| Age | Commit message (Collapse) | Author |
|---|
|
This is useful for alternative network management solutions (such as NetworkManager) to push DNS configuration data
into resolved.
The calls will fail should networkd already have taken possesion of a link, so that the bus API is only available if
we don't get the data from networkd.
|
|
These were previously forgotten, add them now.
|
|
Setting of dst_id was based on interplay of two booleans,
making the logic hard to follow (for humans and compilers alike).
gcc was confused and emmitted a warning about an uninitialized
variable. Rework the code to make it obvious that dst_id is
set properly.
|
|
|
|
Go over the entries in the map and check that they make sense.
Tests are added. In the future we might want to do additional
checks, e.g. verifying that the error names are in the expected
format.
|
|
errno_from_name used an unusual return convention where 0 meant
"not found". This tripped up config_parse_syscall_errno(),
which would treat that as success. Return -EINVAL instead,
and adjust bus_error_name_to_errno() for the new convention.
Also remove a goto which was used as a simple if and clean
up surroudning code a bit.
|
|
Also add a coccinelle receipt to help with such transitions.
|
|
supporting them
If we already degraded the feature level below DO don't bother with sending requests for DS, DNSKEY, RRSIG, NSEC, NSEC3
or NSEC3PARAM RRs. After all, we cannot do DNSSEC validation then anyway, and we better not press a legacy server like
this with such modern concepts.
This also has the benefit that when we try to validate a response we received using DNSSEC, and we detect a limited
server support level while doing so, all further auxiliary DNSSEC queries will fail right-away.
|
|
Fixes:
$ make valgrind-tests TESTS=test-bus-cleanup
==6363== 9 bytes in 1 blocks are possibly lost in loss record 1 of 28
==6363== at 0x4C2BBCF: malloc (vg_replace_malloc.c:299)
==6363== by 0x197D12: hexmem (hexdecoct.c:79)
==6363== by 0x183083: bus_socket_start_auth_client (bus-socket.c:639)
==6363== by 0x1832A0: bus_socket_start_auth (bus-socket.c:678)
==6363== by 0x183438: bus_socket_connect (bus-socket.c:705)
==6363== by 0x14B0F2: bus_start_address (sd-bus.c:1053)
==6363== by 0x14B592: sd_bus_start (sd-bus.c:1134)
==6363== by 0x14B95E: sd_bus_open_system (sd-bus.c:1235)
==6363== by 0x1127E2: test_bus_open (test-bus-cleanup.c:42)
==6363== by 0x112AAE: main (test-bus-cleanup.c:87)
==6363==
...
$ ./libtool --mode=execute valgrind ./test-bus-cleanup
==6584== LEAK SUMMARY:
...
==6584== possibly lost: 10,566 bytes in 27 blocks
|
|
Since we honour RFC5011 revoked keys it might happen we end up with an
empty trust anchor, or one where there's no entry for the root left.
With this patch the logic is changed what to do in this case.
Before this patch we'd end up requesting the root DS, which returns with
NODATA but a signed NSEC we cannot verify, since the trust anchor is
empty after all. Thus we'd return a DNSSEC result of "missing-key", as
we lack a verified version of the key.
With this patch in place, look-ups for the root DS are explicitly
recognized, and not passed on to the DNS servers. Instead, if
downgrade-ok mode is on an unsigned NODATA response is synthesized, so
that the validator code continues under the assumption the root zone was
unsigned. If downgrade-ok mode is off a new transaction failure is
generated, that makes this case recognizable.
|
|
|
|
Ninth DNSSEC patch set
|
|
|
|
This was missing when the error type was added in
ac720200b7e5b80cc4985087e38f3452e5b3b080.
|
|
EIO is really too generic, and indicates transmission problems.
|
|
Fixes:
```
$ ./configure ... --enable-dbus
$ make
$ make valgrind-tests TESTS=test-bus-marshal
...
==25301== 51 bytes in 1 blocks are definitely lost in loss record 7 of 18
==25301== at 0x4C2DD9F: realloc (in /usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so)
==25301== by 0x5496B8C: ??? (in /lib/x86_64-linux-gnu/libdbus-1.so.3.14.3)
==25301== by 0x54973E3: _dbus_string_append_printf_valist (in /lib/x86_64-linux-gnu/libdbus-1.so.3.14.3)
==25301== by 0x547E5C2: _dbus_set_error_valist (in /lib/x86_64-linux-gnu/libdbus-1.so.3.14.3)
==25301== by 0x547E73E: dbus_set_error (in /lib/x86_64-linux-gnu/libdbus-1.so.3.14.3)
==25301== by 0x548969A: dbus_message_demarshal (in /lib/x86_64-linux-gnu/libdbus-1.so.3.14.3)
==25301== by 0x115C1A: main (test-bus-marshal.c:244)
==25301==
```
|
|
via TCP
Previously, if we couldn't reach a server via UDP we'd generate an
MAX_ATTEMPTS transaction result, but if we couldn't reach it via TCP
we'd generate a RESOURCES transaction result. While it is OK to generate
two different errors I think, "RESOURCES" is certainly a misnomer.
Introduce a new transaction result "CONNECTION_FAILURE" instead.
|
|
We need to check the same thing in multiple tests. Use a shared
macro to make it easier to update the list of errnos.
Change the errno code for "unitialized cgroup fs" for ENOMEDIUM.
Exec format error looks like something more serious.
This fixes test-execute invocation in mock.
|
|
Let's distuingish the cases where our code takes an active role in
selinux management, or just passively reports whatever selinux
properties are set.
mac_selinux_have() now checks whether selinux is around for the passive
stuff, and mac_selinux_use() for the active stuff. The latter checks the
former, plus also checks UID == 0, under the assumption that only when
we run priviliged selinux management really makes sense.
Fixes: #1941
|
|
GLIB has recently started to officially support the gcc cleanup
attribute in its public API, hence let's do the same for our APIs.
With this patch we'll define an xyz_unrefp() call for each public
xyz_unref() call, to make it easy to use inside a
__attribute__((cleanup())) expression. Then, all code is ported over to
make use of this.
The new calls are also documented in the man pages, with examples how to
use them (well, I only added docs where the _unref() call itself already
had docs, and the examples, only cover sd_bus_unrefp() and
sd_event_unrefp()).
This also renames sd_lldp_free() to sd_lldp_unref(), since that's how we
tend to call our destructors these days.
Note that this defines no public macro that wraps gcc's attribute and
makes it easier to use. While I think it's our duty in the library to
make our stuff easy to use, I figure it's not our duty to make gcc's own
features easy to use on its own. Most likely, client code which wants to
make use of this should define its own:
#define _cleanup_(function) __attribute__((cleanup(function)))
Or similar, to make the gcc feature easier to use.
Making this logic public has the benefit that we can remove three header
files whose only purpose was to define these functions internally.
See #2008.
|
|
This is a continuation of the previous include sort patch, which
only sorted for .c files.
|
|
siphash24: let siphash24_finalize() and siphash24() return the result…
|
|
Rather than passing a pointer to return the result, return it directly
from the function calls.
Also, return the result in native endianess, and let the callers care
about the conversion. For hash tables and bloom filters, we don't care,
but in order to keep MAC addresses and DHCP client IDs stable, we
explicitly convert to LE.
|
|
Sort the includes accoding to the new coding style.
|
|
Add a few includes that we rely on to be include already.
|
|
Change the "out" parameter from uint8_t[8] to uint64_t. On architectures which
enforce pointer alignment this fixes crashes when we previously cast an
unaligned array to uint64_t*, and on others this should at least improve
performance as the compiler now aligns these properly.
This also simplifies the code in most cases by getting rid of typecasts. The
only place which we can't change is struct duid's en.id, as that is _packed_
and public API, so we can't enforce alignment of the "id" field and have to
use memcpy instead.
|
|
actually enabled
Otherwise we might end up mistaking a SMACK label for an selinux label.
Also, fixes unexpect debug messages:
http://lists.freedesktop.org/archives/systemd-devel/2015-November/034913.html
|
|
|
|
|
|
|
|
|
|
|
|
capability-util.[ch]
The files are named too generically, so that they might conflict with
the upstream project headers. Hence, let's add a "-util" suffix, to
clarify that this are just our utility headers and not any official
upstream headers.
|
|
|
|
|
|
|
|
|
|
|
|
There are more than enough to deserve their own .c file, hence move them
over.
|
|
string-util.[ch]
There are more than enough calls doing string manipulations to deserve
its own files, hence do something about it.
This patch also sorts the #include blocks of all files that needed to be
updated, according to the sorting suggestions from CODING_STYLE. Since
pretty much every file needs our string manipulation functions this
effectively means that most files have sorted #include blocks now.
Also touches a few unrelated include files.
|
|
This really deserves its own file, given how much code this is now.
|
|
pthread APIs (unlike the rest of libc) return their errors as positive
error codes directly from the functions, rather than using errno. Let's
make sure we always handle things that way.
|
|
Make sure all variable-length inputs are properly terminated or that
their length is encoded in some way. This avoids ambiguity of
adjacent inputs.
E.g., in case of a hash function taking two strings, compressing "ab"
followed by "c" is now distinct from "a" followed by "bc".
|
|
All our hash functions are based on siphash24(), factor out
siphash_init() and siphash24_finalize() and pass the siphash
state to the hash functions rather than the hash key.
This simplifies the hash functions, and in particular makes
composition simpler as calling siphash24_compress() repeatedly
on separate chunks of input has the same effect as first
concatenating the input and then calling siphash23_compress()
on the result.
|
|
This also allows us to drop build.h from a ton of files, hence do so.
Since we touched the #includes of those files, let's order them properly
according to CODING_STYLE.
|
|
Also, make it slightly more powerful, by accepting a flags argument, and
make it safe for handling if more than one cmsg attribute happens to be
attached.
|
|
|
|
This introduces two new helpers alongside sd_bus_path_{encode,decode}(),
which work similarly to their counterparts, but accept a format-string as
input. This allows encoding and decoding multiple labels of a format
string at the same time.
|
|
Add a 'destination' match rule for every SERVICE argument in addition to
the 'sender' rule. This is consistent with busctl(1), which documents
monitor as dumping "messages to or from this peer".
|
|
sd-bus: introduce new sd_bus_default_flush_close() call
|
