| Age | Commit message (Collapse) | Author |
|---|
|
The kernel provides capabilities as a u32 array, sd-bus uses an u8 array.
This works fine on little-endian as both are encoded the same way.
However, this fails on big-endian if we do not perform sufficient
byte-swapping on each u32 entry.
This patch makes sd-bus use u32, too. We avoid changing any kernel
provided data so we can keep pointing into kdbus pool buffers which
contain u32 arrays.
|
|
The number of available caps can be read from
/proc/sys/kernel/cap_last_cap during runtime. Our helper cap_last_cap()
does that, so there's no reason to remember the size of any capability
cache. We can just pre-allocate arrays with a suitable size for all
available caps and reject any higher caps.
The kernel capability API uses u32 as base so make sure we do the same.
Note that this is specified by POSIX, so it's unlikely to change.
|
|
Drop spurious 'we'.
|
|
files from core
Stuff in src/shared or src/libsystemd should *never* include code from
src/core or any of the tools, so don't do that here either. It's not OK!
|
|
Kernel notifications carry a timestamp now, so make sure
bus_kernel_translate_message() doesn't complain when it stumbles across
them.
|
|
Make sure to set send-attach-flags on BUS_MAKE. These control which
information is revealed about the bus-owner.
|
|
Make sure we don't call into any bus_kernel_*() functions before
b->is_kernel is set to true. Hard-code the CMD_FREE just like the other
helpers do.
|
|
Changes:
* bloom parameters are returned in an offset via HELLO
* FREE now takes items just like any other ioctl
|
|
Sync up with recent kdbus changed:
* several ioctls gained .size and .items members (but still unused)
* CMD_SEND gained its own ioctl structure
* several members of kdbus_msg were dropped as they were only used during
SEND, not during RECV etc.
* CMD_RECV and CMD_SEND now share a kdbus_reply member which contains the
offset and size of the returned message.
|
|
kdbus is not available
|
|
As kdbus no longer exports this, remove all traces from sd-bus too
|
|
kdbus-git gained two new features:
* memfd offsets: This allows to specify a 'start' offset in kdbus_memfd
so you can send partial memfd hunks instead of always
the full memfd
* KDBUS_HELLO_UNPRIVILEGED: If passed during HELLO, the client will be
treated as unprivileged.
|
|
Implement a recent change in the kdbus pool logic:
PAYLOAD_VEC_OFF items are now referencing offsets relative to the
connection's pool, not to the item itself. Follow this change in
sd-bus.
|
|
|
|
Let's do this right from the beginning, to prepare ground for udev
messages that most likely want to store list of strings (for device
tags) in messages, and filter on them.
|
|
connected to a system or a user bus
|
|
Also, make the call to free kdbus slices generic and use it everywhere
|
|
It corrrectly handles both positive and negative errno values.
|
|
As a followup to 086891e5c1 "log: add an "error" parameter to all
low-level logging calls and intrdouce log_error_errno() as log calls
that take error numbers", use sed to convert the simple cases to use
the new macros:
find . -name '*.[ch]' | xargs sed -r -i -e \
's/log_(debug|info|notice|warning|error|emergency)\("(.*)%s"(.*), strerror\(-([a-zA-Z_]+)\)\);/log_\1_errno(-\4, "\2%m"\3);/'
Multi-line log_*() invocations are not covered.
And we also should add log_unit_*_errno().
|
|
|
|
initialize it as such
|
|
|
|
shouldn't confuse the empty list with unknown information
|
|
|
|
|
|
kdbus
|
|
|
|
The kdbus module will later get a policy that endpoint-names are
restricted to "<uid>-<name>" just like bus-names. Make sure that systemd
is already compatible to that.
|
|
to us, no need to convert to uid_t manually
This way, we can save one allocation and avoid copying the array
unnecesarily.
|
|
We changed creds to u32, so fix systemd sd-bus to acknowledge that.
|
|
attached to incoming messages
We don't know what the activated service might want in the end, hence
enable everything current and future, just to be sure.
|
|
|
|
On the system and user busses we create it's the receiver that chooses
which metadata is attched, not the sender, hence set the requirement
mask to ANY, to allow any current of future credential bit to be
attached.
|
|
|
|
dropped broadcast messages and proceeding
|
|
|
|
Also, properly keep track of incoming additional service names.
|
|
kernel messages
|
|
|
|
KDBUS_ITEM_PIDS structure from KDBUS_ITEM_CREDS
Also:
- adds support for euid, suid, fsuid, egid, sgid, fsgid fields.
- makes augmentation of creds with data from /proc explicitly
controllable to give apps better control over this, given that this is
racy.
- enables augmentation for kdbus connections (previously we only did it
for dbus1). This is useful since with recent kdbus versions it is
possible for clients to control the metadata they want to send.
- changes sd_bus_query_sender_privilege() to take the euid of the client
into consideration, if known
- when we don't have permissions to read augmentation data from /proc,
don't fail, just don't add the data in
|
|
kdbus has seen a larger update than expected lately, most notably with
kdbusfs, a file system to expose the kdbus control files:
* Each time a file system of this type is mounted, a new kdbus
domain is created.
* The layout inside each mount point is the same as before, except
that domains are not hierarchically nested anymore.
* Domains are therefore also unnamed now.
* Unmounting a kdbusfs will automatically also detroy the
associated domain.
* Hence, the action of creating a kdbus domain is now as
privileged as mounting a filesystem.
* This way, we can get around creating dev nodes for everything,
which is last but not least something that is not limited by
20-bit minor numbers.
The kdbus specific bits in nspawn have all been dropped now, as nspawn
can rely on the container OS to set up its own kdbus domain, simply by
mounting a new instance.
A new set of mounts has been added to mount things *after* the kernel
modules have been loaded. For now, only kdbus is in this set, which is
invoked with mount_setup_late().
|
|
kdbus learned to accept both a numerical destination ID as well as a
well-known-name. In that case, kdbus makes sure that the numerical ID is in
fact the owner of the provided name and fails otherwise.
This allows for race-free assertion of a bus name owner while sending a
message, which is a requirement for bus-proxyd.
Add two new fields to sd_bus_message, and set the numerical ID to
verify_destination_id if bus_message_setup_kmsg() is called for a
message with a well-known name.
Also, set the destination's name in the kdbus item to .destination_ptr
if it is non-NULL.
Normal users should not touch these fields, and they're not publicy
accessible.
|
|
|
|
The metadata logic in kdbus has seen a rework, and the only mandatory
change we have to follow for now is that attach_flags in kdbus_cmd_hello
is now split into two parts, attach_flags_send and attach_flags_recv.
|
|
kdbus recently renamed this concept, and so should we in what we expose
in userspace.
|
|
Catch up with some changes in kdbus.h:
* KDBUS_{ITEM,ATTACH}_CONN_NAME were renamed to
KDBUS_{ITEM,ATTACH}_CONN_DESCRIPTION, so the term 'name' is not
overloaded as much.
* The item types were re-ordered a little so they are lined up to the
order of the corresponding KDBUS_ATTACH flags
* A new item type KDBUS_ITEM_OWNED_NAME was introduced, designated to
store a struct kdbus_name in item->name. KDBUS_ITEM_NAME soley
stores data in item->str now
* Some kerneldoc fixes
|
|
|
|
|
|
We really shouldn't create fds ever that have the flag unset.
|
|
Some comment fixes and header cleanups in kdbus.h, and the task capability
meta information has been factored out to its own struct.
|
