| Age | Commit message (Collapse) | Author |
|---|
|
sd-netlink: add tunnel parameters
|
|
Instead of open-coding, use isempty() to check NULL or empty string
for consistency.
|
|
|
|
This adds test-bus-proxy which should be used to test correct behavior of
systemd-bus-proxyd. The first test that was added is to verify we actually
receive NameAcquired signals for ourselves on bus-connect.
|
|
If the caller does not specify arg1 for NameOwnerChanged matches, we
really must take the ID from arg2 or arg3, if provided. They are
guaranteed to be identical to arg1 if either is supplied, but there is no
strict requiredment that arg1 is supplied. Hence, make sure to always
take the more restrictive match. Otherwise, we install rather wide
matches without anyone requiring them.
|
|
Make sure we don't install NameOwnerChanged matches if the caller passed
a destination='' match (except if it is the broadcast address). Per spec,
all NameOwnerChanged signals are broadcasts.
Only the NameLost/NameAcquired signals are unicasts, but those are never
received through sd-bus. Instead, the bus-proxy synthesizes them and it
already installs proper matches for them.
|
|
Make sure we actually parse "unsigned long long" if we encode a uint64_t.
Otherwise, we will get random data from the stack.
|
|
In gvariant, all fixed-size objects need to be sized a multiple of their
alignment. If a structure has only fixed-size members, it is required to
be fixed size itself. If you imagine a structure like (ty), you have an
8-byte member followed by an 1-byte member. Hence, the overall inner-size
is 9. The alignment of the object is 8, though. Therefore, the specs
mandates final padding after fixed-size structures, to make sure it's
sized a multiple of its alignment (=> 16).
On the gvariant decoder side, we already account for this in
bus_gvariant_get_size(), as we apply overall padding to the size of the
structure. Therefore, our decoder correctly skips such final padding when
parsing fixed-size structure.
On the gvariant encoder side, however, we don't account for this final
padding. This patch fixes the structure and dict-entry encoders to
properly place such padding at the end of non-uniform fixed-size
structures.
The problem can be easily seen by running:
$ busctl --user monitor
and
$ busctl call --user org.freedesktop.systemd1 / org.foobar foobar "(ty)" 777 8
The monitor will fail to parse the message and print an error. With this
patch applied, everything works fine again.
This patch also adds a bunch of test-cases to force non-uniform
structures with non-pre-aligned positions.
Thanks to Jan Alexander Steffens <jan.steffens@gmail.com> for spotting
this and narrowing it down to non-uniform gvariant structures. Fixes #597.
|
|
So right now our object-tree is limited to 2 levels at most
('/' and '/foo/...../bar'). We never link any intermediate levels, even
though that was clearly the plan. Fix the bus_node_allocate() helper to
actually link all intermediate nodes, too, not just the root node.
This fixes a simple inverse ptr-diff bug.
The downside of this fix is that we clearly never tested (nor used) the
object tree in any way. The only reason that the introspection works is
that our enumerators shortcut the object tree.
Lets see whether that code actually works..
Thanks to: Nathaniel McCallum <nathaniel@themccallums.org>
..for reporting this. See #524 for an actual example code.
|
|
It is highly confusing if a getter function returns 0, but the value is
set to NULL. This, right now, triggers assertions as code relies on the
returned values to be non-NULL.
Like with sd-bus-creds and friends, return 0 only if a value is actually
available.
Discussed with Tom, and actually fixes real bugs as in #512.
|
|
This merges:
sd-netlink: respect attribute type flags
..fixing a conflict due to a typo fix.
|
|
We were ignoring failures from unhexchar, which meant that invalid
hex characters were being turned into garbage rather than the string
rejected.
Fix this by making unhexmem return an error code, also change the API
slightly, to return the size of the returned memory, reflecting the
fact that the memory is a binary blob,and not a string.
For convenience, still append a trailing NULL byte to the returned
memory (not included in the returned size), allowing callers to
treat it as a string without doing a second copy.
|
|
sd-bus: include queried path in GetManagedObjects
|
|
If GetManagedObjects is called on /foo/bar, then it should also include
the object /foo/bar, if it exists. Right now, we only include objects
underneath /foo/bar/.
This follows the behavior of existing dbus implementations.
Obsoletes #527 and fixes #525. Reported by: Nathaniel McCallum
|
|
All other *_get_description() functions use 'const char**', so make sure
sd_bus_slot_get_description() does the same.
This changes API, but ABI stays stable. I think this is fine, but I
wouldn't mind bumping SONAME.
Reported in #528.
|
|
Right now, if you're already in a session and call CreateSession, we
return information about the current session of yours. This is highy
confusing and a nasty hack. Avoid that, and instead return a commonly
known error, so the caller can detect that.
This has the side-effect, that we no longer override XDG_VTNR and XDG_SEAT
in pam_systemd, if you're already in a session. But this sounds like the
right thing to do, anyway.
|
|
|
|
Right now, we never install destination matches on kdbus as the kernel did
not support MATCH rules on those. With the introduction of
KDBUS_ITEM_DST_ID we can now match on destination IDs, so add explicit
support for those.
This requires a recent kdbus module to work. However, there seems to be no
user-space that uses "Destination=''" matches, yet, so old kdbus modules
still work fine (we couldn't find any real user).
This is needed to match on unicast signals in bus-proxy. A followup will
add support for this.
|
|
|
|
sd-bus: introduce new sd_bus_flush_close_unref() call
|
|
Running `busctl monitor` currently buffers data for several seconds /
kilobytes before writing stdout. This is highly confusing if you dump in a
file, ^C busctl and then end up with a file with data of the last few
_seconds_ missing.
Fix this by explicitly flushing after each signal.
|
|
sd_bus_flush_close_unref() is a call that simply combines sd_bus_flush()
(which writes all unwritten messages out) + sd_bus_close() (which
terminates the connection, releasing all unread messages) +
sd_bus_unref() (which frees the connection).
The combination of this call is used pretty frequently in systemd tools
right before exiting, and should also be relevant for most external
clients, and is hence useful to cover in a call of its own.
Previously the combination of the three calls was already done in the
_cleanup_bus_close_unref_ macro, but this was only available internally.
Also see #327
|
|
When we get notifications from the kernel, we always turn them into
synthetic dbus1 messages. This means, we do *not* consume the kdbus
message, and as such have to free the offset.
Right now, the translation-helpers told the caller that they consumed the
message, which is wrong. Fix this by explicitly releasing all kernel
messages that are translated.
|
|
Though currently unused by us, netlink attribute types support embedding flags to indicate
if the type is encoded in network byte-order and if it is a nested attribute. Read out
these flags when parsing the message.
We will now swap the byteorder in case it is non-native when reading out integers (though
this is not needed by any of the types we currently support). We do not enforce the NESTED
flag, as the kernel gets this wrong in many cases.
|
|
This was a left-over from before we supported containers.
|
|
Instead of representing containers as several arrays, make a new
netlink_container struct and keep one array of these structs. We
also introduce netlink_attribute structs that in the future will
hold meta-information about each atribute.
|
|
Also rename from rtnl_* to netlink_*.
|
|
This was an oversight, they are no different from regular containers in this respect.
|
|
The kernel bonding layer allows passing an array of ARP IP targets as
bond-configuration. Due to the weird implementation of arrays in netlink
(which we haven't figure out a generic way to support, yet), we usually
hard-code the supported array-sizes. However, this should not be exported
from sd-netlink.
Instead, make sure the caller just uses it's current hack of enumerating
the types, and the sd-netlink core will have it's own list of supported
array-sizes (to be removed in future extensions, btw!). If either does not
match, we will just return a normal error.
Note that we provide 2 constants for ARP_IP_TARGETS_MAX now. However, both
have very different reasons:
- the constant in netdev-bond.c is used to warn the user that the given
number of targets might not be supported by the kernel (even though the
kernel might increase that number at _any_ time)
- the constant in sd-netlink is solely used due to us missing a proper
array implementation. Once that's supported in the type-system, it can
be removed without notice
Last but not least, this patch turns the log_error() into a log_warning().
Given that the previous condition was off-by-one, anyway, it never hit at
the right time. Thus, it was probably of no real use.
|
|
Explicitly export the root type-system to the type-system callers. This
avoids treating NULL as root, which for one really looks backwards (NULL
is usually a leaf, not root), and secondly prevents us from properly
debugging calling into non-nested types.
Also rename the root to "type_system_root". Once we support more than
rtnl, well will have to revisit that, anyway.
|
|
Empty type-systems are just fine. Avoid the nasty hack in
union-type-systems that treat empty type-systems as invalid. Instead check
for the actual types-array and make sure it's non-NULL (which is even true
for empty type-systems, due to "empty_types" array).
|
|
In sd-netlink-message, we always guarantee that the currently selected
type-system is non-NULL. Otherwise, we would be unable to parse any types
in the current container level. Hence, this assertion must be true:
message->container_type_system[m->n_containers] != NULL
During message_new() we currently do not verify that this assertion is
true. Instead, we blindly access nl_type->type_system and use it (which
might be NULL for basic types and unions). Fix this, by explicitly
checking that the root-level type is nested.
Note that this is *not* a strict requirement of netlink, but it's a strict
requirement for all message types we currently support. Furthermore, all
the callers of message_new() already verify that only supported types are
passed, therefore, this is a pure cosmetic check. However, it might be
needed on the future, so make sure we don't trap into this once we change
the type-system.
|
|
The NETLINK_TYPE_META pseudo-type is actually equivalent to an empty
nested type. Drop it and define an empty type-system instead.
This also has the nice side-effect that m->container_type_system[0] is
never NULL (which has really nasty side-effects if you try to read
attributes).
|
|
Right now we store the maximum type-ID of a type-system. This prevents us
from creating empty type-systems. Store the "count" instead, which should
be treated as max+1.
Note that type_system_union_protocol_get_type_system() currently has a
nasty hack to treat empty type-systems as invalid. This might need some
modification later on as well.
|
|
size_t is usually 64bit and int 32bit on a 64bit machine. This probably
does not matter for netlink message sizes, but nevertheless, avoid
hard-coding it anywhere.
|
|
Same as NLType, move NLTypeSystem into netlink-types.c and hide it from
the outside. Provide an accessor function for the 'max' field that is used
to allocate suitable array sizes.
Note that this will probably be removed later on, anyway. Once we support
bigger type-systems, it just seems impractical to allocate such big arrays
for each container entry. An RBTree would probably do just fine.
|
|
If we extend NLType to support arrays and further extended types, we
really want to avoid hard-coding the type-layout outside of
netlink-types.c. We already avoid accessing nl_type->type_system outside
of netlink-types.c, extend this to also avoid accessing any other fields.
Provide accessor functions for nl_type->type and nl_type->size and then
move NLType away from the type-system header.
With this in place, follow-up patches can safely turn "type_system" and
"type_system_union" into a real "union { }", and then add another type for
arrays.
|
|
Make sure we never access type->type_system or type->type_system_union
directly. This is an implementation detail of the type-system and we
should always use the accessors. Right now, they only exist for 2-level
accesses (type-system to type-system). This patch introduces the 1-level
accessors (type to type-system) and makes use of it.
This patch makes sure the proper assertions are in place, so we never
accidentally access sub-type-systems for non-nested/union types.
Note that this places hard-asserts on the accessors. This should be fine,
as we expect callers to only access sub type-systems if they *know*
they're dealing with nested types.
|
|
The NLA_ names are used to name real datatypes we extract out of netlink
messages. The kernel has an internal enum with the same names
(NLA_foobar), which is *NOT* binary compatible to our types. Furthermore,
we support a different set of types than the kernel (as we try to treat
some kernel peculiarities as our own types to simplify the API).
Rename NLA_ to NETLINK_TYPE_ to make clear that this is our own set of
types.
|
|
This fully synchronizes the content of a "make dist" and a "git archive"
tar ball.
http://lists.freedesktop.org/archives/systemd-devel/2015-June/033214.html
|
|
Fixes #306.
|
|
In kdbus we still have to support org.freedesktop.DBus matches even though
there is no real bus driver. The reason is that bus-control.c turns
NameOwnerChanged matches into proper kdbus matches. If we drop DRIVER
matches early, we will never match on name-changes for kdbus.
Two ways to fix this:
1) Install DRIVER matches on kdbus (which is the simple way our and which
is what this patch does).
2) Properly fix the scope-detection to let NameOwnerChanged matches
through (or better: block anything with Member!=NameOwnerChanged).
|
|
./configure --enable/disable-kdbus can be used to set the default
behavior regarding kdbus.
If no kdbus kernel support is available, dbus-dameon will be used.
With --enable-kdbus, the kernel command line option "kdbus=0" can
be used to disable kdbus.
With --disable-kdbus, the kernel command line option "kdbus=1" is
required to enable kdbus support.
|
|
|
|
Stop talking about the "XDG" version of basename()
|
|
XDG refers to X Desktop Group, a former name for freedesktop.org.
This group is responsible for specifications like basedirs,
.desktop files and icon naming, but as far as I know, it has never
tried to redefine basename().
I think these references were meant to say XPG (X/Open Portability
Guide), a precursor of POSIX. POSIX is better-known and less easily
confused with XDG, and is how the basename(3) man page describes
the libgen.h version of basename().
The other version of basename() is glibc-specific and is described
in basename(3) as "the GNU version"; specifically mention that
version, to disambiguate.
|
|
sd-bus: suppress installing local bus matches server side
|
|
Matches that can only match against messages from the
org.freedesktop.DBus.Local service (or the local interfaces or path)
should never be installed server side, suppress them hence.
Similar, on kdbus matches that can only match driver messages shouldn't
be passed to the kernel.
|
|
sd-event: make errors on EPOLL_CTL_DEL pseudo-fatal
|
|
If we call EPOLL_CTL_DEL, we *REALLY* expect the file-descriptor to be
present in that given epoll-set. We actually track such state via our
s->io.registered flag, so it better be true.
Make sure if that's not true, we treat it similar to assert_return() (ie.,
print a loud warning).
|
