| Age | Commit message (Collapse) | Author |
|---|
|
|
|
Both versions of the code are changed to allow the caller to override
DUID using simple rules: duid type and value may be specified, in
which case the caller is responsible to providing the contents,
or just duid type may be specified as DUID_TYPE_EN, in which case we
we fill in the values. In the future more support for other types may
be added, e.g. DUID_TYPE_LLT.
There still remains and ugly discrepancy between dhcp4 and dhcp6 code:
dhcp6 has sd_dhcp6_client_set_duid and sd_dhcp6_client_set_iaid and
requires client->state to be DHCP6_STATE_STOPPED, while dhcp4 has
sd_dhcp_client_set_iaid_duid and will reconfigure the client if it
is not stopped. This commit doesn't touch that part.
This addresses #3127 § 2.
|
|
|
|
|
|
|
|
|
|
|
|
Initialize auto variables with cleanup attribute, otherwise we
get a compiler warning with -fexceptions.
./configure CFLAGS='-Wmaybe-uninitialized -fexceptions -O2'
|
|
as such
|
|
This isn't an excercise in creating APIs that are hard to understand, hence
let's call a callback a callback.
|
|
Fixes: #2457
|
|
The function must never fail.
|
|
The server might answer to a DHCPREQUEST with a NAK and currently the
client restarts the configuration process immediately. It was
observed that this can easily generate loops in which the network is
flooded with DISCOVER,OFFER,REQUEST,NAK sequences.
RFC 2131 only states that "if the client receives a DHCPNAK message,
the client restarts the configuration process" without further
details.
Add a delay with exponential backoff between retries after NAKs to
limit the number of requests and cap the delay to 30 minutes.
|
|
libsystemd-network provides the public function
sd_dhcp_client_set_request_option() to enable the request of a given
DHCP option. However the enum defining such options is defined in the
internal header dhcp-protocol.h. Move the enum definition to the
public header sd-dhcp-client.h and properly namespace values.
|
|
canonical names
We'll need this later when putting together RR serializations to
checksum.
|
|
GLIB has recently started to officially support the gcc cleanup
attribute in its public API, hence let's do the same for our APIs.
With this patch we'll define an xyz_unrefp() call for each public
xyz_unref() call, to make it easy to use inside a
__attribute__((cleanup())) expression. Then, all code is ported over to
make use of this.
The new calls are also documented in the man pages, with examples how to
use them (well, I only added docs where the _unref() call itself already
had docs, and the examples, only cover sd_bus_unrefp() and
sd_event_unrefp()).
This also renames sd_lldp_free() to sd_lldp_unref(), since that's how we
tend to call our destructors these days.
Note that this defines no public macro that wraps gcc's attribute and
makes it easier to use. While I think it's our duty in the library to
make our stuff easy to use, I figure it's not our duty to make gcc's own
features easy to use on its own. Most likely, client code which wants to
make use of this should define its own:
#define _cleanup_(function) __attribute__((cleanup(function)))
Or similar, to make the gcc feature easier to use.
Making this logic public has the benefit that we can remove three header
files whose only purpose was to define these functions internally.
See #2008.
|
|
Network fixes
|
|
Let's change the return value to bool. If we encounter an error while
parsing, return "false" instead of the actual parsing error, after all
the specified hostname does not qualify for what the function is
supposed to test.
Dealing with the additional error codes was always cumbersome, and
easily misused, like for example in the DHCP code.
Let's also rename the functions from dns_name_root() to
dns_name_is_root(), to indicate that this function checks something and
returns a bool. Similar for dns_name_is_signal_label().
|
|
If a client sends a DECLINE or a server sends a NAK, they can include
a string with a message to explain the error. Parse this and print it
at debug level.
|
|
|
|
This adds support for the Client Fully Qualified Domain Name (FQDN)
option [RFC 4702] to libsystemd-network. The option can be used to
exchange information about a DHCPv4 client's fully qualified domain
name and about responsibility for updating the DNS RR related to the
client's address assignment.
Other popular DHCP clients (dhclient, dhcpcd) support this option and
it would be useful to have it in networkd too.
|
|
|
|
|
|
string-util.[ch]
There are more than enough calls doing string manipulations to deserve
its own files, hence do something about it.
This patch also sorts the #include blocks of all files that needed to be
updated, according to the sorting suggestions from CODING_STYLE. Since
pretty much every file needs our string manipulation functions this
effectively means that most files have sorted #include blocks now.
Also touches a few unrelated include files.
|
|
We don't care about timestamps down to the last usec, round to the closest sec
as that will be plenty for debugging purposes.
|
|
Prefix all constants with SD_DHCP_CLIENT_* to avoid namespacing
conflicts.
|
|
Don't underflow when calculating lease time.
|
|
The library so far always requested the NTP servers. This might be
unnecessary in some uses, hence let's move the request into networkd
instead.
|
|
a) drop handling of obsolete or unused DHCP options time_offset,
mtu_aging_timeout, policy filter, mdr, ttl, ip forwarding settings.
Should this become useful one day we can readd support for this.
b) For subnet mask and broadcast it is not always clear whether 0 or
255.255.255.255 might be valid, hence maintain a boolean indicating
validity next to it.
c) serialize/deserialize broadcast address, lifetime, T1 and T2 together
with the rest of the fields in dhcp_lease_save() and
dhcp_lease_load().
d) consistently return ENODATA from getter functions for data that is
missing in the lease.
e) add missing getter calls for broadcast, lifetime, T1, T2.
f) when decoding DHCP options, generate debug messages on parse
failures, but try to proceed if possible.
g) Similar, when deserializing a lease in dhcp_lease_load(), make sure
we deal nicely with unparsable fields, to provide upgrade compat.
h) fix some memory allocations
|
|
No need to invole atomic ops in single-threaded APIs, let's simplify
this.
|
|
In our API design, getter-functions don't ref objects. Calls like
foo_get_bar() will not ref 'bar'. We never do that and there is no real
reason to do it in single threaded APIs. If you need a ref-count, you
better take it yourself *BEFORE* doing anything else on the parent object
(as this might invalidate your pointer).
Right now, sd_dhcp?_get_lease() refs the lease it returns. A lot of
code-paths in systemd do not expect this and thus leak the lease
reference. Fix this by changing the API to not ref returned objects.
|
|
Seems to have been removed by mistake in:
9021bb9f935c93b516b10c88db2a212a9e3a8140
|
|
It's only marginally shorter then the usual for() loop, but certainly
more readable.
|
|
compuler figure that out...
|
|
|
|
This reverts commit 6ec8e7c763b7dfa82e25e31f6938122748d1608f.
This doesn't fix any issues, just makes the code harder to read.
|
|
|
|
This patch removes includes that are not used. The removals were found with
include-what-you-use which checks if any of the symbols from a header is
in use.
|
|
This reverts commit d6d810fbf8071f8510450dbacd1d083f37603656.
It's apparently not OK to pass MSG_CMSG_CLOEXEC to recvmsg() of raw
sockets.
|
|
|
|
In addition to the benefits listed in the RFC, this allows DHCP to work also in
case several interfaces share the same MAC address on the same link (IPVLAN).
Note that this will make the ClientID (so probably the assigned IP address)
change on upgrades. If it is desired to avoid that we would have to remember and
write back the ID (which the library supports, but networkd currently does not).
|
|
Types used for pids and uids in various interfaces are unpredictable.
Too bad.
|
|
This does not make a difference, but the code was confusing.
|
|
https://github.com/vlajos/misspell_fixer
https://github.com/torstehu/systemd/commit/b6fdeb618cf2f3ce1645b3315f15f482710c7ffa
Thanks to Torstein Husebo <torstein@huseboe.net>.
|
|
|
|
The lease is usually tied to the client ID, so users of the
lease may want to know what client ID it was acquired with.
|
|
The client identifier can be in many different formats, not just
the one that systemd creates from the Ethernet MAC address. Non-
ethernet interfaces may have different client IDs formats. Users
may also have custom client IDs that the wish to use to preserve
lease options delivered by servers configured with the existing
client ID.
|
|
client->secs wasn't getting set in the REBOOT state, causing
an assertion. REBOOT should work the same way as INIT, per
RFC 2131:
secs 2 Filled in by client, seconds elapsed since client
began address acquisition or renewal process.
REBOOT is necessary because some DHCP servers (eg on
home routers) do not hand back the same IP address unless the
'ciaddr' field is filled with that address, which DISCOVER
cannot do per the RFCs. This leads to multiple leases
on machine reboot or DHCP client restart.
|
|
To mirror the recent name change of the concept for sd_bus objects,
follow the same logic for sd_event_source objects, too.
|
|
The raw socket sd_event_source used for DHCP server solicitations
was simply dropped on the floor when creating the new UDP socket
after a lease has been acquired. Clean it up properly so we're
not still listening and responding to events on it.
|
