| Age | Commit message (Collapse) | Author |
|---|
|
sd_bus_message_get_errno can currently return either a number of
different poitive errno values (from bus-error-mapping), or a negative
EINVAL if passed null as parameter.
The check for null parameter was introduced in 40ca29a1370379d43e44c0ed425eecc7218dcbca
at the same as the function was renamed from bus_message_to_errno and
made public API. Before becoming public the function used to return
only negative values.
It is weird to have a function return both positive and negative errno
and it generally looks like a mistake. The function is guarded by the
--enable-kdbus flags so I wonder if we still have time to fix it up?
It does not have any documentation yet. However, except for a few details
it is just a convenient way to call sd_bus_error_get_errno which is documented
to return only positive errno.
This patch makes it return only positive errno and fixes up the two
calls to the function that tried to cope with both positive and negative
values.
|
|
It is redundant to store 'hash' and 'compare' function pointers in
struct Hashmap separately. The functions always comprise a pair.
Store a single pointer to struct hash_ops instead.
systemd keeps hundreds of hashmaps, so this saves a little bit of
memory.
|
|
Actually unref the buscreds when we are not going to return a
pointer to them. As when bus_creds_add_more fails we immediately
return the error code otherwise and leak the new buscreds.
Found with coverity. Fixes: CID#1237761
|
|
This should help in debugging failing event sources.
|
|
We must not access slot->floating after we possible dropped the last
reference to it. Fix all callback-invocations to first check
slot->floating and possible disconnect the slot, then release the last
reference.
|
|
On systems without properly setup systemd, cg_get_root_path returns
-ENOENT. This means that busctl doesn't display much information.
busctl monitor also fails whenever it intercepts messages.
This fix fakes creates a fake "/" root cgroup which lets busctl work
on such systems.
|
|
|
|
|
|
|
|
systemctl -H root@foobar:waldi
will now show a list of services running on container "waldi" on host
"foobar", using "root" for authenticating at "foobar".
Since entereing a container requires priviliges, this will only work
correctly for root logins.
|
|
This makes sure we actually release the bus and all the messages it
references.
|
|
When a caller drops all references to a bus and its messages while the
messages where still queue, this causes the bus to reference the
messages, and the messages to reference the bus, without anybody else
keeping a reference, which is something we so far considered a leak, and
tried to fix with a GC logic that would recognize cases like this, and
drop the reference.
This GC logic has been broken sofar, and remained unfixed. This commit
removes it altogther, replacing it with nothing. The rationale is that
simply because all refs to the bus have been dropped its queued messages
should *still* be written to the bus, even if the caller doesn't retain
any reference to either bus nor message. This means it was actually
wrong to attempt to clean up the bus in this case.
The proper way how applications should handle this is by explicitly
invoking sd_bus_close(), when they want busses to go away. This is
probably want they want to do anyway to avoid getting spurious
callbacks after they stopped using a bus.
|
|
|
|
Also, make sure we automatically destroy reply callbacks that are
floating.
|
|
No functional change expected :)
|
|
attached to a bus connection
This makes callback behaviour more like sd-event or sd-resolve, and
creates proper object for unregistering callbacks.
Taking the refernce to the slot is optional. If not taken life time of
the slot will be bound to the underlying bus object (or in the case of
an async call until the reply has been recieved).
|
|
sd-bus and sd-event
|
|
The bug was introducted in a3d59cd1 ("sd-bus: don't use assert_return()
to check for disconnected bus connections")
|
|
CLOCK_BOOTTIME_ALARM, too
|
|
If you allocate a message with bus==NULL and then unref the main bus,
it will free your message underneath and your program will go boom!
To fix that, we really need to figure out what the semantics for
self-references (m->bus) should be and when/where/what accesses are
actually allowed.
Same is true for the pseudo-thread-safety we employ..
|
|
In sd_bus_unref() we check for self-reference loops and destruct our
queues in case we're the only reference holders. However, we do _not_
modify our own ref-count, thus effectively causing the
message-destructions to enter with the same reference count as we did.
The only reason this doesn't cause an endless recursion (or trigger
assert(m->n_ref > 0) in sd_bus_message_unref()) is the fact that we
decrease queue-counters _before_ calling _unref(). That's not obvious at
all, so add a big fat note in bus_reset_queues() to everyone touching that
code.
|
|
A terminated connection is a runtime error and not a developer mistake,
hence don't use assert_return() to check for it.
|
|
|
|
|
|
negotiate it, refuse to take it
This makes sure we don't mishandle if developers specificy a different
AcceptFileDescriptors= setting in .busname units then they set for the
bus connection in the activated program.
|
|
safe_close() automatically becomes a NOP when a negative fd is passed,
and returns -1 unconditionally. This makes it easy to write lines like
this:
fd = safe_close(fd);
Which will close an fd if it is open, and reset the fd variable
correctly.
By making use of this new scheme we can drop a > 200 lines of code that
was required to test for non-negative fds or to reset the closed fd
variable afterwards.
|
|
|
|
cookie hash table access
This broke hashtable lookups for the message cookies on s390x, which is
a 64bit BE machine where accessing 32bit values as 64bit and vice versa
will explode.
Also, while we are at it, be a bit more careful when dealing with the
64bit cookies we expose and the 32bit serial numbers dbus uses in its
payload.
Problem identified by Fridrich Strba.
|
|
|
|
sd_bus_path_{encode,decode}()
The new calls work similarly, but enforce a that a common, fixed bus
path prefix is used.
This follows discussions with Simon McVittie on IRC that it should be a
good idea to make sure that people don't use the escaping applied here
too wildly as anything other than the last label of a bus path.
|
|
This is primarily useful for services that need to track clients which
reference certain objects they maintain, or which explicitly want to
subscribe to certain events. Something like this is done in a large
number of services, and not trivial to do. Hence, let's unify this at
one place.
This also ports over PID 1 to use this to ensure that subscriptions to
job and manager events are correctly tracked. As a side-effect this
makes sure we properly serialize and restore the track list across
daemon reexec/reload, which didn't work correctly before.
This also simplifies how we distribute messages to broadcast to the
direct busses: we only track subscriptions for the API bus and
implicitly assume that all direct busses are subscribed. This should be
a pretty OK simplification since clients connected via direct bus
connections are shortlived anyway.
|
|
This partially reverts 41a55c46ab8fb4ef6727434227071321fc762cce
Some specifications we want to stay compatibility actually document
/var/run, not /run, and we should stay compatible with that. In order to
make sure our D-Bus implementation works on any system, regardless if
running systemd or not, we should always use /var/run which is the
only path mandated by the D-Bus spec.
Similar, glibc hardcodes the utmp location to /var/run, and this is
exposed in _UTMP_PATH in limits.h, hence let's stay in sync with this
public API, too.
We simply do not support systems where /var/run is not a symlink → /run.
Hence both are equivalent. Staying compatible with upstream
specifications hence weighs more than cleaning up superficial
appearance.
|
|
/run was already used almost everywhere, fix the remaining places
for consistency.
|
|
../src/shared/unit-name.c:462: error: undefined reference to 'sd_bus_label_escape'
../src/shared/unit-name.c:477: error: undefined reference to 'sd_bus_label_unescape'
collect2: error: ld returned 1 exit status
|
|
first (or second)
Previously the returned object of constructor functions where sometimes
returned as last, sometimes as first and sometimes as second parameter.
Let's clean this up a bit. Here are the new rules:
1. The object the new object is derived from is put first, if there is any
2. The object we are creating will be returned in the next arguments
3. This is followed by any additional arguments
Rationale:
For functions that operate on an object we always put that object first.
Constructors should probably not be too different in this regard. Also,
if the additional parameters might want to use varargs which suggests to
put them last.
Note that this new scheme only applies to constructor functions, not to
all other functions. We do give a lot of freedom for those.
Note that this commit only changes the order of the new functions we
added, for old ones we accept the wrong order and leave it like that.
|
|
This matches the API of previous headers, such as sd-journal.h.
|
|
|
|
|
|
|
|
Add new calls sd_bus_open() and sd_bus_default() for connecting to the
starter bus a service was invoked for, or -- if the process is not a
bus-activated service -- the appropriate bus for the scope the process
has been started in.
|
|
|
|
|
|
Two verbs in a function name suck, so let's simplify this a bit.
|
|
|
|
We still only produce on .so, but let's keep the sources separate to make things a bit
less messy.
|
