| Age | Commit message (Collapse) | Author |
|---|
|
|
|
Accept both files with and without trailing newlines. Apparently some rkt
releases generated them incorrectly, missing the trailing newlines, and we
shouldn't break that.
|
|
service is running
This adds a new boolean setting DynamicUser= to service files. If set, a new
user will be allocated dynamically when the unit is started, and released when
it is stopped. The user ID is allocated from the range 61184..65519. The user
will not be added to /etc/passwd (but an NSS module to be added later should
make it show up in getent passwd).
For now, care should be taken that the service writes no files to disk, since
this might result in files owned by UIDs that might get assigned dynamically to
a different service later on. Later patches will tighten sandboxing in order to
ensure that this cannot happen, except for a few selected directories.
A simple way to test this is:
systemd-run -p DynamicUser=1 /bin/sleep 99999
|
|
If the return parameter is NULL, simply validate the string, and return no
error.
|
|
|
|
We currently have code to read and write files containing UUIDs at various
places. Unify this in id128-util.[ch], and move some other stuff there too.
The new files are located in src/libsystemd/sd-id128/ (instead of src/shared/),
because they are actually the backend of sd_id128_get_machine() and
sd_id128_get_boot().
In follow-up patches we can use this reduce the code in nspawn and
machine-id-setup by adopted the common implementation.
|
|
It's a bit easier to read because shorter. Also, most likely a tiny bit faster.
|
|
|
|
|
|
|
|
sd_event_get_iteration() (#3631)
This extends the existing event loop iteration counter to 64bit, and exposes it
via a new function sd_event_get_iteration(). This is helpful for cases like
issue #3612. After all, since we maintain the counter anyway, we might as well
expose it.
(This also fixes an unrelated issue in the man page for sd_event_wait() where
micro and milliseconds got mixed up)
|
|
sd-device: handle the 'drivers' pseudo-subsystem correctly
|
|
The loop on bus_match_run should break and return immediately if
bus->match_callbacks_modified is true. Otherwise the loop may access
free'd data.
|
|
We support writing out tags and db files in case a real subsystem called
'drivers' exists, so there is no reason to refuse parsing it.
|
|
The 'drivers' pseudo-subsystem needs special treatment. These pseudo-devices are
found under /sys/bus/drivers/, so needs the real subsystem encoded
in the device_id in order to be resolved.
The reader side already assumed this to be the case.
|
|
Collect the errors and return to the caller, but continue enumerating all devices.
|
|
the pager (#3550)
If "systemctl -H" is used, let's make sure we first terminate the bus
connection, and only then close the pager. If done in this order ssh will get
an EOF on stdin (as we speak D-Bus through ssh's stdin/stdout), and then
terminate. This makes sure the standard error we were invoked on is released by
ssh, and only that makes sure we don't deadlock on the pager which waits for
all clients closing its input pipe.
(Similar fixes for the various other xyzctl tools that support both pagers and
-H)
Fixes: #3543
|
|
|
|
Super-important change, yeah!
|
|
put limits on addresses and routers per link and per network
|
|
timestamping improvements and IPv6 RA revamp
|
|
On larger systems we might very well see messages with thousands of parts.
When we free them, we must avoid recursing into each part, otherwise we
very likely get stack overflows.
Fix sd_netlink_message_unref() to use an iterative approach rather than
recursion (also avoid tail-recursion in case it is not optimized by the
compiler).
|
|
|
|
Drop weird "const" usage, and use size_t for sizes.
|
|
* udevadm-info: use _cleanup_
* udevadm-info: propagate return value from export_devices()
* sd-device: add comment and remove unnecessary braces
|
|
The statemachine was unable to parse properties with empty values,
reported in [0].
When reaching the start of the KEY, we would unconditionally read
one more character before starting to look for the end-of-line.
Simply look for the end-of-line from the first character.
[0]: <https://bugzilla.redhat.com/show_bug.cgi?id=1338823>
|
|
Also adjust indentation in various places.
|
|
This is now the recommended way to do monitoring by upstream D-Bus.
It's also allowed in the default policy, whereas eavesdrop is not
anymore, which effectively broke busctl on many systems.
|
|
That function doesn't draw anything on it's own, just returns a string, which
sometimes is more than one character. Also remove "DRAW_" prefix from character
names, TREE_* and ARROW and BLACK_CIRCLE are unambigous on their own, don't
draw anything, and are always used as an argument to special_glyph().
Rename "DASH" to "MDASH", as there's more than one type of dash.
|
|
The macro determines the right length of a AF_UNIX "struct sockaddr_un" to pass to
connect() or bind(). It automatically figures out if the socket refers to an
abstract namespace socket, or a socket in the file system, and properly handles
the full length of the path field.
This macro is not only safer, but also simpler to use, than the usual
offsetof() + strlen() logic.
|
|
Introduce
1. sd_rtnl_message_route_set_table to set table ID
2. sd_rtnl_message_route_set_family to set family
Both required to configure route properties.
|
|
Also remove the braces add_rtattr not required.
|
|
rework "journalctl -M"
|
|
* sd-netlink: permit RTM_DELLINK messages with no ifindex
This is useful for removing network interfaces by name.
* nspawn: explicitly remove veth links we created after use
Sometimes the kernel keeps veth links pinned after the namespace they have been
joined to died. Let's hence explicitly remove veth links after use.
Fixes: #2173
|
|
Also, expose this via the "journalctl --file=-" syntax for STDIN. This feature
remains undocumented though, as it is probably not too useful in real-life as
this still requires fds that support mmaping and seeking, i.e. does not work
for pipes, for which reading from STDIN is most commonly used.
|
|
Before we invoke now(CLOCK_BOOTTIME), let's make sure we actually have that
clock, since now() will otherwise hit an assert.
Specifically, let's refuse CLOCK_BOOTTIME early in sd-event if the kernel
doesn't actually support it.
This is a follow-up for #3037, and specifically:
https://github.com/systemd/systemd/pull/3037#issuecomment-210199167
|
|
|
|
|
|
(#3037)
It was added in 2.6.39, and causes an assertion to fail when running in mock
hosted on 2.6.32-based RHEL-6:
Assertion 'clock_gettime(map_clock_id(clock_id), &ts) == 0' failed at systemd/src/basic/time-util.c:70, function now(). Aborting.
|
|
|
|
If the SD_BUS_CREDS_SUPPLEMENTARY_GIDS value is requested, the pid is
queried to find out the supplementary gids value from /proc/pid/status.
Otherwise sd_bus_creds_get_supplementary_gids() won't work unless some
other value in mask triggered fetching the pid information.
|
|
be enabled
We don't allow using config symlinks to enable units, but the error message we
printed was awful. Fix that, and generate a more readable error.
Fixes #3010.
|
|
numbers
And port all code over to use it.
|
|
Let's be precise when the user tries to invoke an "enable" operation on a
generated unit file.
|
|
CID #1338424.
|
|
Fix commit 1d88a2: We need to allocate another byte for building the "tags"
string, as we append an extra ':' and still need the NUL terminator.
|
|
Add a test for nss modules and some related fixes
|
|
strjoina() is unsafe to be used in an unbounded loop as alloca() has no error
reporting. Thus devices with a large number of tags or devlinks trigger a
segfault in device_properties_prepare() due to overflowing the stack.
Rewrite the building of the "tags" and "devlinks" strings using
GREEDY_REALLOC() and strpcpy() to work with arbitrarily long strings. This also
avoids re-copying the entire string in each loop iteration.
Before this commit we always appended one final ":" to "tags". Change this to
start with an iniital ":" and for each tag append instead of prepend a ":".
This unifies what happens for the first and all subsequent tags so that we can
use a for loop.
Fixes #2954
|
|
|
|
|
