Age | Commit message (Collapse) | Author |
|
We don't have plural in the name of any other -util files and this
inconsistency trips me up every time I try to type this file name
from memory. "formats-util" is even hard to pronounce.
|
|
This should be handled fine now by .dir-locals.el, so need to carry that
stuff in every file.
|
|
GLIB has recently started to officially support the gcc cleanup
attribute in its public API, hence let's do the same for our APIs.
With this patch we'll define an xyz_unrefp() call for each public
xyz_unref() call, to make it easy to use inside a
__attribute__((cleanup())) expression. Then, all code is ported over to
make use of this.
The new calls are also documented in the man pages, with examples how to
use them (well, I only added docs where the _unref() call itself already
had docs, and the examples, only cover sd_bus_unrefp() and
sd_event_unrefp()).
This also renames sd_lldp_free() to sd_lldp_unref(), since that's how we
tend to call our destructors these days.
Note that this defines no public macro that wraps gcc's attribute and
makes it easier to use. While I think it's our duty in the library to
make our stuff easy to use, I figure it's not our duty to make gcc's own
features easy to use on its own. Most likely, client code which wants to
make use of this should define its own:
#define _cleanup_(function) __attribute__((cleanup(function)))
Or similar, to make the gcc feature easier to use.
Making this logic public has the benefit that we can remove three header
files whose only purpose was to define these functions internally.
See #2008.
|
|
|
|
|
|
capability-util.[ch]
The files are named too generically, so that they might conflict with
the upstream project headers. Hence, let's add a "-util" suffix, to
clarify that this are just our utility headers and not any official
upstream headers.
|
|
|
|
|
|
There are more than enough to deserve their own .c file, hence move them
over.
|
|
string-util.[ch]
There are more than enough calls doing string manipulations to deserve
its own files, hence do something about it.
This patch also sorts the #include blocks of all files that needed to be
updated, according to the sorting suggestions from CODING_STYLE. Since
pretty much every file needs our string manipulation functions this
effectively means that most files have sorted #include blocks now.
Also touches a few unrelated include files.
|
|
Another Coccinelle patch.
|
|
Patch via coccinelle.
|
|
This replaces this:
free(p);
p = NULL;
by this:
p = mfree(p);
Change generated using coccinelle. Semantic patch is added to the
sources.
|
|
session
ENODATA is how we usually indicate such "missing info" cases, so we
should do this here, too.
|
|
This reverts commit d4d00020d6ad855d65d31020fefa5003e1bb477f. The idea of
the commit is broken and needs to be reworked. We really cannot reduce
the bus-addresses to a single address. We always will have systemd with
native clients and legacy clients at the same time, so we also need both
addresses at the same time.
|
|
We should not fall back to dbus-1 and connect to the proxy when kdbus
returns an error that indicates that kdbus is running but just does not
accept new connections because of quota limits or something similar.
Using is_kdbus_available() in libsystemd/ requires it to move from
shared/ to libsystemd/.
Based on a patch from David Herrmann:
https://github.com/systemd/systemd/pull/886
|
|
Also reorder the code a bit to be easier to parse.
|
|
|
|
instance of a process
units are organized in slice trees, not only for the system instance,
but also for user systemd instances, expose this properly.
|
|
A number of fields do not apply to all processes, including: there a
processes without a controlling tty, without parent process, without
service, user services or session. To distuingish these cases from the
case where we simply don't have the data, always return ENXIO for them,
while returning ENODATA for the case where we really lack the
information.
Also update the credentials dumping code to show this properly. Fields
that are known but do not apply are now shown as "n/a".
Note that this also changes some of the calls in process-util.c and
cgroup-util.c to return ENXIO for these cases.
|
|
This is useful to print wall messages from logind with the right client
tty. (to be added in a later patch)
|
|
|
|
kdbus has been passing us the ppid file for a while, actually make use
of it.
|
|
Also, when we do permissions checks using creds, verify that we don't do
so based on augmented creds, as extra safety check.
|
|
is free
|
|
Let's better be safe than sorry.
|
|
known names
|
|
|
|
|
|
Replace ENOTSUP by EOPNOTSUPP as this is what linux actually uses.
|
|
After some reconsideration, we decided to move the binary protocol
back to 64-bit wide UIDs and GIDs. After all, it should be possible
to redefine [gu]id_t to uint64_t and things should continue to
work. As we want to avoid such data types in kdbus.h, let's move
back to 64-bit values and be safe.
In sd-bus, we have to do a translation between uint64_t and gid_t
now for supplementary gids.
Some inline comments have also been updated in kdbus upstream.
|
|
This patch removes includes that are not used. The removals were found with
include-what-you-use which checks if any of the symbols from a header is
in use.
|
|
|
|
The kernel provides capabilities as a u32 array, sd-bus uses an u8 array.
This works fine on little-endian as both are encoded the same way.
However, this fails on big-endian if we do not perform sufficient
byte-swapping on each u32 entry.
This patch makes sd-bus use u32, too. We avoid changing any kernel
provided data so we can keep pointing into kdbus pool buffers which
contain u32 arrays.
|
|
The number of available caps can be read from
/proc/sys/kernel/cap_last_cap during runtime. Our helper cap_last_cap()
does that, so there's no reason to remember the size of any capability
cache. We can just pre-allocate arrays with a suitable size for all
available caps and reject any higher caps.
The kernel capability API uses u32 as base so make sure we do the same.
Note that this is specified by POSIX, so it's unlikely to change.
|
|
As kdbus no longer exports this, remove all traces from sd-bus too
|
|
|
|
|
|
kdbus
|
|
to us, no need to convert to uid_t manually
This way, we can save one allocation and avoid copying the array
unnecesarily.
|
|
creds object
|
|
|
|
KDBUS_ITEM_PIDS structure from KDBUS_ITEM_CREDS
Also:
- adds support for euid, suid, fsuid, egid, sgid, fsgid fields.
- makes augmentation of creds with data from /proc explicitly
controllable to give apps better control over this, given that this is
racy.
- enables augmentation for kdbus connections (previously we only did it
for dbus1). This is useful since with recent kdbus versions it is
possible for clients to control the metadata they want to send.
- changes sd_bus_query_sender_privilege() to take the euid of the client
into consideration, if known
- when we don't have permissions to read augmentation data from /proc,
don't fail, just don't add the data in
|
|
kdbus recently renamed this concept, and so should we in what we expose
in userspace.
|
|
No functional change expected :)
|
|
sd_bus_path_{encode,decode}()
The new calls work similarly, but enforce a that a common, fixed bus
path prefix is used.
This follows discussions with Simon McVittie on IRC that it should be a
good idea to make sure that people don't use the escaping applied here
too wildly as anything other than the last label of a bus path.
|
|
first (or second)
Previously the returned object of constructor functions where sometimes
returned as last, sometimes as first and sometimes as second parameter.
Let's clean this up a bit. Here are the new rules:
1. The object the new object is derived from is put first, if there is any
2. The object we are creating will be returned in the next arguments
3. This is followed by any additional arguments
Rationale:
For functions that operate on an object we always put that object first.
Constructors should probably not be too different in this regard. Also,
if the additional parameters might want to use varargs which suggests to
put them last.
Note that this new scheme only applies to constructor functions, not to
all other functions. We do give a lot of freedom for those.
Note that this commit only changes the order of the new functions we
added, for old ones we accept the wrong order and leave it like that.
|
|
|
|
|
|
|