summaryrefslogtreecommitdiff
path: root/src/libsystemd/sd-bus
AgeCommit message (Collapse)Author
2016-01-25resolve: generate a nice clean error when clients try to resolve a name when ↵Lennart Poettering
the network is down
2016-01-19resolved: add bus API for configuring per-link DNS settingsLennart Poettering
This is useful for alternative network management solutions (such as NetworkManager) to push DNS configuration data into resolved. The calls will fail should networkd already have taken possesion of a link, so that the bus API is only available if we don't get the data from networkd.
2016-01-19resolved: add a couple of errors to the error mapping tablesLennart Poettering
These were previously forgotten, add them now.
2016-01-18bus-kernel: reword assignment of dst_id in bus_message_setup_kmsgZbigniew Jędrzejewski-Szmek
Setting of dst_id was based on interplay of two booleans, making the logic hard to follow (for humans and compilers alike). gcc was confused and emmitted a warning about an uninitialized variable. Rework the code to make it obvious that dst_id is set properly.
2016-01-18test-bus-error: add tests for setting error == 0Zbigniew Jędrzejewski-Szmek
2016-01-18bus-error: verify additional error maps during installationZbigniew Jędrzejewski-Szmek
Go over the entries in the map and check that they make sense. Tests are added. In the future we might want to do additional checks, e.g. verifying that the error names are in the expected format.
2016-01-18basic,bus-error: return negative error from errno_from_nameZbigniew Jędrzejewski-Szmek
errno_from_name used an unusual return convention where 0 meant "not found". This tripped up config_parse_syscall_errno(), which would treat that as success. Return -EINVAL instead, and adjust bus_error_name_to_errno() for the new convention. Also remove a goto which was used as a simple if and clean up surroudning code a bit.
2016-01-12tree-wide: use xsprintf() where applicableDaniel Mack
Also add a coccinelle receipt to help with such transitions.
2016-01-11resolved: don't attempt to send queries for DNSSEC RR types to servers not ↵Lennart Poettering
supporting them If we already degraded the feature level below DO don't bother with sending requests for DS, DNSKEY, RRSIG, NSEC, NSEC3 or NSEC3PARAM RRs. After all, we cannot do DNSSEC validation then anyway, and we better not press a legacy server like this with such modern concepts. This also has the benefit that when we try to validate a response we received using DNSSEC, and we detect a limited server support level while doing so, all further auxiliary DNSSEC queries will fail right-away.
2016-01-05tests: use sd_bus_flush_close_unref instead of sd_bus_unref in test-bus-cleanupEvgeny Vereshchagin
Fixes: $ make valgrind-tests TESTS=test-bus-cleanup ==6363== 9 bytes in 1 blocks are possibly lost in loss record 1 of 28 ==6363== at 0x4C2BBCF: malloc (vg_replace_malloc.c:299) ==6363== by 0x197D12: hexmem (hexdecoct.c:79) ==6363== by 0x183083: bus_socket_start_auth_client (bus-socket.c:639) ==6363== by 0x1832A0: bus_socket_start_auth (bus-socket.c:678) ==6363== by 0x183438: bus_socket_connect (bus-socket.c:705) ==6363== by 0x14B0F2: bus_start_address (sd-bus.c:1053) ==6363== by 0x14B592: sd_bus_start (sd-bus.c:1134) ==6363== by 0x14B95E: sd_bus_open_system (sd-bus.c:1235) ==6363== by 0x1127E2: test_bus_open (test-bus-cleanup.c:42) ==6363== by 0x112AAE: main (test-bus-cleanup.c:87) ==6363== ... $ ./libtool --mode=execute valgrind ./test-bus-cleanup ==6584== LEAK SUMMARY: ... ==6584== possibly lost: 10,566 bytes in 27 blocks
2016-01-04resolved: explicitly handle case when the trust anchor is emptyLennart Poettering
Since we honour RFC5011 revoked keys it might happen we end up with an empty trust anchor, or one where there's no entry for the root left. With this patch the logic is changed what to do in this case. Before this patch we'd end up requesting the root DS, which returns with NODATA but a signed NSEC we cannot verify, since the trust anchor is empty after all. Thus we'd return a DNSSEC result of "missing-key", as we lack a verified version of the key. With this patch in place, look-ups for the root DS are explicitly recognized, and not passed on to the DNS servers. Instead, if downgrade-ok mode is on an unsigned NODATA response is synthesized, so that the validator code continues under the assumption the root zone was unsigned. If downgrade-ok mode is off a new transaction failure is generated, that makes this case recognizable.
2016-01-04resolved: introduce a proper bus error for DNSSEC validation errorsLennart Poettering
2016-01-01Merge pull request #2241 from poettering/dnssec9Tom Gundersen
Ninth DNSSEC patch set
2015-12-29resolved: properly handle SRV RRs with the DNS root as hostnameLennart Poettering
2015-12-29resolved: add errno mapping for BUS_ERROR_CONNECTION_FAILURELennart Poettering
This was missing when the error type was added in ac720200b7e5b80cc4985087e38f3452e5b3b080.
2015-12-29resolved: change mapping of BUS_ERROR_NO_NAME_SERVERS to ESRCHLennart Poettering
EIO is really too generic, and indicates transmission problems.
2015-12-29tests: fix memory leak in test-bus-marshalEvgeny Vereshchagin
Fixes: ``` $ ./configure ... --enable-dbus $ make $ make valgrind-tests TESTS=test-bus-marshal ... ==25301== 51 bytes in 1 blocks are definitely lost in loss record 7 of 18 ==25301== at 0x4C2DD9F: realloc (in /usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so) ==25301== by 0x5496B8C: ??? (in /lib/x86_64-linux-gnu/libdbus-1.so.3.14.3) ==25301== by 0x54973E3: _dbus_string_append_printf_valist (in /lib/x86_64-linux-gnu/libdbus-1.so.3.14.3) ==25301== by 0x547E5C2: _dbus_set_error_valist (in /lib/x86_64-linux-gnu/libdbus-1.so.3.14.3) ==25301== by 0x547E73E: dbus_set_error (in /lib/x86_64-linux-gnu/libdbus-1.so.3.14.3) ==25301== by 0x548969A: dbus_message_demarshal (in /lib/x86_64-linux-gnu/libdbus-1.so.3.14.3) ==25301== by 0x115C1A: main (test-bus-marshal.c:244) ==25301== ```
2015-12-26resolved: generate an explicit transaction error when we cannot reach server ↵Lennart Poettering
via TCP Previously, if we couldn't reach a server via UDP we'd generate an MAX_ATTEMPTS transaction result, but if we couldn't reach it via TCP we'd generate a RESOURCES transaction result. While it is OK to generate two different errors I think, "RESOURCES" is certainly a misnomer. Introduce a new transaction result "CONNECTION_FAILURE" instead.
2015-12-02tests: turn check if manager cannot be intialized into macroZbigniew Jędrzejewski-Szmek
We need to check the same thing in multiple tests. Use a shared macro to make it easier to update the list of errnos. Change the errno code for "unitialized cgroup fs" for ENOMEDIUM. Exec format error looks like something more serious. This fixes test-execute invocation in mock.
2015-11-27selinux: split up mac_selinux_have() from mac_selinux_use()Lennart Poettering
Let's distuingish the cases where our code takes an active role in selinux management, or just passively reports whatever selinux properties are set. mac_selinux_have() now checks whether selinux is around for the passive stuff, and mac_selinux_use() for the active stuff. The latter checks the former, plus also checks UID == 0, under the assumption that only when we run priviliged selinux management really makes sense. Fixes: #1941
2015-11-27tree-wide: expose "p"-suffix unref calls in public APIs to make gcc cleanup easyLennart Poettering
GLIB has recently started to officially support the gcc cleanup attribute in its public API, hence let's do the same for our APIs. With this patch we'll define an xyz_unrefp() call for each public xyz_unref() call, to make it easy to use inside a __attribute__((cleanup())) expression. Then, all code is ported over to make use of this. The new calls are also documented in the man pages, with examples how to use them (well, I only added docs where the _unref() call itself already had docs, and the examples, only cover sd_bus_unrefp() and sd_event_unrefp()). This also renames sd_lldp_free() to sd_lldp_unref(), since that's how we tend to call our destructors these days. Note that this defines no public macro that wraps gcc's attribute and makes it easier to use. While I think it's our duty in the library to make our stuff easy to use, I figure it's not our duty to make gcc's own features easy to use on its own. Most likely, client code which wants to make use of this should define its own: #define _cleanup_(function) __attribute__((cleanup(function))) Or similar, to make the gcc feature easier to use. Making this logic public has the benefit that we can remove three header files whose only purpose was to define these functions internally. See #2008.
2015-11-18tree-wide: sort includes in *.hThomas Hindoe Paaboel Andersen
This is a continuation of the previous include sort patch, which only sorted for .c files.
2015-11-17Merge pull request #1923 from zonque/siphashLennart Poettering
siphash24: let siphash24_finalize() and siphash24() return the result…
2015-11-16siphash24: let siphash24_finalize() and siphash24() return the result directlyDaniel Mack
Rather than passing a pointer to return the result, return it directly from the function calls. Also, return the result in native endianess, and let the callers care about the conversion. For hash tables and bloom filters, we don't care, but in order to keep MAC addresses and DHCP client IDs stable, we explicitly convert to LE.
2015-11-16tree-wide: sort includesThomas Hindoe Paaboel Andersen
Sort the includes accoding to the new coding style.
2015-11-16tree-wide: add missing includesThomas Hindoe Paaboel Andersen
Add a few includes that we rely on to be include already.
2015-11-16siphash24: change result argument to uint64_tMartin Pitt
Change the "out" parameter from uint8_t[8] to uint64_t. On architectures which enforce pointer alignment this fixes crashes when we previously cast an unaligned array to uint64_t*, and on others this should at least improve performance as the compiler now aligns these properly. This also simplifies the code in most cases by getting rid of typecasts. The only place which we can't change is struct duid's en.id, as that is _packed_ and public API, so we can't enforce alignment of the "id" field and have to use memcpy instead.
2015-11-11sd-bus: don't try to acquire connection selinux label unless selinux is ↵Lennart Poettering
actually enabled Otherwise we might end up mistaking a SMACK label for an selinux label. Also, fixes unexpect debug messages: http://lists.freedesktop.org/archives/systemd-devel/2015-November/034913.html
2015-11-06doc: correct punctuation and improve typography in documentationJan Engelhardt
2015-10-27util-lib: split out allocation calls into alloc-util.[ch]Lennart Poettering
2015-10-27util-lib: split out printf() helpers to stdio-util.hLennart Poettering
2015-10-27io-util.h: move iovec stuff from macro.h to io-util.hLennart Poettering
2015-10-27user-util: move UID/GID related macros from macro.h to user-util.hLennart Poettering
2015-10-27src/basic: rename audit.[ch] → audit-util.[ch] and capability.[ch] → ↵Lennart Poettering
capability-util.[ch] The files are named too generically, so that they might conflict with the upstream project headers. Hence, let's add a "-util" suffix, to clarify that this are just our utility headers and not any official upstream headers.
2015-10-27util-lib: move more locale-related calls to locale-util.[ch]Lennart Poettering
2015-10-27util-lib: move more file I/O related calls into fileio.[ch]Lennart Poettering
2015-10-27util-lib: split out hex/dec/oct encoding/decoding into its own fileLennart Poettering
2015-10-27util-lib: split string parsing related calls from util.[ch] into parse-util.[ch]Lennart Poettering
2015-10-26util-lib: split out user/group/uid/gid calls into user-util.[ch]Lennart Poettering
2015-10-25util-lib: split out fd-related operations into fd-util.[ch]Lennart Poettering
There are more than enough to deserve their own .c file, hence move them over.
2015-10-24util-lib: split our string related calls from util.[ch] into its own file ↵Lennart Poettering
string-util.[ch] There are more than enough calls doing string manipulations to deserve its own files, hence do something about it. This patch also sorts the #include blocks of all files that needed to be updated, according to the sorting suggestions from CODING_STYLE. Since pretty much every file needs our string manipulation functions this effectively means that most files have sorted #include blocks now. Also touches a few unrelated include files.
2015-10-24util: split out escaping code into escape.[ch]Lennart Poettering
This really deserves its own file, given how much code this is now.
2015-10-17sd-bus: fix error handling of pthread API callsLennart Poettering
pthread APIs (unlike the rest of libc) return their errors as positive error codes directly from the functions, rather than using errno. Let's make sure we always handle things that way.
2015-10-05hashmap: hash_funcs - make inputs unambiguousTom Gundersen
Make sure all variable-length inputs are properly terminated or that their length is encoded in some way. This avoids ambiguity of adjacent inputs. E.g., in case of a hash function taking two strings, compressing "ab" followed by "c" is now distinct from "a" followed by "bc".
2015-10-05hashmap: refactor hash_funcTom Gundersen
All our hash functions are based on siphash24(), factor out siphash_init() and siphash24_finalize() and pass the siphash state to the hash functions rather than the hash key. This simplifies the hash functions, and in particular makes composition simpler as calling siphash24_compress() repeatedly on separate chunks of input has the same effect as first concatenating the input and then calling siphash23_compress() on the result.
2015-09-29util: introduce common version() implementation and use it everywhereLennart Poettering
This also allows us to drop build.h from a ton of files, hence do so. Since we touched the #includes of those files, let's order them properly according to CODING_STYLE.
2015-09-29tree-wide: port more code to use send_one_fd() and receive_one_fd()Lennart Poettering
Also, make it slightly more powerful, by accepting a flags argument, and make it safe for handling if more than one cmsg attribute happens to be attached.
2015-09-27sd-bus: va_start should use the last named parameterThomas Hindoe Paaboel Andersen
2015-09-26sd-bus: add sd_bus_path_{encode,decode}_many()David Herrmann
This introduces two new helpers alongside sd_bus_path_{encode,decode}(), which work similarly to their counterparts, but accept a format-string as input. This allows encoding and decoding multiple labels of a format string at the same time.
2015-09-23busctl: also monitor messages to SERVICE argumentsLars Uebernickel
Add a 'destination' match rule for every SERVICE argument in addition to the 'sender' rule. This is consistent with busctl(1), which documents monitor as dumping "messages to or from this peer".