| Age | Commit message (Collapse) | Author |
|---|
|
Some places invoked fflush() directly with their own manual error
checking, let's unify all that by using fflush_and_check().
This also unifies the general error paths of fflush()+rename() file
writers.
|
|
The gvariant root container contains a 'variant' at the end, which embeds
the whole message body. This variant *must* contain a structure so we are
compatible to dbus1. Otherwise, it could encode at most 1 type, instead
of a full signature.
Our gvariant message parser already parses the variant-content as a
structure, so we're mostly good. However, it does *not* include the
opening and closing parantheses, nor does it parse them.
This patch fixes the decoder to verify a message contains the
parantheses, and also make the encoder add those parantheses into the
marshaled message.
|
|
The unary type has a fixed size of 1 in gvariant. Make sure we properly
encode it as such. Right now, we encode/decode it as empty sequence.
|
|
If c->item_size is 0, the next item to parse in a structure is empty.
However, this also implies that the signature must be empty. The latter
case is already handled just fine by enter_struct_or_dict_entry() so
there is no reason to handle the same case in the caller.
|
|
Right now sd_bus_message_skip() will abort execution if passed a
signature of the unary type "()". Regardless whether this should be
supported or not, we really must not abort. Drop the incorrect assertion
and add a test-case for this.
|
|
networkd: add support for Macvtap
|
|
Each signal of the ObjectManager interface carries the path of the object
in question as an argument. Therefore, a caller will deduce the object
this signal is generated for, by parsing the _argument_. A caller will
*not* use the object-path of the message itself (i.e., message->path).
This is done on purpose, so the caller can rely on message->path to be
the path of the actual object-manager that generated this signal, instead
of the path of the object that triggered this signal.
This commit fixes all InterfacesAdded/Removed signals to use the path of
the closest object-manager as message->path. 'closest' in this case means
closest parent with at least one object-manager registered.
This fix raises the question what happens if we stack object-managers in
a hierarchy. Two implementations are possible: First, we report each
object only on the nearest object-manager. Second, we report it on each
parent object-manager. This patch chooses the former. This is compatible
with other existing ObjectManager implementations, which are required to
call GetManagedObjects() recursively on each object they find, which
implements the ObjectManager interface.
|
|
|
|
Follow up for v222-124-g79e27dbcb1.
|
|
Defaults to zero, which retains the current behaviour.
Fixes #577
|
|
In bus_kernel_translate_message(), we print a DEBUG message on unknown
items. But right now, we also print this message for KDBUS_ITEM_TIMESTAMP
despite parsing it properly. Fix this!
|
|
|
|
Hook up container userns with nss-mymachines
|
|
|
|
sd-netlink: add tunnel parameters
|
|
Instead of open-coding, use isempty() to check NULL or empty string
for consistency.
|
|
|
|
This adds test-bus-proxy which should be used to test correct behavior of
systemd-bus-proxyd. The first test that was added is to verify we actually
receive NameAcquired signals for ourselves on bus-connect.
|
|
If the caller does not specify arg1 for NameOwnerChanged matches, we
really must take the ID from arg2 or arg3, if provided. They are
guaranteed to be identical to arg1 if either is supplied, but there is no
strict requiredment that arg1 is supplied. Hence, make sure to always
take the more restrictive match. Otherwise, we install rather wide
matches without anyone requiring them.
|
|
Make sure we don't install NameOwnerChanged matches if the caller passed
a destination='' match (except if it is the broadcast address). Per spec,
all NameOwnerChanged signals are broadcasts.
Only the NameLost/NameAcquired signals are unicasts, but those are never
received through sd-bus. Instead, the bus-proxy synthesizes them and it
already installs proper matches for them.
|
|
Make sure we actually parse "unsigned long long" if we encode a uint64_t.
Otherwise, we will get random data from the stack.
|
|
In gvariant, all fixed-size objects need to be sized a multiple of their
alignment. If a structure has only fixed-size members, it is required to
be fixed size itself. If you imagine a structure like (ty), you have an
8-byte member followed by an 1-byte member. Hence, the overall inner-size
is 9. The alignment of the object is 8, though. Therefore, the specs
mandates final padding after fixed-size structures, to make sure it's
sized a multiple of its alignment (=> 16).
On the gvariant decoder side, we already account for this in
bus_gvariant_get_size(), as we apply overall padding to the size of the
structure. Therefore, our decoder correctly skips such final padding when
parsing fixed-size structure.
On the gvariant encoder side, however, we don't account for this final
padding. This patch fixes the structure and dict-entry encoders to
properly place such padding at the end of non-uniform fixed-size
structures.
The problem can be easily seen by running:
$ busctl --user monitor
and
$ busctl call --user org.freedesktop.systemd1 / org.foobar foobar "(ty)" 777 8
The monitor will fail to parse the message and print an error. With this
patch applied, everything works fine again.
This patch also adds a bunch of test-cases to force non-uniform
structures with non-pre-aligned positions.
Thanks to Jan Alexander Steffens <jan.steffens@gmail.com> for spotting
this and narrowing it down to non-uniform gvariant structures. Fixes #597.
|
|
So right now our object-tree is limited to 2 levels at most
('/' and '/foo/...../bar'). We never link any intermediate levels, even
though that was clearly the plan. Fix the bus_node_allocate() helper to
actually link all intermediate nodes, too, not just the root node.
This fixes a simple inverse ptr-diff bug.
The downside of this fix is that we clearly never tested (nor used) the
object tree in any way. The only reason that the introspection works is
that our enumerators shortcut the object tree.
Lets see whether that code actually works..
Thanks to: Nathaniel McCallum <nathaniel@themccallums.org>
..for reporting this. See #524 for an actual example code.
|
|
It is highly confusing if a getter function returns 0, but the value is
set to NULL. This, right now, triggers assertions as code relies on the
returned values to be non-NULL.
Like with sd-bus-creds and friends, return 0 only if a value is actually
available.
Discussed with Tom, and actually fixes real bugs as in #512.
|
|
This merges:
sd-netlink: respect attribute type flags
..fixing a conflict due to a typo fix.
|
|
We were ignoring failures from unhexchar, which meant that invalid
hex characters were being turned into garbage rather than the string
rejected.
Fix this by making unhexmem return an error code, also change the API
slightly, to return the size of the returned memory, reflecting the
fact that the memory is a binary blob,and not a string.
For convenience, still append a trailing NULL byte to the returned
memory (not included in the returned size), allowing callers to
treat it as a string without doing a second copy.
|
|
Given a container "foo", that maps user id $UID to container user, using
user namespaces, this NSS module extenstion will now map the $UID to a
name "vu-foo-$TUID" for the translated UID $UID.
Similar, userns groups are mapped to "vg-foo-$TGID" for translated GIDs
of $GID.
This simple change should make userns users more discoverable. Also,
given that many tools like "adduser" check NSS before allocating a UID,
should lower the chance of UID range conflicts between tools.
|
|
sd-bus: include queried path in GetManagedObjects
|
|
If GetManagedObjects is called on /foo/bar, then it should also include
the object /foo/bar, if it exists. Right now, we only include objects
underneath /foo/bar/.
This follows the behavior of existing dbus implementations.
Obsoletes #527 and fixes #525. Reported by: Nathaniel McCallum
|
|
All other *_get_description() functions use 'const char**', so make sure
sd_bus_slot_get_description() does the same.
This changes API, but ABI stays stable. I think this is fine, but I
wouldn't mind bumping SONAME.
Reported in #528.
|
|
Right now, if you're already in a session and call CreateSession, we
return information about the current session of yours. This is highy
confusing and a nasty hack. Avoid that, and instead return a commonly
known error, so the caller can detect that.
This has the side-effect, that we no longer override XDG_VTNR and XDG_SEAT
in pam_systemd, if you're already in a session. But this sounds like the
right thing to do, anyway.
|
|
|
|
Right now, we never install destination matches on kdbus as the kernel did
not support MATCH rules on those. With the introduction of
KDBUS_ITEM_DST_ID we can now match on destination IDs, so add explicit
support for those.
This requires a recent kdbus module to work. However, there seems to be no
user-space that uses "Destination=''" matches, yet, so old kdbus modules
still work fine (we couldn't find any real user).
This is needed to match on unicast signals in bus-proxy. A followup will
add support for this.
|
|
|
|
sd-bus: introduce new sd_bus_flush_close_unref() call
|
|
Running `busctl monitor` currently buffers data for several seconds /
kilobytes before writing stdout. This is highly confusing if you dump in a
file, ^C busctl and then end up with a file with data of the last few
_seconds_ missing.
Fix this by explicitly flushing after each signal.
|
|
sd_bus_flush_close_unref() is a call that simply combines sd_bus_flush()
(which writes all unwritten messages out) + sd_bus_close() (which
terminates the connection, releasing all unread messages) +
sd_bus_unref() (which frees the connection).
The combination of this call is used pretty frequently in systemd tools
right before exiting, and should also be relevant for most external
clients, and is hence useful to cover in a call of its own.
Previously the combination of the three calls was already done in the
_cleanup_bus_close_unref_ macro, but this was only available internally.
Also see #327
|
|
When we get notifications from the kernel, we always turn them into
synthetic dbus1 messages. This means, we do *not* consume the kdbus
message, and as such have to free the offset.
Right now, the translation-helpers told the caller that they consumed the
message, which is wrong. Fix this by explicitly releasing all kernel
messages that are translated.
|
|
Though currently unused by us, netlink attribute types support embedding flags to indicate
if the type is encoded in network byte-order and if it is a nested attribute. Read out
these flags when parsing the message.
We will now swap the byteorder in case it is non-native when reading out integers (though
this is not needed by any of the types we currently support). We do not enforce the NESTED
flag, as the kernel gets this wrong in many cases.
|
|
This was a left-over from before we supported containers.
|
|
Instead of representing containers as several arrays, make a new
netlink_container struct and keep one array of these structs. We
also introduce netlink_attribute structs that in the future will
hold meta-information about each atribute.
|
|
Also rename from rtnl_* to netlink_*.
|
|
This was an oversight, they are no different from regular containers in this respect.
|
|
The kernel bonding layer allows passing an array of ARP IP targets as
bond-configuration. Due to the weird implementation of arrays in netlink
(which we haven't figure out a generic way to support, yet), we usually
hard-code the supported array-sizes. However, this should not be exported
from sd-netlink.
Instead, make sure the caller just uses it's current hack of enumerating
the types, and the sd-netlink core will have it's own list of supported
array-sizes (to be removed in future extensions, btw!). If either does not
match, we will just return a normal error.
Note that we provide 2 constants for ARP_IP_TARGETS_MAX now. However, both
have very different reasons:
- the constant in netdev-bond.c is used to warn the user that the given
number of targets might not be supported by the kernel (even though the
kernel might increase that number at _any_ time)
- the constant in sd-netlink is solely used due to us missing a proper
array implementation. Once that's supported in the type-system, it can
be removed without notice
Last but not least, this patch turns the log_error() into a log_warning().
Given that the previous condition was off-by-one, anyway, it never hit at
the right time. Thus, it was probably of no real use.
|
|
Explicitly export the root type-system to the type-system callers. This
avoids treating NULL as root, which for one really looks backwards (NULL
is usually a leaf, not root), and secondly prevents us from properly
debugging calling into non-nested types.
Also rename the root to "type_system_root". Once we support more than
rtnl, well will have to revisit that, anyway.
|
|
Empty type-systems are just fine. Avoid the nasty hack in
union-type-systems that treat empty type-systems as invalid. Instead check
for the actual types-array and make sure it's non-NULL (which is even true
for empty type-systems, due to "empty_types" array).
|
|
In sd-netlink-message, we always guarantee that the currently selected
type-system is non-NULL. Otherwise, we would be unable to parse any types
in the current container level. Hence, this assertion must be true:
message->container_type_system[m->n_containers] != NULL
During message_new() we currently do not verify that this assertion is
true. Instead, we blindly access nl_type->type_system and use it (which
might be NULL for basic types and unions). Fix this, by explicitly
checking that the root-level type is nested.
Note that this is *not* a strict requirement of netlink, but it's a strict
requirement for all message types we currently support. Furthermore, all
the callers of message_new() already verify that only supported types are
passed, therefore, this is a pure cosmetic check. However, it might be
needed on the future, so make sure we don't trap into this once we change
the type-system.
|
|
The NETLINK_TYPE_META pseudo-type is actually equivalent to an empty
nested type. Drop it and define an empty type-system instead.
This also has the nice side-effect that m->container_type_system[0] is
never NULL (which has really nasty side-effects if you try to read
attributes).
|
|
Right now we store the maximum type-ID of a type-system. This prevents us
from creating empty type-systems. Store the "count" instead, which should
be treated as max+1.
Note that type_system_union_protocol_get_type_system() currently has a
nasty hack to treat empty type-systems as invalid. This might need some
modification later on as well.
|
|
size_t is usually 64bit and int 32bit on a 64bit machine. This probably
does not matter for netlink message sizes, but nevertheless, avoid
hard-coding it anywhere.
|
