| Age | Commit message (Collapse) | Author |
|---|
|
The kdbus limit is 2M and we removed the bus-owner override. Therefore,
use at most 2M as message size.
|
|
|
|
Move the +1 calculus onto the definition of the variable, just to make
the code a little easier to read. No functional change.
|
|
strerror_r does not return null here and even if it did we would have
problems already at the preceding strlen call.
Found by coverity. Fixes: CID#1237770
|
|
|
|
Just a rename of two struct members to make the header file c++ compatible.
|
|
The kdbus logic name registry logic was changed to transport the actual
name to acquire, release or report in a kdbus item.
This brings the name API a little more in line with other calls, and allows
for later augmentation.
Follow that change on the systemd side.
|
|
All kdbus ioctl arguments must be 8byte aligned. Make sure we use
alloca_align() and _alignas_(8) in all situations where gcc doesn't
guarantee 8-byte alignment.
Note that objects on the stack are always 8byte aligned as we put
_alignas_(8) into the structure definition in kdbus.h.
|
|
We always use "int" if we retrieve boolean values from sd-bus, as "bool"
is only a single byte, but full int on va-args.
Thanks to Werner Fink for the report!
|
|
(no API/ABI break this time)
|
|
|
|
If we call into user callbacks, we must always propagate possible errors.
Fix bus_node_exists() to do that and adjust the callers (which already
partially propagated the error).
Also speed up that function by first checking for registered enumerators
and/or object-managers.
|
|
The dbus-spec clearly specifies that GetManagedObjects() should only work
on the root-path of an object-tree. But on that path, it works regardless
whether there are any objects available or not.
We could, technically, define all sub-paths as a root-path of its own
sub-tree. However, if we do that, we enter undefined territory:
Imagine only a fallback vtable is registered. We want
GetManagedObjects() to *NOT* fail with UNKNOWN_METHOD if it is called
on a valid sub-tree of the fallback. On the other hand, we don't want
it to work on arbitrary sub-tree. Something like:
/path/to/fallback/foobar/foobar/foobar/invalid/foobar
should not work.
However, there is no way to know which paths on a fallback are valid
without looking at there registered objects. If no objects are
registered, we have no way to figure it out.
Therefore, we now try to follow the dbus spec by only returning valid data
on registered root-paths. We treat each path as root which was registered
an object-manager on via add_object_manager(). So applications can now
directly control which paths to place an object-manager on.
We also fix the introspection to not return object-manager interfaces on
non-root paths.
Also fixes some dead-code paths initially reported by Philippe De Swert.
|
|
sd_bus_message_get_errno can currently return either a number of
different poitive errno values (from bus-error-mapping), or a negative
EINVAL if passed null as parameter.
The check for null parameter was introduced in 40ca29a1370379d43e44c0ed425eecc7218dcbca
at the same as the function was renamed from bus_message_to_errno and
made public API. Before becoming public the function used to return
only negative values.
It is weird to have a function return both positive and negative errno
and it generally looks like a mistake. The function is guarded by the
--enable-kdbus flags so I wonder if we still have time to fix it up?
It does not have any documentation yet. However, except for a few details
it is just a convenient way to call sd_bus_error_get_errno which is documented
to return only positive errno.
This patch makes it return only positive errno and fixes up the two
calls to the function that tried to cope with both positive and negative
values.
|
|
Do not assume hashmap iterators are pointers.
They may be structs in an alternative hashmap implementation.
|
|
It is redundant to store 'hash' and 'compare' function pointers in
struct Hashmap separately. The functions always comprise a pair.
Store a single pointer to struct hash_ops instead.
systemd keeps hundreds of hashmaps, so this saves a little bit of
memory.
|
|
Actually unref the buscreds when we are not going to return a
pointer to them. As when bus_creds_add_more fails we immediately
return the error code otherwise and leak the new buscreds.
Found with coverity. Fixes: CID#1237761
|
|
m->kdbus could be freed before it is released. Changing the
order fixes the issue.
Found with Coverity. Fixes: CID#1237798
|
|
Custom endpoints are alternative connection points to a bus, allowing
specific policy to be uploaded.
Add two functions to bus-kernel. One to create such endpoints, and another
one for setting a policy for them.
|
|
In order to re-use the policy definitions, factor them out into their own
files.
|
|
|
|
This should help in debugging failing event sources.
|
|
Skipping interfaces randomly without the caller specifying it is nasty.
Avoid this and let the caller do that themselves.
|
|
We must not access slot->floating after we possible dropped the last
reference to it. Fix all callback-invocations to first check
slot->floating and possible disconnect the slot, then release the last
reference.
|
|
The bus_map_all_properties() helper calls
org.freedesktop.DBus.Properties.GetAll() on a given target and parses the
result according to a given property-table. This simplifies dealing with
DBus.Properties significantly. However, the function is blocking and thus
not really useful in many situations.
This patch extracts the core of this function and adds two new helpers
which directly take dbus-messages as arguments. This way, you can issue
asynchronous requests and parse the result via these helpers:
bus_message_map_all_properties():
This is the same as bus_map_all_properties() but takes the result
message from a GetAll() request as argument. You can thus issue an
asynchronous GetAll() request and then use this helper once you got
the result.
bus_message_map_properties_changed():
This function takes a signal-message that was retrieved via a
PropertiesChanged signal and then parses it like if you retrieved
it via GetAll(). Furthermore, this function returns the number of
matched properties that got invalidated by the PropertiesChanged
signal, but didn't carry the new value. This way, the caller can
issue a new GetAll() request and then parse the result.
The old function bus_map_all_properties() is functionally unchanged, but
now uses bus_message_map_all_properties() internally.
|
|
https://bugs.freedesktop.org/show_bug.cgi?id=83097
|
|
Noticed by Djalal Harouni
|
|
STOPPING=1 via sd_notify()
This should fix a race where a service thatis idle drops its name, and
is immediately requested by another client, which causes dbus-daemon to
ask systemd to activate it again, but since systemd still assumes it is
running it won't do anything.
|
|
|
|
Now, that the memfd stuff is not exported anymore, we can simplify a few
things:
Use assert() instead of assert_return(), since this is used internally
only, and we should be less permissive then.
No need to pass an allocated fd back by call-by-reference, we can just
directly return it.
|
|
Mapping files as MAP_SHARED is handled by the kernel as 'writable'
mapping. Always! Even with PROT_READ. Reason for that is,
mprotect(PROT_WRITE) could change the mapping underneath and currently
there is no kernel infrastructure to add protection there. This might
change in the future, but until then, map sealed files as MAP_PRIVATE so
we don't get EPERM.
|
|
On systems without properly setup systemd, cg_get_root_path returns
-ENOENT. This means that busctl doesn't display much information.
busctl monitor also fails whenever it intercepts messages.
This fix fakes creates a fake "/" root cgroup which lets busctl work
on such systems.
|
|
|
|
First, let's drop the "bus" argument, we can determine it from the
message anyway.
Secondly, determine the right callback/userdata pair automatically from
what is currently is being dispatched. This should simplify things a lot
for us, since it makes it unnecessary to pass pointers through the
original handlers through all functions when we process messages, which
might require authentication.
|
|
|
|
Remove the sd_ prefix from internal functions and get rid of the sd_memfd
type. As a memfd is now just a native file descriptor, we can get rid of our
own wrapper type, and also use close() and dup() on them directly.
|
|
Unlike earlier versions, the syscall only takes 2 arguments in its
final version, not 3.
|
|
Don't expose generic kernel API via libsystemd, but keep the code internal
for our own usage.
|
|
|
|
|
|
|
|
This is a generalization of the vtable privilege check we already have,
but exported, and hence useful when preparing for a polkit change.
This will deal with the complexity that on dbus1 one cannot trust the
capability field we retrieve via the bus, since it is read via
/proc/$$/stat (and thus might be out-of-date) rather than directly from
the message (like on kdbus) or bus connection (as for uid creds on
dbus1).
Also, port over all code to this new API.
|
|
It's unneccessary, not used, and complicates callers of the
function.
|
|
i is being used incorrectly. It is used to refer to the number of
indexes calculated so far (out of k). However, it is also incremented
when a new hash key is being used. This means that the results are
inconsistent with the desired behavior described in PORTING-DBUS1
document.
The expected result is that for the default values of m and k (512, 8)
the 1st hash key should produce 4 indexes. The second hash key is used
for the next 4 and overall 8 indexes into m are calculated.
The current behavior results in 6 indexes being calculated, 4 coming
from hash key 1 and 2 others from hash key 5.
|
|
In the long run this should become a full fledged client to networkd
(but not before networkd learns bus support). For now, just pull
interesting data out of networkd, udev, and rtnl and present it to the
user, in a simple but useful output.
|
|
|
|
Since b5eca3a2059f9399d1dc52cbcf9698674c4b1cf0 we don't attempt to GC
busses anymore when unsent messages remain that keep their reference,
when they otherwise are not referenced anymore. This means that if we
explicitly want connections to go away, we need to close them.
With this change we will no do so explicitly wherver we connect to the
bus from a main program (and thus know when the bus connection should go
away), or when we create a private bus connection, that really should go
away after our use.
This fixes connection leaks in the NSS and PAM modules.
|
|
getopt is usually good at printing out a nice error message when
commandline options are invalid. It distinguishes between an unknown
option and a known option with a missing arg. It is better to let it
do its job and not use opterr=0 unless we actually want to suppress
messages. So remove opterr=0 in the few places where it wasn't really
useful.
When an error in options is encountered, we should not print a lengthy
help() and overwhelm the user, when we know precisely what is wrong
with the commandline. In addition, since help() prints to stdout, it
should not be used except when requested with -h or --help.
Also, simplify things here and there.
|
|
|
|
|
