summaryrefslogtreecommitdiff
path: root/src/libsystemd/sd-rtnl/rtnl-types.c
AgeCommit message (Collapse)Author
2015-06-13sd-netlink: rename from sd-rtnlTom Gundersen
2015-04-29networkd: introduce vti6 tunnelSusant Sahani
This patch add support to create vti6 tunnel test: vt6.network [Match] Name=wlan0 [Network] Tunnel=ip6vti vti6.netdev [NetDev] Name=ip6vti Kind=vti6 [Tunnel] Local=2a00:ffde:4567:edde::4987 Remote=2001:473:fece:cafe::5179 ip link 11: ip6_vti0@NONE: <NOARP> mtu 1500 qdisc noop state DOWN mode DEFAULT group default link/tunnel6 :: brd :: 12: ip6vti@wlan0: <POINTOPOINT,NOARP> mtu 1500 qdisc noop state DOWN mode DEFAULT group default link/tunnel6 2a00:ffde:4567:edde::4987 peer 2001:473:fece:cafe::5179
2015-04-20networkd: Add support for bond option.Susant Sahani
This patch adds configurational support for bond option. Test conf: bond.netdev --- [NetDev] Name=bond1 Kind=bond [Bond] ArpAllTargets=all PrimaryReselect=better ArpIntervalSec=10s ArpIpTargets= 192.168.8.102 192.168.8.101 192.168.8.102 --- $cat /proc/net/bonding/bond1 Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011) Bonding Mode: load balancing (round-robin) MII Status: up MII Polling Interval (ms): 0 Up Delay (ms): 0 Down Delay (ms): 0 ARP Polling Interval (ms): 10000 ARP IP target/s (n.n.n.n form): 192.168.8.100, 192.168.8.101, 192.168.8.102
2015-04-08sd-rtnl: properly size attribute array if IFA_FLAGS was missingLennart Poettering
2015-03-27sd-rtnl: Always enable IFA_FLAGSPatrik Flykt
IFA_FLAGS is a discrete value and has no preprocessor #define defined for it. Fix this by always using the value.
2015-03-23sd-rtnl: handle empty multi-part message from the kernelAlin Rauta
We strips out NLMSG_DONE piece from a multi-part message adding into the receive queue only the messages containing actual data. If we send a request to the kernel for getting the forwarding database table (just an example), the response will be a multi-part message like below: 1. FDB entry 1; 2. FDB entry 2; 3. NLMSG_DONE; We strip out "3. NLMSG_DONE;" part and places into the receive queue a pointer to "1. FDB entry 1; 2. FDB entry 2". But if the FDB table is empty, the respose from the kernel will look like below: 1. NLMSG_DONE; We strip out "1. NLMSG_DONE;" part and since there is no actual data got, it continues waiting until reaching timeout. Therefore, a call to "sd_rtnl_call" to send and wait for a response from kernel will exit with timeout which is interpreted as error in communication. This patch puts the NLMSG_DONE message on the receive queue if it ends an empty multi-part message. This situation is detected in sd_rtnl_call() and in the callback code and NULL is returned to the caller instead. [tomegun: - added/reworded commit message - extend the same support to sd_rtnl_call_async() - drop debug logging from library, we only do this if something is really wrong, but an empty multi-part message is perfectly normal - modernize the code we touch whilst we are at it]
2015-03-13tree-wide: there is no ENOTSUP on linuxDavid Herrmann
Replace ENOTSUP by EOPNOTSUPP as this is what linux actually uses.
2015-02-26sd-rtnl: types - fix check for unsupported typeTom Gundersen
Spotted by Thomas H.P. Andersen <phomes@gmail.com>
2015-02-26sd-rtnl: types - don't assert_return in private APITom Gundersen
2015-02-23libsystemd: revert one hunk of duplicate ifdef removalZbigniew Jędrzejewski-Szmek
This change exposed a bug in kernel headers: /usr/include/linux/if_bridge.h:184:20: error: field 'ip6' has incomplete type struct in6_addr ip6; ^ /usr/include/linux/if_tunnel.h:76:19: error: field 'prefix' has incomplete type struct in6_addr prefix; ^
2015-02-23remove unused includesThomas Hindoe Paaboel Andersen
This patch removes includes that are not used. The removals were found with include-what-you-use which checks if any of the symbols from a header is in use.
2015-02-09sd-rtnl: fix typesystem for IFLA_AF_SPECTom Gundersen
Got this one wrong, it is not a union, just a nested container.
2015-02-08sd-rtnl: add support for IFLA_INET6_*Tom Gundersen
2015-02-08sd-rtnl: extend type system to allow address-family to decide the union membersTom Gundersen
So far we only supported selecting them by sibling attributes. (This stuff is all a bit crazy, but there seems to be no other way...)
2015-01-22networkd: Introduce ip6gre and ip6gretapSusant Sahani
This patch introduces ipv6 gre and gretap. test: ip6gre.netdev: [NetDev] Name=ip6gretap Kind=ip6gretap [Tunnel] Local=2a00:ffde:4567:edde::4987 Remote=2001:473:fece:cafe::5179 ip6gre.network: [Match] Name=eno16777736 [Network] Tunnel=ip6gretap ip link 6: ip6gre@eno16777736: <POINTOPOINT,NOARP> mtu 1448 qdisc noop state DOWN mode DEFAULT group default link/gre6 2a:00:ff:de:45:67:ed:de:00:00:00:00:00:00:49:87 peer 20:01:04:73:fe:ce:ca:fe:00:00:00:00:00:00:51:79
2015-01-22networkd: Introduce IP6 tunnelSusant Sahani
This patch enables networkd to create IP6 tunnels example conf: ipip6.netdev: [NetDev] Name=ipip6-tunnel Kind=ip6tnl [Tunnel] Mode=ip4ipv6 Local=2a00:ffde:4567:edde::4987 Remote=2001:473:fece:cafe::5179 ipip6.network [Match] Name=wlan0 [Network] Tunnel=ipip6-tunnel 23: ipip6-tunnel@wlan0: <POINTOPOINT,NOARP> mtu 1452 qdisc noop state DOWN mode DEFAULT group default link/tunnel6 2a00:ffde:4567:edde::4987 peer 2001:473:fece:cafe::5179
2015-01-22networkd: introduce gretapSusant Sahani
This patch introdeces gretap to networkd
2015-01-19networkd: netdev - add ipvlan supportTom Gundersen
2014-12-18networkd: add FDB supportAlin Rauta
2014-12-02sd-rtnl: add typesystem for RTM_*NEIGHTom Gundersen
2014-10-29sd-rtnl: add bridge port rtnl attributes.Susant Sahani
Add bridge port attributes to sd-rtnl to configure via networkd.
2014-07-21sd-rtnl: uncomment bond rtnl constantsSusant Sahani
2014-07-16test-tables: add new entriesZbigniew Jędrzejewski-Szmek
One missing string found. A few things had to be moved around to make it possible to test them.
2014-07-01networkd: netdev - add dummy supportTom Gundersen
2014-06-16sd-rtnl: add support for vxlan rtnl attributesSusant Sahani
This patch adds vxlan rtnl attributes to sd-rtnl
2014-06-02networkd: introduce vti tunnelSusant Sahani
This patch enables vti tunnel support. example conf: file : vti.netdev [NetDev] Name=vti-tun Kind=vti MTUBytes=1480 [Tunnel] Local=X.X.X.X Remote=X.X.X.X file: vti.network [Match] Name=em1 [Network] Tunnel=vti-tun TODO: Add more attributes for vti tunnel IFLA_VTI_IKEY IFLA_VTI_OKEY
2014-06-02networkd: introduce gre tunnelSusant Sahani
This patch enables gre tunnel support. example conf: file : gre.netdev [NetDev] Name=gre-tun Kind=gre MTUBytes=1480 [Tunnel] Local=X.X.X.X Remote=X.X.X.X file: gre.network [Match] Name=em1 [Network] Tunnel=gre-tun TODO: Add more attributes for gre tunnel IFLA_GRE_IFLAGS IFLA_GRE_IFLAGS IFLA_GRE_IKEY IFLA_GRE_OKEY
2014-05-12networkd: introduce ipip tunnelSusant Sahani
This patch enables basic ipip tunnel support. It works with kernel module ipip example conf: file: ipip.netdev [NetDev] Name=ipip-tun Kind=ipip MTUBytes=1480 [Tunnel] Local=192.168.223.238 Remote=192.169.224.239 TTL=64 file: ipip.network [Match] Name=em1 [Network] Tunnel=ipip-tun [tomegun: - drop unused variable - take ref when enslaving]
2014-04-05build-sys: add newly used if_link.h defines to missing.hZbigniew Jędrzejewski-Szmek
Reported-by: Arnaud Gaboury <arnaud.gaboury@gmail.com>
2014-04-03sd-rtnl: fix broken test cases and add support for tunnelSusant Sahani
This patch fixes the broken test-cases for sd-rtnl and add support for ipip and sit tunnel. [tomegun: minor fixups]
2014-04-03networkd: smooth transition from ipv4ll to dhcp addressUmut Tezduyar Lindskog
Currently when both ipv4ll and dhcp are enabled, ipv4ll address (if one has been claimed) is removed when dhcp address is aquired. This is not the best thing to do since there might be clients unaware of the removal trying to communicate. This patch provides a smooth transition between ipv4ll and dhcp. If ipv4ll address was claimed [1] before dhcp, address is marked as deprecated. Deprecated address is still a valid address and packets can be received on it but address cannot be selected as a source address. If dhcp lease cannot be extended, then ipv4ll address is marked as valid again. [1] If there is no collision, claiming IPv4LL takes between 4 to 7 seconds.
2014-03-29sd-rtnl: types - hook up bond typesTom Gundersen
Reported by Thomas Hindoe Paaboel Andersen <phomes@gmail.com>
2014-03-28sd-rtnl: rework rtnl type systemTom Gundersen
Use a static table with all the typing information, rather than repeated switch statements. This should make it a lot simpler to add new types. We need to keep all the type info to be able to create containers without exposing their implementation details to the users of the library. As a freebee we verify the types of appended/read attributes. The API is extended to nicely deal with unions of container types.
generated by cgit v1.2.3-54-g00ecf (git 2.45.2) at 2024-07-23 04:39:14 +0000