| Age | Commit message (Collapse) | Author |
|---|
|
To properly store priority in passed in pointer and return 0 for success.
Also add a test for verifying that it works correctly.
|
|
sd_event_get_iteration() (#3631)
This extends the existing event loop iteration counter to 64bit, and exposes it
via a new function sd_event_get_iteration(). This is helpful for cases like
issue #3612. After all, since we maintain the counter anyway, we might as well
expose it.
(This also fixes an unrelated issue in the man page for sd_event_wait() where
micro and milliseconds got mixed up)
|
|
|
|
Before we invoke now(CLOCK_BOOTTIME), let's make sure we actually have that
clock, since now() will otherwise hit an assert.
Specifically, let's refuse CLOCK_BOOTTIME early in sd-event if the kernel
doesn't actually support it.
This is a follow-up for #3037, and specifically:
https://github.com/systemd/systemd/pull/3037#issuecomment-210199167
|
|
(#3037)
It was added in 2.6.39, and causes an assertion to fail when running in mock
hosted on 2.6.32-based RHEL-6:
Assertion 'clock_gettime(map_clock_id(clock_id), &ts) == 0' failed at systemd/src/basic/time-util.c:70, function now(). Aborting.
|
|
numbers
And port all code over to use it.
|
|
Throughout the tree there's spurious use of spaces separating ++ and --
operators from their respective operands. Make ++ and -- operator
consistent with the majority of existing uses; discard the spaces.
|
|
Fixes: #2597
|
|
This should be handled fine now by .dir-locals.el, so need to carry that
stuff in every file.
|
|
event source
This should simplify handling of time events in clients and is in-line with the USEC_INFINITY macro we already have.
This way setting a timeout to 0 indicates "elapse immediately", and a timeout of USEC_INFINITY "elapse never".
|
|
deal with overflows
|
|
|
|
sd_event_now() is a public function, so we must check all
arguments for validity. Update man page and add tests.
Sample debug message:
Assertion 'IN_SET(clock, CLOCK_REALTIME, CLOCK_REALTIME_ALARM, CLOCK_MONOTONIC, CLOCK_BOOTTIME, CLOCK_BOOTTIME_ALARM)' failed at src/libsystemd/sd-event/sd-event.c:2719, function sd_event_now(). Ignoring.
|
|
|
|
Set SD_EVENT_PROFILE_DELAYS to activate accounting and periodic logging
of the distribution of delays between sd_event_run() calls.
Time spent in dispatching as well as time spent outside of
sd_event_run() is measured and accounted for. Every 5 seconds a
logarithmic histogram loop iteration delays since 5 seconds previous is
logged.
This is useful in identifying the frequency and magnitude of latencies
affecting the event loop, which should be kept to a minimum.
|
|
Printing the pointer variable really doesn't help, so drop that.
Instead, add a string lookup table for the EventSourceType enum, and print
the type of event source in case of errors.
|
|
GLIB has recently started to officially support the gcc cleanup
attribute in its public API, hence let's do the same for our APIs.
With this patch we'll define an xyz_unrefp() call for each public
xyz_unref() call, to make it easy to use inside a
__attribute__((cleanup())) expression. Then, all code is ported over to
make use of this.
The new calls are also documented in the man pages, with examples how to
use them (well, I only added docs where the _unref() call itself already
had docs, and the examples, only cover sd_bus_unrefp() and
sd_event_unrefp()).
This also renames sd_lldp_free() to sd_lldp_unref(), since that's how we
tend to call our destructors these days.
Note that this defines no public macro that wraps gcc's attribute and
makes it easier to use. While I think it's our duty in the library to
make our stuff easy to use, I figure it's not our duty to make gcc's own
features easy to use on its own. Most likely, client code which wants to
make use of this should define its own:
#define _cleanup_(function) __attribute__((cleanup(function)))
Or similar, to make the gcc feature easier to use.
Making this logic public has the benefit that we can remove three header
files whose only purpose was to define these functions internally.
See #2008.
|
|
|
|
|
|
|
|
|
|
We already have a state RUNNING and EXITING when we dispatch regular and
exit callbacks. Let's introduce a new state called PREPARING that is
active while we invoke preparation callbacks. This way we have a state
each for all three kinds of event handlers.
The states are currently not documented, hence let's add a new state to
the end, before we start documenting this.
|
|
Let's make _ref() calls happy when NULL is passed to them, and simply
return NULL without any assertion logic. This makes them nicely
symmetric to the _unref() calls which also are happy to take NULL and
become NOPs then.
|
|
|
|
|
|
There are more than enough to deserve their own .c file, hence move them
over.
|
|
string-util.[ch]
There are more than enough calls doing string manipulations to deserve
its own files, hence do something about it.
This patch also sorts the #include blocks of all files that needed to be
updated, according to the sorting suggestions from CODING_STYLE. Since
pretty much every file needs our string manipulation functions this
effectively means that most files have sorted #include blocks now.
Also touches a few unrelated include files.
|
|
pthread APIs (unlike the rest of libc) return their errors as positive
error codes directly from the functions, rather than using errno. Let's
make sure we always handle things that way.
|
|
Currently, we guarantee that if two event-sources with the same priority
fire at the same time, they're always dispatched in the same order. While
this might sound nice in theory, there's is little benefit in providing
stability on that level. We have no control over the order the events are
reported, hence, we cannot guarantee that we get notified about both at
the same time.
By dropping the stability guarantee, we loose roughly 10% Heap swaps in
the prioq on a desktop cold-boot. Krzysztof Kotlenga even reported up to
20% on his tests. This sounds worth optimizing, so drop the stability
guarantee.
|
|
Otherwise a disabled event source can get swapped with an enabled one
and cause a severe sd-event malfunction.
http://lists.freedesktop.org/archives/systemd-devel/2015-September/034356.html
|
|
We should never access the "signal" part of the event source unless the
event source is actually for a signal. In this case it's a child pid
handler however, hence make sure to use the right signal.
This is a fix for PR #1177, which in turn was a fix for
9da4cb2be260ed123f2676cb85cb350c527b1492.
|
|
This looks like a typo from commit 9da4cb2b where it was added.
|
|
RT signals operate in a queue, and we should be careful to never merge
two queued signals into one. Hence, makes sure we only ever dequeue a
single signal at a time and leave the remaining ones queued in the
signalfd. In order to implement correct priorities for the signals
introduce one signalfd per priority, so that we only process the highest
priority signal at a time.
|
|
Let's help users to debug issues with epoll fd removal by printing the
name of the event source.
|
|
This is a follow-up to #907, and makes the same change for all our other
public APIs.
|
|
Previously, if the event loop never ran before sd_event_now() would
fail. With this change it will instead fall back to invoking now(). This
way, the function cannot fail anymore, except for programming error when
invoking it with wrong parameters.
This takes into account the fact that many callers did not handle the
error condition correctly, and if the callers did, then they kept simply
invoking now() as fall back on their own. Hence let's shorten the code
using this call, and make things more robust, and let's just fall back
to now() internally.
Whether now() is used or the cache timestamp may still be detected via
the return value of sd_event_now(). If > 0 is returned, then the fall
back to now() was used, if == 0 is returned, then the cached value was
returned.
This patch also simplifies many of the invocations of sd_event_now():
the manual fall back to now() can be removed. Also, in cases where the
call is invoked withing void functions we can now protect the invocation
via assert_se(), acknowledging the fact that the call cannot fail
anymore except for programming errors with the parameters.
This change is inspired by #841.
|
|
If we call EPOLL_CTL_DEL, we *REALLY* expect the file-descriptor to be
present in that given epoll-set. We actually track such state via our
s->io.registered flag, so it better be true.
Make sure if that's not true, we treat it similar to assert_return() (ie.,
print a loud warning).
|
|
This ports a lot of manual code over to sigprocmask_many() and friends.
Also, we now consistly check for sigprocmask() failures with
assert_se(), since the call cannot realistically fail unless there's a
programming error.
Also encloses a few sd_event_add_signal() calls with (void) when we
ignore the return values for it knowingly.
|
|
|
|
We protect most of the API from use accross forks, but we still allow both
sd_event and sd_event_source objects to be unref'ed. This would cause
problems as it would unregister sources from the underlying eventfd, hence
also affecting the original instance in the parent process.
This fixes the issue by not touching the fds on unref when done accross a fork,
but still free the memory.
This fixes a regression introduced by
"udevd: move main-loop to sd-event": 693d371d30fee
where the worker processes were disabling the inotify event source in the
main daemon.
|
|
No functional changes.
|
|
|
|
sd_event_dispatch() returns 0 on FINISH, so let's eat that up.
|
|
|
|
Replace ENOTSUP by EOPNOTSUPP as this is what linux actually uses.
|
|
|
|
Currently the code will silently blank out events if there are more
then 512 epoll events, causing them never to be handled at all. This
patch removes the cap on the number of events for epoll_wait, thereby
avoiding this issue.
|
|
This patch removes includes that are not used. The removals were found with
include-what-you-use which checks if any of the symbols from a header is
in use.
|
|
In both cases exit the event loop.
|
|
Otherwise they can be optimized away with -DNDEBUG
|
