| Age | Commit message (Collapse) | Author |
|---|
|
|
|
It does not use any functions from libcap directly. The CAP_SYS_ADMIN constant
in use by this file comes from <linux/capability.h> imported through "missing.h".
Tested that "systemd-localed" builds cleanly and works after this change.
|
|
resulting name is actually valid
Also, rename filename_is_safe() to filename_is_valid(), since it
actually does a full validation for what the kernel will accept as file
name, it's not just a heuristic.
|
|
The errors are prefixed with "libxkbcommon" to provide some context,
because they are quite confusing without it. With the prefix, we at
least know where they come from.
|
|
Using:
find . -name '*.[ch]' | while read f; do perl -i.mmm -e \
'local $/;
local $_=<>;
s/(if\s*\([^\n]+\))\s*{\n(\s*)(log_[a-z_]*_errno\(\s*([->a-zA-Z_]+)\s*,[^;]+);\s*return\s+\g4;\s+}/\1\n\2return \3;/msg;
print;'
$f
done
And a couple of manual whitespace fixups.
|
|
Basically:
find . -name '*.[ch]' | while read f; do perl -i.mmm -e \
'local $/;
local $_=<>;
s/log_(debug|info|notice|warning|error|emergency)\("([^"]*)%s"([^;]*),\s*strerror\(-?([->a-zA-Z_]+)\)\);/log_\1_errno(\4, "\2%m"\3);/gms;print;' \
$f; done
Plus manual indentation fixups.
|
|
It corrrectly handles both positive and negative errno values.
|
|
As a followup to 086891e5c1 "log: add an "error" parameter to all
low-level logging calls and intrdouce log_error_errno() as log calls
that take error numbers", use sed to convert the simple cases to use
the new macros:
find . -name '*.[ch]' | xargs sed -r -i -e \
's/log_(debug|info|notice|warning|error|emergency)\("(.*)%s"(.*), strerror\(-([a-zA-Z_]+)\)\);/log_\1_errno(-\4, "\2%m"\3);/'
Multi-line log_*() invocations are not covered.
And we also should add log_unit_*_errno().
|
|
Make sure not to run xkb-keymap validation twice if pk-queries are used.
Move it below pk-checks.
|
|
Introduce a new optional dependency on libxkbcommon for systemd-localed.
Whenever the x11 keymap settings are changed, use libxkbcommon to compile
the keymap. If the compilation fails, print a warning so users will get
notified.
On compilation failure, we still update the keymap settings for now. This
patch just introduces the xkbcommon infrastructure to have keymap
validation in place. We can later decide if/how we want to enforce this.
|
|
This should make the unquoting scheme a bit less naive.
|
|
|
|
Other functions in this file follow this pattern,
we have vconsole_write_data and locale_write_data.
|
|
If a user specifies multiple X11 keymaps, with a (at least the first
one) nonempty variant, and we don't match the whole combo, use
a converted keymap which includes the variant in preference to
the default, variantless, keymap.
E.g.: We would convert X11 config "layout=fr variant=mac" to "fr-mac",
but "layout=fr,us variant=mac," to "fr", because we don't have a
converted keymap which would match "fr,us", and we don't have a legacy
mapping for "fr,us". This is unexpected, and if we cannot match both,
it is still better to match the primary mapping and use "fr-mac".
|
|
|
|
Converting X11 to legacy keymaps and back is a fucking mess. Let's
make it at least possible to request detailed logs of what is being
changed and why (LOG_DEBUG level).
At LOG_INFO level, we would log the requested change of X11 or console
keymap, but not the resulting change after conversion to console or X11.
Make sure that every change of configuration on disk has a matching
line in the logs.
|
|
It was mostly a duplicate of free_and_strdup().
|
|
Very unlikely to trigger, but in principle strv_free
could be called twice: once explictly, and once from cleanup.
|
|
The sd_bus_emit_properties_changed() call for x11 keymap changes lacks
commas.. whoops. Fix it! Now localed emits PropertiesChanged signals
again.
|
|
First, let's drop the "bus" argument, we can determine it from the
message anyway.
Secondly, determine the right callback/userdata pair automatically from
what is currently is being dispatched. This should simplify things a lot
for us, since it makes it unnecessary to pass pointers through the
original handlers through all functions when we process messages, which
might require authentication.
|
|
|
|
This is a generalization of the vtable privilege check we already have,
but exported, and hence useful when preparing for a polkit change.
This will deal with the complexity that on dbus1 one cannot trust the
capability field we retrieve via the bus, since it is read via
/proc/$$/stat (and thus might be out-of-date) rather than directly from
the message (like on kdbus) or bus connection (as for uid creds on
dbus1).
Also, port over all code to this new API.
|
|
It's unneccessary, not used, and complicates callers of the
function.
|
|
Since b5eca3a2059f9399d1dc52cbcf9698674c4b1cf0 we don't attempt to GC
busses anymore when unsent messages remain that keep their reference,
when they otherwise are not referenced anymore. This means that if we
explicitly want connections to go away, we need to close them.
With this change we will no do so explicitly wherver we connect to the
bus from a main program (and thus know when the bus connection should go
away), or when we create a private bus connection, that really should go
away after our use.
This fixes connection leaks in the NSS and PAM modules.
|
|
$ systemd-analyze verify trailing-g.service
[./trailing-g.service:2] Trailing garbage, ignoring.
trailing-g.service lacks ExecStart setting. Refusing.
Error: org.freedesktop.systemd1.LoadFailed: Unit trailing-g.service failed to load: Invalid argument.
Failed to create trailing-g.service/start: Invalid argument
|
|
This way we can reuse it other code thatn just localectl/localed +
timedatectl/timedated.
|
|
|
|
|
|
attached to a bus connection
This makes callback behaviour more like sd-event or sd-resolve, and
creates proper object for unregistering callbacks.
Taking the refernce to the slot is optional. If not taken life time of
the slot will be bound to the underlying bus object (or in the case of
an async call until the reply has been recieved).
|
|
first (or second)
Previously the returned object of constructor functions where sometimes
returned as last, sometimes as first and sometimes as second parameter.
Let's clean this up a bit. Here are the new rules:
1. The object the new object is derived from is put first, if there is any
2. The object we are creating will be returned in the next arguments
3. This is followed by any additional arguments
Rationale:
For functions that operate on an object we always put that object first.
Constructors should probably not be too different in this regard. Also,
if the additional parameters might want to use varargs which suggests to
put them last.
Note that this new scheme only applies to constructor functions, not to
all other functions. We do give a lot of freedom for those.
Note that this commit only changes the order of the new functions we
added, for old ones we accept the wrong order and leave it like that.
|
|
|
|
|
|
With this change a failing event source handler will not cause the
entire event loop to fail. Instead, we just disable the specific event
source, log a message at debug level and go on.
This also introduces a new concept of "exit code" which can be stored in
the event loop and is returned by sd_event_loop(). We also rename "quit"
to "exit" everywhere else.
Altogether this should make things more robus and keep errors local
while still providing a way to return event loop errors in a clear way.
|
|
|
|
flags conversion
|
|
that are closer to kdbus
This turns around DO_NOT_QUEUE into QUEUE which implies a more useful
default. (And negative options are awful anyway.)
|
|
Adds a new call sd_event_set_watchdog() that can be used to hook up the
event loop with the watchdog supervision logic of systemd. If enabled
and $WATCHDOG_USEC is set the event loop will ping the invoking systemd
daemon right after coming back from epoll_wait() but not more often than
$WATCHDOG_USEC/4. The epoll_wait() will sleep no longer than
$WATCHDOG_USEC/4*3, to make sure the service manager is called in time.
This means that setting WatchdogSec= in a .service file and calling
sd_event_set_watchdog() in your daemon is enough to hook it up with the
watchdog logic.
|
|
Introduces a new concept of "trusted" vs. "untrusted" busses. For the
latter libsystemd-bus will automatically do per-method access control,
for the former all access is automatically granted. Per-method access
control is encoded in the vtables: by default all methods are only
accessible to privileged clients. If the SD_BUS_VTABLE_UNPRIVILEGED flag
is set for a method it is accessible to unprivileged clients too. By
default whether a client is privileged is determined via checking for
its CAP_SYS_ADMIN capability, but this can be altered via the
SD_BUS_VTABLE_CAPABILITY() macro that can be ORed into the flags field
of the method.
Writable properties are also subject to SD_BUS_VTABLE_UNPRIVILEGED and
SD_BUS_VTABLE_CAPABILITY() for controlling write access to them. Note
however that read access is unrestricted, as PropertiesChanged messages
might send out the values anyway as an unrestricted broadcast.
By default the system bus is set to "untrusted" and the user bus is
"trusted" since per-method access control on the latter is unnecessary.
On dbus1 busses we check the UID of the caller rather than the
configured capability since the capability cannot be determined without
race. On kdbus the capability is checked if possible from the attached
meta-data of a message and otherwise queried from the sending peer.
This also decorates the vtables of the various daemons we ship with
these flags.
|
|
other calls
Instead of returning an enum of return codes, make them return error
codes like kdbus does internally.
Also, document this behaviour so that clients can stick to it.
(Also rework bus-control.c to always have to functions for dbus1 vs.
kernel implementation of the various calls.)
|
|
Message handler callbacks can be simplified drastically if the
dispatcher automatically replies to method calls if errors are returned.
Thus: add an sd_bus_error argument to all message handlers. When we
dispatch a message handler and it returns negative or a set sd_bus_error
we send this as message error back to the client. This means errors
returned by handlers by default are given back to clients instead of
rippling all the way up to the event loop, which is desirable to make
things robust.
As a side-effect we can now easily turn the SELinux checks into normal
function calls, since the method call dispatcher will generate the right
error replies automatically now.
Also, make sure we always pass the error structure to all property and
method handlers as last argument to follow the usual style of passing
variables for return values as last argument.
|
|
|
|
Before, X11 keymap fr-pc105-oss would be converted to fr,
even though fr-oss exists. Now, if
/usr/lib/kbd/keymaps/xkb/<layout>[-<variant>].map[.gz] exists,
<layout>[-<variant>] will be used as the console keymap,
falling back to the legacy mappings otherwise.
% sudo localectl set-x11-keymap pl pc105
% localectl
System Locale: LANG=en_US.UTF-8
VC Keymap: pl (was pl2 before)
X11 Layout: pl
X11 Model: pc105
% sudo localectl set-x11-keymap fr pc105 oss
% localectl
System Locale: LANG=en_US.UTF-8
VC Keymap: fr-oss (was fr before)
X11 Layout: fr
X11 Model: pc105
X11 Variant: oss
% sudo localectl set-x11-keymap fr pc105
% localectl
System Locale: LANG=en_US.UTF-8
VC Keymap: fr
X11 Layout: fr
X11 Model: pc105
% sudo localectl set-x11-keymap gb
% localectl
System Locale: LANG=en_US.UTF-8
VC Keymap: gb (was uk before)
X11 Layout: gb
|
|
|
|
everywhere
We want to emphasize bus connections as per-thread communication
primitives, hence introduce a concept of a per-thread default bus, and
make use of it everywhere.
|
|
it everywhere
Try to emphasize a bit that there should be a mapping between event
loops and threads, hence introduce a logic that there's one "default"
event loop for each thread, that can be queried via
"sd_event_default()".
|
|
The call is one of the most important ones we expose, where we place
major emphasis on. We should make sure to give it a short, memorable
name.
|
|
|
|
Otherwise sd_bus_emit_properties_changed() will refuse sending out
change signals
|
|
|
|
|
