| Age | Commit message (Collapse) | Author |
|---|
|
Catch up with latest changes in kdbus.ko:
* Signals can be sent as unicast now, hence they need to be marked as
such with the KDBUS_MSG_SIGNAL in the message flags.
* Follow ioctl number change for KDBUS_CMD_FREE
|
|
|
|
|
|
https://github.com/vlajos/misspell_fixer
https://github.com/torstehu/systemd/commit/b6fdeb618cf2f3ce1645b3315f15f482710c7ffa
Thanks to Torstein Husebo <torstein@huseboe.net>.
|
|
ENOSYS is used to signify compiled-out functionality. Using it for
different kinds of error is misleading.
For BUS_ERROR_SLEEP_VERB_NOT_SUPPORTED, logind-action.c uses ENOTSUP
already, so changing it to ENOTSUP makes the dbus and action paths
behave the same.
|
|
This implements two new helpers, discussed on systemd-devel about 1 year
ago:
sd_bus_emit_object_added()
sd_bus_emit_object_removed()
Both calls are equivalent to their respective counterpart
sd_bus_emit_interfaces_{added/removed}(), but can figure out the list of
interfaces themselves, instead of requiring the caller to provide them.
Furthermore, both calls properly deal with builtin interfaces provided via
org.freedesktop.DBus.* and alike.
Both calls simply traverse a node and all its parent nodes to figure out a
list of all interfaces registered as vtable or fallback. It then appends
each of them, similar to the interfaces_{added/removed}() helpers.
Note that interfaces_{added/removed}() runs a parent traversal for *each*
passed interface. Therefore, it can simply bail out, once it found a
parent node that implements a given interface.
With object_{added/removed}() we cannot know the registered interfaces in
advance, thus, we cannot run one traversal per node. Instead, we run a
single traversal and remember all interfaces that we added. Therefore, a
child-interface overrides all conflicting parent-interfaces. We keep a
"Set *s" context to track those while climbing up the tree.
|
|
The kernel provides capabilities as a u32 array, sd-bus uses an u8 array.
This works fine on little-endian as both are encoded the same way.
However, this fails on big-endian if we do not perform sufficient
byte-swapping on each u32 entry.
This patch makes sd-bus use u32, too. We avoid changing any kernel
provided data so we can keep pointing into kdbus pool buffers which
contain u32 arrays.
|
|
The number of available caps can be read from
/proc/sys/kernel/cap_last_cap during runtime. Our helper cap_last_cap()
does that, so there's no reason to remember the size of any capability
cache. We can just pre-allocate arrays with a suitable size for all
available caps and reject any higher caps.
The kernel capability API uses u32 as base so make sure we do the same.
Note that this is specified by POSIX, so it's unlikely to change.
|
|
systemd-nspawn for containers
This is basically just a shortcut for "systemctl enable
systemd-nspawn@<foobar>.service", but does escaping.
|
|
|
|
Drop spurious 'we'.
|
|
All we care about is that the kernel (pid==0) sent the message. Verifying the sender uid
seems to break when using userns.
Reported by Stéphane Graber.
|
|
Only a minor change as the timeout would be hit soon thereafetr at the next loop.
|
|
This caused rtnl_poll to always return true immediately in sd_rtnl_call().
|
|
Read the message form the socket or we will loop trying to read the
same message repeatedly.
|
|
We should just try again instead.
|
|
We drop messages received from the wrong uid/pid, log this at debug level.
|
|
|
|
They do not use any functions from libcap directly. The CAP_SYS_ADMIN constant
in use by bus-objects.c comes from <linux/capability.h> imported through
"missing.h". The "missing.h" header is imported through "util.h" which gets
imported in "bus-util.h".
Tested that everything builds cleanly after this change.
|
|
Pretty much everywhere else we use the generic term "machine" when
referring to containers in API, so let's do though in sd-bus too. In
particular, since the concept of a "container" exists in sd-bus too, but
as part of the marshalling system.
|
|
|
|
a PID instead of a container name
|
|
files from core
Stuff in src/shared or src/libsystemd should *never* include code from
src/core or any of the tools, so don't do that here either. It's not OK!
|
|
Kernel notifications carry a timestamp now, so make sure
bus_kernel_translate_message() doesn't complain when it stumbles across
them.
|
|
Sync kdbus.h with upstream changes:
* Two optional cancellation points where added for synchronously
blocking KDBUS_CMD_SEND commands: A sigmask to change the mask
of accepted signals before the task is put to sleep, and a
generic file descriptor that can be written to, in order to cancel
the command. Both methods are currently unused.
* The KDBUS_CMD_CANCEL ioctl was removed. sd-bus was never using
that command, so there's no change needed.
* Some kerneldoc fixes
|
|
|
|
|
|
|
|
Make sure to set send-attach-flags on BUS_MAKE. These control which
information is revealed about the bus-owner.
|
|
Make sure we don't call into any bus_kernel_*() functions before
b->is_kernel is set to true. Hard-code the CMD_FREE just like the other
helpers do.
|
|
Changes:
* bloom parameters are returned in an offset via HELLO
* FREE now takes items just like any other ioctl
|
|
|
|
|
|
This is libudev-hwdb, but decoupled from libudev and in the libsystemd style.
The core code is unchanged, apart from the following minor changes:
- hwdb.bin located in /**/systemd/hwdb/ take preference over the ones located
in /**/udev/
- properties are stored internally in an OrderedHashmap, rather than a
linked list.
- a new API call allows individual properties to be queried directly, rather
than iterating over them all
- the iteration over properties have been moved inside the library, rather than
exposing a list directly
- the unused 'flags' parameter was dropped
|
|
Sync up with recent kdbus changed:
* several ioctls gained .size and .items members (but still unused)
* CMD_SEND gained its own ioctl structure
* several members of kdbus_msg were dropped as they were only used during
SEND, not during RECV etc.
* CMD_RECV and CMD_SEND now share a kdbus_reply member which contains the
offset and size of the returned message.
|
|
Make sure the whole cmd_free object is zeroed before passing it into the
kernel. This makes valgrind happy and makes us future proof.
|
|
We must restore part->mmap_begin when poping memfds from the memfd-cache.
We rely on the memfds to be unsealed, so we can be sure that we own the
whole FD. Therefore, simply set part->mmap_begin to the same as
part->data.
This fixes test-bus-kernel-benchmark.
|
|
|
|
src/libsystemd/sd-bus/bus-common-errors.h
Stuff in src/shared/ should not use stuff from src/libsystemd/ really.
|
|
kdbus is not available
|
|
This way, we can ensure we have a more complete, up-to-date list of
capabilities around, always.
|
|
Support timer options --on-active=, --on-boot=, --on-startup=,
--on-unit-active=, --on-unit-inactive=, --on-calendar=. Each options
corresponding with OnActiveSec=, OnBootSec=, OnStartupSec=,
OnUnitActiveSec=, OnUnitInactiveSec=, OnCalendar= of timer
respectively. And OnCalendar= and WakeSystem= supported by
--timer-property= option like --property= of systemd-run.
And if --unit= option and timer options are specified the command can
be omitted. In this case, systemd-run assumes the target service is
already loaded. And just try to generate transient timer unit only.
|
|
As kdbus no longer exports this, remove all traces from sd-bus too
|
|
|
|
kdbus-git gained two new features:
* memfd offsets: This allows to specify a 'start' offset in kdbus_memfd
so you can send partial memfd hunks instead of always
the full memfd
* KDBUS_HELLO_UNPRIVILEGED: If passed during HELLO, the client will be
treated as unprivileged.
|
|
|
|
connections
|
|
|
|
The kernel always returns all addresses, rather than only for the given link, so let's only enumerate once.
|
|
Nothing was being dropped, we just failed to account for the NLMSG_DONE.
|
