for handling the full IP, UDP and DHCP packet
and tie it to the main loop. Verify IP and UDP headers and checksum.
Creat a new lease structure with using the values supplied in the
DHCP message. Free the lease structure when client is stopped.
Split out socket handling into a creation and a sending part. As a
result modify the test code.
|
|
Require a main loop to be set when creating a DHCP client. Set up
a timer to resend DHCP Discover messages and add a 0-2 second
delay to the timeout value. Move to state Selecting after successful
sending of a Discover message.
|
|
The client is stopped and brought back to its initial state.
|
|
It was noticed by Grant Erickson in ConnMan commit
95e15c09350acf58d4707056ae2614570883ef66 that:
"Certain DHCP servers, such as that implemented in Mac OS X
(< 10.7) for its "Internet Sharing" feature, refuse to issue
a DHCP lease to clients that have not set a non-zero value
in their DISCOVER or REQUEST packets."
|
|
Set a fake MAC address and emulate raw packet sending. When the buffer
containing the Discover message is received, check selected IP and
UDP headers and compute IP header and UDP message checksums. Also
send the DHCP message for option parsing and expect a successful
outcome.
|
