| Age | Commit message (Collapse) | Author |
|---|
|
the network is down
|
|
This is useful for alternative network management solutions (such as NetworkManager) to push DNS configuration data
into resolved.
The calls will fail should networkd already have taken possesion of a link, so that the bus API is only available if
we don't get the data from networkd.
|
|
These were previously forgotten, add them now.
|
|
|
|
The code is correct, assuming that the kernel does not feed
us garbled data. Let's initialize those variables to avoid the
warning anyway.
|
|
Setting of dst_id was based on interplay of two booleans,
making the logic hard to follow (for humans and compilers alike).
gcc was confused and emmitted a warning about an uninitialized
variable. Rework the code to make it obvious that dst_id is
set properly.
|
|
|
|
|
|
sd_event_now() is a public function, so we must check all
arguments for validity. Update man page and add tests.
Sample debug message:
Assertion 'IN_SET(clock, CLOCK_REALTIME, CLOCK_REALTIME_ALARM, CLOCK_MONOTONIC, CLOCK_BOOTTIME, CLOCK_BOOTTIME_ALARM)' failed at src/libsystemd/sd-event/sd-event.c:2719, function sd_event_now(). Ignoring.
|
|
Go over the entries in the map and check that they make sense.
Tests are added. In the future we might want to do additional
checks, e.g. verifying that the error names are in the expected
format.
|
|
errno_from_name used an unusual return convention where 0 meant
"not found". This tripped up config_parse_syscall_errno(),
which would treat that as success. Return -EINVAL instead,
and adjust bus_error_name_to_errno() for the new convention.
Also remove a goto which was used as a simple if and clean
up surroudning code a bit.
|
|
Compare errno with zero in a way that tells gcc that
(if the condition is true) errno is positive.
|
|
|
|
sd-event: instrument sd_event_run() for profiling delays
|
|
Set SD_EVENT_PROFILE_DELAYS to activate accounting and periodic logging
of the distribution of delays between sd_event_run() calls.
Time spent in dispatching as well as time spent outside of
sd_event_run() is measured and accounted for. Every 5 seconds a
logarithmic histogram loop iteration delays since 5 seconds previous is
logged.
This is useful in identifying the frequency and magnitude of latencies
affecting the event loop, which should be kept to a minimum.
|
|
Also add a coccinelle receipt to help with such transitions.
|
|
supporting them
If we already degraded the feature level below DO don't bother with sending requests for DS, DNSKEY, RRSIG, NSEC, NSEC3
or NSEC3PARAM RRs. After all, we cannot do DNSSEC validation then anyway, and we better not press a legacy server like
this with such modern concepts.
This also has the benefit that when we try to validate a response we received using DNSSEC, and we detect a limited
server support level while doing so, all further auxiliary DNSSEC queries will fail right-away.
|
|
nl->fd can be 0.
|
|
tests: test-resolve: wait until all queries are completed
|
|
This is a follow-up for 4a134c4903dbf6ef6c6a
Fixes:
$ ./test-resolve
209.132.183.105:80
209.132.183.105:80
canonical name: n/a
193.99.144.85:0
[2a02:2e0:3fe:1001:7777:772e:2:85]:0
canonical name: www.heise.de
Host: web.heise.de -- Serv: http
$ ./test-resolve
193.99.144.85:0
[2a02:2e0:3fe:1001:7777:772e:2:85]:0
canonical name: www.heise.de
Host: web.heise.de -- Serv: http
$ ./test-resolve
...
|
|
Twelfth DNSSEC PR
|
|
|
|
This adds a DNSSEC= setting to .network files, and makes resolved honour
them.
|
|
|
|
|
|
Fixes:
$ make valgrind-tests TESTS=test-bus-cleanup
==6363== 9 bytes in 1 blocks are possibly lost in loss record 1 of 28
==6363== at 0x4C2BBCF: malloc (vg_replace_malloc.c:299)
==6363== by 0x197D12: hexmem (hexdecoct.c:79)
==6363== by 0x183083: bus_socket_start_auth_client (bus-socket.c:639)
==6363== by 0x1832A0: bus_socket_start_auth (bus-socket.c:678)
==6363== by 0x183438: bus_socket_connect (bus-socket.c:705)
==6363== by 0x14B0F2: bus_start_address (sd-bus.c:1053)
==6363== by 0x14B592: sd_bus_start (sd-bus.c:1134)
==6363== by 0x14B95E: sd_bus_open_system (sd-bus.c:1235)
==6363== by 0x1127E2: test_bus_open (test-bus-cleanup.c:42)
==6363== by 0x112AAE: main (test-bus-cleanup.c:87)
==6363==
...
$ ./libtool --mode=execute valgrind ./test-bus-cleanup
==6584== LEAK SUMMARY:
...
==6584== possibly lost: 10,566 bytes in 27 blocks
|
|
Since we honour RFC5011 revoked keys it might happen we end up with an
empty trust anchor, or one where there's no entry for the root left.
With this patch the logic is changed what to do in this case.
Before this patch we'd end up requesting the root DS, which returns with
NODATA but a signed NSEC we cannot verify, since the trust anchor is
empty after all. Thus we'd return a DNSSEC result of "missing-key", as
we lack a verified version of the key.
With this patch in place, look-ups for the root DS are explicitly
recognized, and not passed on to the DNS servers. Instead, if
downgrade-ok mode is on an unsigned NODATA response is synthesized, so
that the validator code continues under the assumption the root zone was
unsigned. If downgrade-ok mode is off a new transaction failure is
generated, that makes this case recognizable.
|
|
|
|
Ninth DNSSEC patch set
|
|
|
|
This was missing when the error type was added in
ac720200b7e5b80cc4985087e38f3452e5b3b080.
|
|
EIO is really too generic, and indicates transmission problems.
|
|
Fixes:
```
$ ./configure ... --enable-dbus
$ make
$ make valgrind-tests TESTS=test-bus-marshal
...
==25301== 51 bytes in 1 blocks are definitely lost in loss record 7 of 18
==25301== at 0x4C2DD9F: realloc (in /usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so)
==25301== by 0x5496B8C: ??? (in /lib/x86_64-linux-gnu/libdbus-1.so.3.14.3)
==25301== by 0x54973E3: _dbus_string_append_printf_valist (in /lib/x86_64-linux-gnu/libdbus-1.so.3.14.3)
==25301== by 0x547E5C2: _dbus_set_error_valist (in /lib/x86_64-linux-gnu/libdbus-1.so.3.14.3)
==25301== by 0x547E73E: dbus_set_error (in /lib/x86_64-linux-gnu/libdbus-1.so.3.14.3)
==25301== by 0x548969A: dbus_message_demarshal (in /lib/x86_64-linux-gnu/libdbus-1.so.3.14.3)
==25301== by 0x115C1A: main (test-bus-marshal.c:244)
==25301==
```
|
|
via TCP
Previously, if we couldn't reach a server via UDP we'd generate an
MAX_ATTEMPTS transaction result, but if we couldn't reach it via TCP
we'd generate a RESOURCES transaction result. While it is OK to generate
two different errors I think, "RESOURCES" is certainly a misnomer.
Introduce a new transaction result "CONNECTION_FAILURE" instead.
|
|
Printing the pointer variable really doesn't help, so drop that.
Instead, add a string lookup table for the EventSourceType enum, and print
the type of event source in case of errors.
|
|
We need to check the same thing in multiple tests. Use a shared
macro to make it easier to update the list of errnos.
Change the errno code for "unitialized cgroup fs" for ENOMEDIUM.
Exec format error looks like something more serious.
This fixes test-execute invocation in mock.
|
|
Let's distuingish the cases where our code takes an active role in
selinux management, or just passively reports whatever selinux
properties are set.
mac_selinux_have() now checks whether selinux is around for the passive
stuff, and mac_selinux_use() for the active stuff. The latter checks the
former, plus also checks UID == 0, under the assumption that only when
we run priviliged selinux management really makes sense.
Fixes: #1941
|
|
GLIB has recently started to officially support the gcc cleanup
attribute in its public API, hence let's do the same for our APIs.
With this patch we'll define an xyz_unrefp() call for each public
xyz_unref() call, to make it easy to use inside a
__attribute__((cleanup())) expression. Then, all code is ported over to
make use of this.
The new calls are also documented in the man pages, with examples how to
use them (well, I only added docs where the _unref() call itself already
had docs, and the examples, only cover sd_bus_unrefp() and
sd_event_unrefp()).
This also renames sd_lldp_free() to sd_lldp_unref(), since that's how we
tend to call our destructors these days.
Note that this defines no public macro that wraps gcc's attribute and
makes it easier to use. While I think it's our duty in the library to
make our stuff easy to use, I figure it's not our duty to make gcc's own
features easy to use on its own. Most likely, client code which wants to
make use of this should define its own:
#define _cleanup_(function) __attribute__((cleanup(function)))
Or similar, to make the gcc feature easier to use.
Making this logic public has the benefit that we can remove three header
files whose only purpose was to define these functions internally.
See #2008.
|
|
|
|
|
|
|
|
|
|
We already have a state RUNNING and EXITING when we dispatch regular and
exit callbacks. Let's introduce a new state called PREPARING that is
active while we invoke preparation callbacks. This way we have a state
each for all three kinds of event handlers.
The states are currently not documented, hence let's add a new state to
the end, before we start documenting this.
|
|
Let's make _ref() calls happy when NULL is passed to them, and simply
return NULL without any assertion logic. This makes them nicely
symmetric to the _unref() calls which also are happy to take NULL and
become NOPs then.
|
|
This is a continuation of the previous include sort patch, which
only sorted for .c files.
|
|
|
|
siphash24: let siphash24_finalize() and siphash24() return the result…
|
|
Rather than passing a pointer to return the result, return it directly
from the function calls.
Also, return the result in native endianess, and let the callers care
about the conversion. For hash tables and bloom filters, we don't care,
but in order to keep MAC addresses and DHCP client IDs stable, we
explicitly convert to LE.
|
|
Sort the includes accoding to the new coding style.
|
|
Add a few includes that we rely on to be include already.
|
