| Age | Commit message (Collapse) | Author |
|---|
|
|
|
|
|
ENOSYS is used to signify compiled-out functionality. Using it for
different kinds of error is misleading.
For BUS_ERROR_SLEEP_VERB_NOT_SUPPORTED, logind-action.c uses ENOTSUP
already, so changing it to ENOTSUP makes the dbus and action paths
behave the same.
|
|
This implements two new helpers, discussed on systemd-devel about 1 year
ago:
sd_bus_emit_object_added()
sd_bus_emit_object_removed()
Both calls are equivalent to their respective counterpart
sd_bus_emit_interfaces_{added/removed}(), but can figure out the list of
interfaces themselves, instead of requiring the caller to provide them.
Furthermore, both calls properly deal with builtin interfaces provided via
org.freedesktop.DBus.* and alike.
Both calls simply traverse a node and all its parent nodes to figure out a
list of all interfaces registered as vtable or fallback. It then appends
each of them, similar to the interfaces_{added/removed}() helpers.
Note that interfaces_{added/removed}() runs a parent traversal for *each*
passed interface. Therefore, it can simply bail out, once it found a
parent node that implements a given interface.
With object_{added/removed}() we cannot know the registered interfaces in
advance, thus, we cannot run one traversal per node. Instead, we run a
single traversal and remember all interfaces that we added. Therefore, a
child-interface overrides all conflicting parent-interfaces. We keep a
"Set *s" context to track those while climbing up the tree.
|
|
The kernel provides capabilities as a u32 array, sd-bus uses an u8 array.
This works fine on little-endian as both are encoded the same way.
However, this fails on big-endian if we do not perform sufficient
byte-swapping on each u32 entry.
This patch makes sd-bus use u32, too. We avoid changing any kernel
provided data so we can keep pointing into kdbus pool buffers which
contain u32 arrays.
|
|
The number of available caps can be read from
/proc/sys/kernel/cap_last_cap during runtime. Our helper cap_last_cap()
does that, so there's no reason to remember the size of any capability
cache. We can just pre-allocate arrays with a suitable size for all
available caps and reject any higher caps.
The kernel capability API uses u32 as base so make sure we do the same.
Note that this is specified by POSIX, so it's unlikely to change.
|
|
systemd-nspawn for containers
This is basically just a shortcut for "systemctl enable
systemd-nspawn@<foobar>.service", but does escaping.
|
|
|
|
Drop spurious 'we'.
|
|
|
|
They do not use any functions from libcap directly. The CAP_SYS_ADMIN constant
in use by bus-objects.c comes from <linux/capability.h> imported through
"missing.h". The "missing.h" header is imported through "util.h" which gets
imported in "bus-util.h".
Tested that everything builds cleanly after this change.
|
|
Pretty much everywhere else we use the generic term "machine" when
referring to containers in API, so let's do though in sd-bus too. In
particular, since the concept of a "container" exists in sd-bus too, but
as part of the marshalling system.
|
|
|
|
a PID instead of a container name
|
|
files from core
Stuff in src/shared or src/libsystemd should *never* include code from
src/core or any of the tools, so don't do that here either. It's not OK!
|
|
Kernel notifications carry a timestamp now, so make sure
bus_kernel_translate_message() doesn't complain when it stumbles across
them.
|
|
Sync kdbus.h with upstream changes:
* Two optional cancellation points where added for synchronously
blocking KDBUS_CMD_SEND commands: A sigmask to change the mask
of accepted signals before the task is put to sleep, and a
generic file descriptor that can be written to, in order to cancel
the command. Both methods are currently unused.
* The KDBUS_CMD_CANCEL ioctl was removed. sd-bus was never using
that command, so there's no change needed.
* Some kerneldoc fixes
|
|
|
|
Make sure to set send-attach-flags on BUS_MAKE. These control which
information is revealed about the bus-owner.
|
|
Make sure we don't call into any bus_kernel_*() functions before
b->is_kernel is set to true. Hard-code the CMD_FREE just like the other
helpers do.
|
|
Changes:
* bloom parameters are returned in an offset via HELLO
* FREE now takes items just like any other ioctl
|
|
|
|
Sync up with recent kdbus changed:
* several ioctls gained .size and .items members (but still unused)
* CMD_SEND gained its own ioctl structure
* several members of kdbus_msg were dropped as they were only used during
SEND, not during RECV etc.
* CMD_RECV and CMD_SEND now share a kdbus_reply member which contains the
offset and size of the returned message.
|
|
Make sure the whole cmd_free object is zeroed before passing it into the
kernel. This makes valgrind happy and makes us future proof.
|
|
We must restore part->mmap_begin when poping memfds from the memfd-cache.
We rely on the memfds to be unsealed, so we can be sure that we own the
whole FD. Therefore, simply set part->mmap_begin to the same as
part->data.
This fixes test-bus-kernel-benchmark.
|
|
|
|
src/libsystemd/sd-bus/bus-common-errors.h
Stuff in src/shared/ should not use stuff from src/libsystemd/ really.
|
|
kdbus is not available
|
|
This way, we can ensure we have a more complete, up-to-date list of
capabilities around, always.
|
|
Support timer options --on-active=, --on-boot=, --on-startup=,
--on-unit-active=, --on-unit-inactive=, --on-calendar=. Each options
corresponding with OnActiveSec=, OnBootSec=, OnStartupSec=,
OnUnitActiveSec=, OnUnitInactiveSec=, OnCalendar= of timer
respectively. And OnCalendar= and WakeSystem= supported by
--timer-property= option like --property= of systemd-run.
And if --unit= option and timer options are specified the command can
be omitted. In this case, systemd-run assumes the target service is
already loaded. And just try to generate transient timer unit only.
|
|
As kdbus no longer exports this, remove all traces from sd-bus too
|
|
|
|
kdbus-git gained two new features:
* memfd offsets: This allows to specify a 'start' offset in kdbus_memfd
so you can send partial memfd hunks instead of always
the full memfd
* KDBUS_HELLO_UNPRIVILEGED: If passed during HELLO, the client will be
treated as unprivileged.
|
|
connections
|
|
|
|
The ELF magic cannot work for consumers of our shard library, since they
are in a different module. Hence make all the ELF magic private, and
instead introduce a public function to register additional static
mapping table.
|
|
Implement a recent change in the kdbus pool logic:
PAYLOAD_VEC_OFF items are now referencing offsets relative to the
connection's pool, not to the item itself. Follow this change in
sd-bus.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
skip a single element of any type
|
|
Let's do this right from the beginning, to prepare ground for udev
messages that most likely want to store list of strings (for device
tags) in messages, and filter on them.
|
|
|
|
Also, update "busctl" to show this in its output.
|
|
The ID returned really doesn't identify the owner, but the bus instance,
hence fix this misnaming.
Also, update "busctl status" to show the ID in its output.
|
|
If the format string contains %m, clearly errno must have a meaningful
value, so we might as well use log_*_errno to have ERRNO= logged.
Using:
find . -name '*.[ch]' | xargs sed -r -i -e \
's/log_(debug|info|notice|warning|error|emergency)\((".*%m.*")/log_\1_errno(errno, \2/'
Plus some whitespace, linewrap, and indent adjustments.
|
|
Using:
find . -name '*.[ch]' | while read f; do perl -i.mmm -e \
'local $/;
local $_=<>;
s/(if\s*\([^\n]+\))\s*{\n(\s*)(log_[a-z_]*_errno\(\s*([->a-zA-Z_]+)\s*,[^;]+);\s*return\s+\g4;\s+}/\1\n\2return \3;/msg;
print;'
$f
done
And a couple of manual whitespace fixups.
|
