summaryrefslogtreecommitdiff
path: root/src/libsystemd/sd-event
AgeCommit message (Collapse)Author
2015-05-29util: split out signal-util.[ch] from util.[ch]Lennart Poettering
No functional changes.
2015-04-10sd-event: simplify sd_event_run()Lennart Poettering
2015-03-14sd-event: sd_event_run - only return 0 on timeoutTom Gundersen
sd_event_dispatch() returns 0 on FINISH, so let's eat that up.
2015-03-14sd-event: rename PASSIVE/PREPARED to INITIAL/ARMEDTom Gundersen
2015-03-13tree-wide: there is no ENOTSUP on linuxDavid Herrmann
Replace ENOTSUP by EOPNOTSUPP as this is what linux actually uses.
2015-03-13sd-event: fix typoZbigniew Jędrzejewski-Szmek
2015-03-04Remove the cap on epoll eventsHannes Reinecke
Currently the code will silently blank out events if there are more then 512 epoll events, causing them never to be handled at all. This patch removes the cap on the number of events for epoll_wait, thereby avoiding this issue.
2015-02-23remove unused includesThomas Hindoe Paaboel Andersen
This patch removes includes that are not used. The removals were found with include-what-you-use which checks if any of the symbols from a header is in use.
2015-02-02sd-event: treat NULL callback for timer events like sig eventsTom Gundersen
In both cases exit the event loop.
2015-01-22tests: use assert_se instead of assertRonny Chevalier
Otherwise they can be optimized away with -DNDEBUG
2014-11-28treewide: no need to negate errno for log_*_errno()Michal Schmidt
It corrrectly handles both positive and negative errno values.
2014-11-28treewide: auto-convert the simple cases to log_*_errno()Michal Schmidt
As a followup to 086891e5c1 "log: add an "error" parameter to all low-level logging calls and intrdouce log_error_errno() as log calls that take error numbers", use sed to convert the simple cases to use the new macros: find . -name '*.[ch]' | xargs sed -r -i -e \ 's/log_(debug|info|notice|warning|error|emergency)\("(.*)%s"(.*), strerror\(-([a-zA-Z_]+)\)\);/log_\1_errno(-\4, "\2%m"\3);/' Multi-line log_*() invocations are not covered. And we also should add log_unit_*_errno().
2014-11-04sd-bus,sd-event: unify error handling of object descriptionsLennart Poettering
a) When getting the description return ENXIO if none is set b) Allow setting a description to NULL c) return ECHILD on fork() like for other calls
2014-11-04sd-event: implicitly set signal event source's descriptions to the signal nameLennart Poettering
2014-11-04sd-event: rename sd_event_source_set_name() to sd_event_source_get_name()Lennart Poettering
To mirror the recent name change of the concept for sd_bus objects, follow the same logic for sd_event_source objects, too.
2014-10-08sd-event: also update signal mask when disconnecting sourcesZbigniew Jędrzejewski-Szmek
2014-10-08sd-event: be more careful when enabling/disabling signalsZbigniew Jędrzejewski-Szmek
When a child event is disabled (in order to be freed) and there is no SIGCHLD signal event, sd_event_source_set_enabled will disable SIGCHLD even if there are other child events. Also remove some unneeded signalfd updates. https://bugs.freedesktop.org/show_bug.cgi?id=84659 Based-on-a-patch-by: Hristo Venev <mustrumr97@gmail.com>
2014-10-03sd-event: check the value of received signalZbigniew Jędrzejewski-Szmek
Appease coverity report #1237775. Also rename ss to n, to make it visually different from ss.
2014-09-15hashmap: introduce hash_ops to make struct Hashmap smallerMichal Schmidt
It is redundant to store 'hash' and 'compare' function pointers in struct Hashmap separately. The functions always comprise a pair. Store a single pointer to struct hash_ops instead. systemd keeps hundreds of hashmaps, so this saves a little bit of memory.
2014-08-28sd-event: simplify sd_event_source_set_name()David Herrmann
free_and_strdup() does exactly the same as sd_event_source_set_name(), use it!
2014-08-28sd-event: use event source name rather than address in debug messagesTom Gundersen
2014-08-28sd-event: allow naming event sourcesTom Gundersen
2014-08-26sd-event: sd_event_prepare - stay in PREPARED if sd_event_wait() indicates ↵Tom Gundersen
that no sources are pending
2014-08-25sd-event: split run into prepare/wait/dispatchTom Gundersen
This will allow sd-event to be integrated into an external event loop, which in turn will allow (say) glib-based applications to use our various libraries, without manually integrating each of them (bus, rtnl, dhcp, ...). The external event-loop should integrate sd-event int he following way: Every iteration must start with a call to sd_event_prepare(), which will return 0 if no event sources are ready to be processed, a positive value if they are and a negative value on error. sd_event_prepare() may only be called following sd_event_dispatch(); a call to sd_event_wait() indicating that no sources are ready to be dispatched; or a failed call to sd_event_dispatch() or sd_event_wait(). A successful call to sd_event_prepare() indicating that no event sources are ready to be dispatched must be followed by a call to sd_event_wait(), which will return 0 if it timed out without event sources being ready to be processed, a negative value on error and a positive value otherwise. sd_event_wait() may only be called following a successful call to sd_event_prepare() indicating that no event sources are ready to be dispatched. If sd_event_wait() indicates that some events sources are ready to be dispatched, it must be followed by a call to sd_event_dispatch(). This is the only time sd_event_dispatch() may be called.
2014-08-20sd-event: add API to access epoll_fdTom Gundersen
This is a prerequisite for integrating sd-event into an external event loop.
2014-08-15sd-event: return 'r' rather than '-errno'Tom Gundersen
2014-08-15sd-event: fix missing needs_rearmTom Gundersen
2014-08-14sd-event: drop _likely_()Tom Gundersen
This is not certain to be likely. Lennart says: a frequent usecase is invoking some function regularly in intervals in such a case every single iteration we'll have to rearm
2014-08-14sd-event: do not arm timers unnecessarilyTom Gundersen
Rather than recalculating the next timeout on every loop, we only do it when something changed.
2014-07-29time-util: add and use USEC/NSEC_INFINIYKay Sievers
2014-07-24sd-event: add support for CLOCK_BOOTTIMETom Gundersen
This requires a very recent kernel (3.15), so care should be taken when using this functionality.
2014-07-11sd-event: don't require a signal event source to be enabled for the child ↵Lennart Poettering
event source to work
2014-07-11sd-event: always call epoll_ctl() on mask-updates if edge-triggeredDavid Herrmann
A call to sd_event_source_set_io_events() skipps calling into the kernel if the new event-mask matches the old one. This is safe for level-triggered sources as the kernel moves them onto the ready-list automatically if events change. However, edge-triggered sources might not be on the ready-list even though events are present. A call to sd_event_source_set_io_events() with EPOLLET set might thus be used to just move the io-source onto the ready-list so the next poll will return it again. This is very useful to avoid starvation in priority-based event queues. Imagine a read() loop on an edge-triggered fd. If we cannot read data fast enough to drain the receive queue, we might decide to skip reading for now and schedule it for later. On edge-triggered io-sources we have to make sure it's put on the ready-list so the next dispatch-round will return it again if it's still the highest priority task. We could make sd-event handle edge-triggered sources directly and allow marking them ready again. However, it's much simpler to let the kernel do that for now via EPOLL_CTL_MOD.
2014-07-10event: pull in sd-event.h from event-util.hLennart Poettering
2014-06-05sd-event: restore correct timeout behaviourLennart Poettering
2014-05-15sd-resolve: add "floating" resolve queriesLennart Poettering
Same story as for sd-bus and sd-event: allow passing NULL to store query in in which case the query is freed automatically.
2014-05-15sd-event: introduce concept of "floating" event sourcesLennart Poettering
These are the counterpart of "floating" bus slots, i.e. event sources that are bound to the lifetime of the event object itself, and thus don't require an explicit reference to be kept.
2014-05-05sd-event: allow disabling event sources when an event object is dying anywayLennart Poettering
2014-05-05sd-event: make it easy to bind signal handling to event loop exitsLennart Poettering
By passing a NULL callback provide a simple way to make event loops exit on SIGTERM and other signals.
2014-03-27silence warningsThomas Hindoe Paaboel Andersen
2014-03-25sd-event: don't accidentally turn of watchdog timer event if we determine 0Lennart Poettering
2014-03-24sd-event: initialization perturbation value right before we use itLennart Poettering
That way, we don't forget to initialize it when the watchdog is initialized before all event sources.
2014-03-24networkd: fix a couple of memory leaksLennart Poettering
2014-03-24util: replace close_pipe() with new safe_close_pair()Lennart Poettering
safe_close_pair() is more like safe_close(), except that it handles pairs of fds, and doesn't make and misleading allusion, as it works similarly well for socketpairs() as for pipe()s...
2014-03-24sd-event: rework API to support CLOCK_REALTIME_ALARM and ↵Lennart Poettering
CLOCK_BOOTTIME_ALARM, too
2014-03-18util: replace close_nointr_nofail() by a more useful safe_close()Lennart Poettering
safe_close() automatically becomes a NOP when a negative fd is passed, and returns -1 unconditionally. This makes it easy to write lines like this: fd = safe_close(fd); Which will close an fd if it is open, and reset the fd variable correctly. By making use of this new scheme we can drop a > 200 lines of code that was required to test for non-negative fds or to reset the closed fd variable afterwards.
2014-02-24Remove dead lines in various placesZbigniew Jędrzejewski-Szmek
As pointed-out by clang -Wunreachable-code. No behaviour changes.
2014-02-21event: add new kind of event source called "post"Lennart Poettering
This new event source is triggered by the dispatching of any non-post event source. It can thus be used to do clean-up or recheck work, triggered by any other event source having been executed. This is different from "defer" event source which are unconditionally triggered as long as they are enabled. A "defer" event source that does nothing will result in the event loop busy looping unless it is turned off eventually. This is different for "post" event sources that will be only triggered when some other non-post ran, and will thus not keep the event loop busy on its own.
2014-02-21sd-event: Fix systemd crash when using timer units.Thomas Bächler
There was a copy-paste error introduced in commit c2ba3ad6604ef2e189d7e0a36d6911116e84d3ab which causes the following error when using timer units: Assertion '(x->type == SOURCE_MONOTONIC && y->type == SOURCE_MONOTONIC) || (x->type == SOURCE_REALTIME && y->type == SOURCE_REALTIME)' failed at src/libsystemd/sd-event/sd-event.c:264, function latest_time_prioq_compare(). Aborting.
2014-02-20api: in constructor function calls, always put the returned object pointer ↵Lennart Poettering
first (or second) Previously the returned object of constructor functions where sometimes returned as last, sometimes as first and sometimes as second parameter. Let's clean this up a bit. Here are the new rules: 1. The object the new object is derived from is put first, if there is any 2. The object we are creating will be returned in the next arguments 3. This is followed by any additional arguments Rationale: For functions that operate on an object we always put that object first. Constructors should probably not be too different in this regard. Also, if the additional parameters might want to use varargs which suggests to put them last. Note that this new scheme only applies to constructor functions, not to all other functions. We do give a lot of freedom for those. Note that this commit only changes the order of the new functions we added, for old ones we accept the wrong order and leave it like that.