| Age | Commit message (Collapse) | Author |
|---|
|
remove bus-proxyd
|
|
Previously we'd miss a necessary whitespace at the end of arrays, if more data
was following.
|
|
|
|
Better support of OPENPGPKEY, CAA, TLSA packets and tests
|
|
As kdbus won't land in the anticipated way, the bus-proxy is not needed in
its current form. It can be resurrected at any time thanks to the history,
but for now, let's remove it from the sources. If we'll have a similar tool
in the future, it will look quite differently anyway.
Note that stdio-bridge is still available. It was restored from a version
prior to f252ff17, and refactored to make use of the current APIs.
|
|
This feature will not be used anytime soon, so remove a bit of cruft.
The BusPolicy= config directive will stay around as compat noop.
|
|
ISO/IEC 9899:1999 §7.21.1/2 says:
Where an argument declared as size_t n specifies the length of the array
for a function, n can have the value zero on a call to that
function. Unless explicitly stated otherwise in the description of a
particular function in this subclause, pointer arguments on such a call
shall still have valid values, as described in 7.1.4.
In base64_append_width memcpy was called as memcpy(x, NULL, 0). GCC 4.9
started making use of this and assumes This worked fine under -O0, but
does something strange under -O3.
This patch fixes a bug in base64_append_width(), fixes a possible bug in
journal_file_append_entry_internal(), and makes use of the new function
to simplify the code in other places.
|
|
This should be handled fine now by .dir-locals.el, so need to carry that
stuff in every file.
|
|
This commit changes the mapping of the BUS_ERROR_UNIT_MASKED error to ESHUTDOWN. This error is used whenever the
transaction engine is asked to operate on a masked unit. ESHUTDOWN is what is used for the similar case when the unit
file enable/disable logic hits a masked unit file, hence is a natural candidate to be used here too.
Background: before this patch both "job type not applicable" and "unit masked" where mapped to EBADR, which
transaction_add_job_and_dependencies() then checked for. It actually wanted to check exclusively for the former error
condition, not the latter but due to the same mapping this failed to work.
This patch semi-undoes an accidental change made in caffa4ef700fdd0eadd6c0b2ef9925611672a1bc, however restores the
error number to ESHUTDOWN instead of the original ENOSYS (for the reasons indicated above).
To make this easier to grok for the future, I added comments to explaining which error conditions are checked for.
Fixes: #2315
|
|
the network is down
|
|
This is useful for alternative network management solutions (such as NetworkManager) to push DNS configuration data
into resolved.
The calls will fail should networkd already have taken possesion of a link, so that the bus API is only available if
we don't get the data from networkd.
|
|
These were previously forgotten, add them now.
|
|
Setting of dst_id was based on interplay of two booleans,
making the logic hard to follow (for humans and compilers alike).
gcc was confused and emmitted a warning about an uninitialized
variable. Rework the code to make it obvious that dst_id is
set properly.
|
|
|
|
Go over the entries in the map and check that they make sense.
Tests are added. In the future we might want to do additional
checks, e.g. verifying that the error names are in the expected
format.
|
|
errno_from_name used an unusual return convention where 0 meant
"not found". This tripped up config_parse_syscall_errno(),
which would treat that as success. Return -EINVAL instead,
and adjust bus_error_name_to_errno() for the new convention.
Also remove a goto which was used as a simple if and clean
up surroudning code a bit.
|
|
Also add a coccinelle receipt to help with such transitions.
|
|
supporting them
If we already degraded the feature level below DO don't bother with sending requests for DS, DNSKEY, RRSIG, NSEC, NSEC3
or NSEC3PARAM RRs. After all, we cannot do DNSSEC validation then anyway, and we better not press a legacy server like
this with such modern concepts.
This also has the benefit that when we try to validate a response we received using DNSSEC, and we detect a limited
server support level while doing so, all further auxiliary DNSSEC queries will fail right-away.
|
|
Fixes:
$ make valgrind-tests TESTS=test-bus-cleanup
==6363== 9 bytes in 1 blocks are possibly lost in loss record 1 of 28
==6363== at 0x4C2BBCF: malloc (vg_replace_malloc.c:299)
==6363== by 0x197D12: hexmem (hexdecoct.c:79)
==6363== by 0x183083: bus_socket_start_auth_client (bus-socket.c:639)
==6363== by 0x1832A0: bus_socket_start_auth (bus-socket.c:678)
==6363== by 0x183438: bus_socket_connect (bus-socket.c:705)
==6363== by 0x14B0F2: bus_start_address (sd-bus.c:1053)
==6363== by 0x14B592: sd_bus_start (sd-bus.c:1134)
==6363== by 0x14B95E: sd_bus_open_system (sd-bus.c:1235)
==6363== by 0x1127E2: test_bus_open (test-bus-cleanup.c:42)
==6363== by 0x112AAE: main (test-bus-cleanup.c:87)
==6363==
...
$ ./libtool --mode=execute valgrind ./test-bus-cleanup
==6584== LEAK SUMMARY:
...
==6584== possibly lost: 10,566 bytes in 27 blocks
|
|
Since we honour RFC5011 revoked keys it might happen we end up with an
empty trust anchor, or one where there's no entry for the root left.
With this patch the logic is changed what to do in this case.
Before this patch we'd end up requesting the root DS, which returns with
NODATA but a signed NSEC we cannot verify, since the trust anchor is
empty after all. Thus we'd return a DNSSEC result of "missing-key", as
we lack a verified version of the key.
With this patch in place, look-ups for the root DS are explicitly
recognized, and not passed on to the DNS servers. Instead, if
downgrade-ok mode is on an unsigned NODATA response is synthesized, so
that the validator code continues under the assumption the root zone was
unsigned. If downgrade-ok mode is off a new transaction failure is
generated, that makes this case recognizable.
|
|
|
|
Ninth DNSSEC patch set
|
|
|
|
This was missing when the error type was added in
ac720200b7e5b80cc4985087e38f3452e5b3b080.
|
|
EIO is really too generic, and indicates transmission problems.
|
|
Fixes:
```
$ ./configure ... --enable-dbus
$ make
$ make valgrind-tests TESTS=test-bus-marshal
...
==25301== 51 bytes in 1 blocks are definitely lost in loss record 7 of 18
==25301== at 0x4C2DD9F: realloc (in /usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so)
==25301== by 0x5496B8C: ??? (in /lib/x86_64-linux-gnu/libdbus-1.so.3.14.3)
==25301== by 0x54973E3: _dbus_string_append_printf_valist (in /lib/x86_64-linux-gnu/libdbus-1.so.3.14.3)
==25301== by 0x547E5C2: _dbus_set_error_valist (in /lib/x86_64-linux-gnu/libdbus-1.so.3.14.3)
==25301== by 0x547E73E: dbus_set_error (in /lib/x86_64-linux-gnu/libdbus-1.so.3.14.3)
==25301== by 0x548969A: dbus_message_demarshal (in /lib/x86_64-linux-gnu/libdbus-1.so.3.14.3)
==25301== by 0x115C1A: main (test-bus-marshal.c:244)
==25301==
```
|
|
via TCP
Previously, if we couldn't reach a server via UDP we'd generate an
MAX_ATTEMPTS transaction result, but if we couldn't reach it via TCP
we'd generate a RESOURCES transaction result. While it is OK to generate
two different errors I think, "RESOURCES" is certainly a misnomer.
Introduce a new transaction result "CONNECTION_FAILURE" instead.
|
|
We need to check the same thing in multiple tests. Use a shared
macro to make it easier to update the list of errnos.
Change the errno code for "unitialized cgroup fs" for ENOMEDIUM.
Exec format error looks like something more serious.
This fixes test-execute invocation in mock.
|
|
Let's distuingish the cases where our code takes an active role in
selinux management, or just passively reports whatever selinux
properties are set.
mac_selinux_have() now checks whether selinux is around for the passive
stuff, and mac_selinux_use() for the active stuff. The latter checks the
former, plus also checks UID == 0, under the assumption that only when
we run priviliged selinux management really makes sense.
Fixes: #1941
|
|
GLIB has recently started to officially support the gcc cleanup
attribute in its public API, hence let's do the same for our APIs.
With this patch we'll define an xyz_unrefp() call for each public
xyz_unref() call, to make it easy to use inside a
__attribute__((cleanup())) expression. Then, all code is ported over to
make use of this.
The new calls are also documented in the man pages, with examples how to
use them (well, I only added docs where the _unref() call itself already
had docs, and the examples, only cover sd_bus_unrefp() and
sd_event_unrefp()).
This also renames sd_lldp_free() to sd_lldp_unref(), since that's how we
tend to call our destructors these days.
Note that this defines no public macro that wraps gcc's attribute and
makes it easier to use. While I think it's our duty in the library to
make our stuff easy to use, I figure it's not our duty to make gcc's own
features easy to use on its own. Most likely, client code which wants to
make use of this should define its own:
#define _cleanup_(function) __attribute__((cleanup(function)))
Or similar, to make the gcc feature easier to use.
Making this logic public has the benefit that we can remove three header
files whose only purpose was to define these functions internally.
See #2008.
|
|
This is a continuation of the previous include sort patch, which
only sorted for .c files.
|
|
siphash24: let siphash24_finalize() and siphash24() return the result…
|
|
Rather than passing a pointer to return the result, return it directly
from the function calls.
Also, return the result in native endianess, and let the callers care
about the conversion. For hash tables and bloom filters, we don't care,
but in order to keep MAC addresses and DHCP client IDs stable, we
explicitly convert to LE.
|
|
Sort the includes accoding to the new coding style.
|
|
Add a few includes that we rely on to be include already.
|
|
Change the "out" parameter from uint8_t[8] to uint64_t. On architectures which
enforce pointer alignment this fixes crashes when we previously cast an
unaligned array to uint64_t*, and on others this should at least improve
performance as the compiler now aligns these properly.
This also simplifies the code in most cases by getting rid of typecasts. The
only place which we can't change is struct duid's en.id, as that is _packed_
and public API, so we can't enforce alignment of the "id" field and have to
use memcpy instead.
|
|
actually enabled
Otherwise we might end up mistaking a SMACK label for an selinux label.
Also, fixes unexpect debug messages:
http://lists.freedesktop.org/archives/systemd-devel/2015-November/034913.html
|
|
|
|
|
|
|
|
|
|
|
|
capability-util.[ch]
The files are named too generically, so that they might conflict with
the upstream project headers. Hence, let's add a "-util" suffix, to
clarify that this are just our utility headers and not any official
upstream headers.
|
|
|
|
|
|
|
|
|
|
|
|
There are more than enough to deserve their own .c file, hence move them
over.
|
|
string-util.[ch]
There are more than enough calls doing string manipulations to deserve
its own files, hence do something about it.
This patch also sorts the #include blocks of all files that needed to be
updated, according to the sorting suggestions from CODING_STYLE. Since
pretty much every file needs our string manipulation functions this
effectively means that most files have sorted #include blocks now.
Also touches a few unrelated include files.
|
