| Age | Commit message (Collapse) | Author |
|---|
|
This way we can reuse it other code thatn just localectl/localed +
timedatectl/timedated.
|
|
|
|
|
|
attached to a bus connection
This makes callback behaviour more like sd-event or sd-resolve, and
creates proper object for unregistering callbacks.
Taking the refernce to the slot is optional. If not taken life time of
the slot will be bound to the underlying bus object (or in the case of
an async call until the reply has been recieved).
|
|
first (or second)
Previously the returned object of constructor functions where sometimes
returned as last, sometimes as first and sometimes as second parameter.
Let's clean this up a bit. Here are the new rules:
1. The object the new object is derived from is put first, if there is any
2. The object we are creating will be returned in the next arguments
3. This is followed by any additional arguments
Rationale:
For functions that operate on an object we always put that object first.
Constructors should probably not be too different in this regard. Also,
if the additional parameters might want to use varargs which suggests to
put them last.
Note that this new scheme only applies to constructor functions, not to
all other functions. We do give a lot of freedom for those.
Note that this commit only changes the order of the new functions we
added, for old ones we accept the wrong order and leave it like that.
|
|
|
|
|
|
With this change a failing event source handler will not cause the
entire event loop to fail. Instead, we just disable the specific event
source, log a message at debug level and go on.
This also introduces a new concept of "exit code" which can be stored in
the event loop and is returned by sd_event_loop(). We also rename "quit"
to "exit" everywhere else.
Altogether this should make things more robus and keep errors local
while still providing a way to return event loop errors in a clear way.
|
|
|
|
flags conversion
|
|
that are closer to kdbus
This turns around DO_NOT_QUEUE into QUEUE which implies a more useful
default. (And negative options are awful anyway.)
|
|
Adds a new call sd_event_set_watchdog() that can be used to hook up the
event loop with the watchdog supervision logic of systemd. If enabled
and $WATCHDOG_USEC is set the event loop will ping the invoking systemd
daemon right after coming back from epoll_wait() but not more often than
$WATCHDOG_USEC/4. The epoll_wait() will sleep no longer than
$WATCHDOG_USEC/4*3, to make sure the service manager is called in time.
This means that setting WatchdogSec= in a .service file and calling
sd_event_set_watchdog() in your daemon is enough to hook it up with the
watchdog logic.
|
|
Introduces a new concept of "trusted" vs. "untrusted" busses. For the
latter libsystemd-bus will automatically do per-method access control,
for the former all access is automatically granted. Per-method access
control is encoded in the vtables: by default all methods are only
accessible to privileged clients. If the SD_BUS_VTABLE_UNPRIVILEGED flag
is set for a method it is accessible to unprivileged clients too. By
default whether a client is privileged is determined via checking for
its CAP_SYS_ADMIN capability, but this can be altered via the
SD_BUS_VTABLE_CAPABILITY() macro that can be ORed into the flags field
of the method.
Writable properties are also subject to SD_BUS_VTABLE_UNPRIVILEGED and
SD_BUS_VTABLE_CAPABILITY() for controlling write access to them. Note
however that read access is unrestricted, as PropertiesChanged messages
might send out the values anyway as an unrestricted broadcast.
By default the system bus is set to "untrusted" and the user bus is
"trusted" since per-method access control on the latter is unnecessary.
On dbus1 busses we check the UID of the caller rather than the
configured capability since the capability cannot be determined without
race. On kdbus the capability is checked if possible from the attached
meta-data of a message and otherwise queried from the sending peer.
This also decorates the vtables of the various daemons we ship with
these flags.
|
|
other calls
Instead of returning an enum of return codes, make them return error
codes like kdbus does internally.
Also, document this behaviour so that clients can stick to it.
(Also rework bus-control.c to always have to functions for dbus1 vs.
kernel implementation of the various calls.)
|
|
Message handler callbacks can be simplified drastically if the
dispatcher automatically replies to method calls if errors are returned.
Thus: add an sd_bus_error argument to all message handlers. When we
dispatch a message handler and it returns negative or a set sd_bus_error
we send this as message error back to the client. This means errors
returned by handlers by default are given back to clients instead of
rippling all the way up to the event loop, which is desirable to make
things robust.
As a side-effect we can now easily turn the SELinux checks into normal
function calls, since the method call dispatcher will generate the right
error replies automatically now.
Also, make sure we always pass the error structure to all property and
method handlers as last argument to follow the usual style of passing
variables for return values as last argument.
|
|
|
|
Before, X11 keymap fr-pc105-oss would be converted to fr,
even though fr-oss exists. Now, if
/usr/lib/kbd/keymaps/xkb/<layout>[-<variant>].map[.gz] exists,
<layout>[-<variant>] will be used as the console keymap,
falling back to the legacy mappings otherwise.
% sudo localectl set-x11-keymap pl pc105
% localectl
System Locale: LANG=en_US.UTF-8
VC Keymap: pl (was pl2 before)
X11 Layout: pl
X11 Model: pc105
% sudo localectl set-x11-keymap fr pc105 oss
% localectl
System Locale: LANG=en_US.UTF-8
VC Keymap: fr-oss (was fr before)
X11 Layout: fr
X11 Model: pc105
X11 Variant: oss
% sudo localectl set-x11-keymap fr pc105
% localectl
System Locale: LANG=en_US.UTF-8
VC Keymap: fr
X11 Layout: fr
X11 Model: pc105
% sudo localectl set-x11-keymap gb
% localectl
System Locale: LANG=en_US.UTF-8
VC Keymap: gb (was uk before)
X11 Layout: gb
|
|
|
|
everywhere
We want to emphasize bus connections as per-thread communication
primitives, hence introduce a concept of a per-thread default bus, and
make use of it everywhere.
|
|
it everywhere
Try to emphasize a bit that there should be a mapping between event
loops and threads, hence introduce a logic that there's one "default"
event loop for each thread, that can be queried via
"sd_event_default()".
|
|
The call is one of the most important ones we expose, where we place
major emphasis on. We should make sure to give it a short, memorable
name.
|
|
|
|
Otherwise sd_bus_emit_properties_changed() will refuse sending out
change signals
|
|
|
|
|
|
Fixes minor leak in error path in device.c.
|
|
Just {} is used in a lot of places now, and there's nothing
special abose those few.
|
|
Before, we would initialize many fields twice: first
by filling the structure with zeros, and then a second
time with the real values. We can let the compiler do
the job for us, avoiding one copy.
A downside of this patch is that text gets slightly
bigger. This is because all zero() calls are effectively
inlined:
$ size build/.libs/systemd
text data bss dec hex filename
before 897737 107300 2560 1007597 f5fed build/.libs/systemd
after 897873 107300 2560 1007733 f6075 build/.libs/systemd
… actually less than 1‰.
A few asserts that the parameter is not null had to be removed. I
don't think this changes much, because first, it is quite unlikely
for the assert to fail, and second, an immediate SEGV is almost as
good as an assert.
|
|
Implement this with a proper state machine, so that newlines and
escaped chars can appear in string assignments. This should bring the
parser much closer to shell.
|
|
This is a followup to: commit 1a37b9b9043ef83e9900e460a9a1fccced3acf89
It will fix denial messages from dbus-daemon between gdm and
systemd-logind on logging into GNOME due to this.
See the previous commit for more details.
|
|
Also split out some fileio functions to fileio.c and provide a SELinux
aware pendant in fileio-label.c
see https://bugzilla.redhat.com/show_bug.cgi?id=881577
|
|
|
|
Now, actually check if the environment variable names and values used
are valid, before accepting them. With this in place are at some places
more rigid than POSIX, and less rigid at others. For example, this code
allows lower-case environment variables (which POSIX suggests not to
use), but it will not allow non-UTF8 variable values.
All in all this should be a good middle ground of what to allow and what
not to allow as environment variables.
(This also splits out all environment related calls into env-util.[ch])
|
|
Use mkdir_p_label instead of mkdir_parents_label, so that the final
directory component is created too.
|
|
|
|
|
|
|
|
also a number of minor fixups and bug fixes: spelling, oom errors
that didn't print errors, not properly forwarding error codes,
few more consistency issues, et cetera
|
|
glibc/glib both use "out of memory" consistantly so maybe we should
consider that instead of this.
Eliminates one string out of a number of binaries. Also fixes extra newline
in udev/scsi_id
|
|
context
|
|
We finally got the OK from all contributors with non-trivial commits to
relicense systemd from GPL2+ to LGPL2.1+.
Some udev bits continue to be GPL2+ for now, but we are looking into
relicensing them too, to allow free copy/paste of all code within
systemd.
The bits that used to be MIT continue to be MIT.
The big benefit of the relicensing is that closed source code may now
link against libsystemd-login.so and friends.
|
|
Only 34 of 74 tools need libselinux linked, and libselinux is a pain
with its unconditional library constructor.
|
|
|
|
The way the various properties[] arrays are initialized is inefficient:
- only the .data members change at runtime, yet the whole arrays of
properties with all the fields are constructed on the stack one by
one by the code.
- there's duplication, eg. the properties of "org.freedesktop.systemd1.Unit"
are repeated in several unit types.
Fix it by moving the information about properties into static const
sections. Instead of storing the .data directly in the property, store
a constant offset from a run-time base.
The small arrays of struct BusBoundProperties bind together the constant
information with the right runtime information (the base pointer).
On my system the code shrinks by 60 KB, data increases by 10 KB.
|
|
|
