| Age | Commit message (Collapse) | Author |
|---|
|
Mirror conditions from Makefile.am.
|
|
The indentation for emacs'es meson-mode is added .dir-locals.
All files are reindented automatically, using the lasest meson-mode from git.
Indentation should now be fairly consistent.
|
|
With -Dsplit-usr=true, we set rootprefix to /. This leads to //lib/systemd or
//lib/udev for various dir variables. Using join_paths() avoids this.
|
|
... including pkla installation on Debian.
v2:
- fix polkit-gobject-1 pkgconfig name
|
|
Tests can be run with 'ninja-build test' or using 'mesontest'.
'-Dtests=unsafe' can be used to include the "unsafe" tests in the
test suite, same as with autotools.
v2:
- use more conf.get guards are optional components
- declare deps on generated headers for test-{af,arphrd,cap}-list
v3:
- define environment for tests
Most test don't need this, but to be consistent with autotools-based build, and
to avoid questions which tests need it and which don't, set the same environment
for all tests.
v4:
- rework test generation
Use a list of lists to define each test. This way we can reduce the
boilerplate somewhat, although the test listings are still pretty verbose. We
can also move the definitions of the tests to the subdirs. Unfortunately some
subdirs are included earlier than some of the libraries that test binaries
are linked to. So just dump all definitions of all tests that cannot be
defined earlier into src/test. The `executable` definitions are still at the
top level, so the binaries are compiled into the build root.
v5:
- tag test-dnssec-complex as manual
v6:
- fix HAVE_LIBZ typo
- add missing libgobject/libgio defs
- mark test-qcow2 as manual
|
|
It's crucial that we can build systemd using VS2010!
... er, wait, no, that's not the official reason. We need to shed old systems
by requring python 3! Oh, no, it's something else. Maybe we need to throw out
345 years of knowlege accumulated in autotools? Whatever, this new thing is
cool and shiny, let's use it.
This is not complete, I'm throwing it out here for your amusement and critique.
- rules for sd-boot are missing. Those might be quite complicated.
- rules for tests are missing too. Those are probably quite simple and
repetitive, but there's lots of them.
- it's likely that I didn't get all the conditions right, I only tested "full"
compilation where most deps are provided and nothing is disabled.
- busname.target and all .busname units are skipped on purpose.
Otherwise, installation into $DESTDIR has the same list of files and the
autoconf install, except for .la files.
It'd be great if people had a careful look at all the library linking options.
I added stuff until things compiled, and in the end there's much less linking
then in the old system. But it seems that there's still a lot of unnecessary
deps.
meson has a `shared_module` statement, which sounds like something appropriate
for our nss and pam modules. Unfortunately, I couldn't get it to work. For the
nss modules, we need an .so version of '2', but `shared_module` disallows the
version argument. For the pam module, it also didn't work, I forgot the reason.
The handling of .m4 and .in and .m4.in files is rather awkward. It's likely
that this could be simplified. If make support is ever dropped, I think it'd
make sense to switch to a different templating system so that two different
languages and not required, which would make everything simpler yet.
v2:
- use get_pkgconfig_variable
- use sh not bash
- use add_project_arguments
v3:
- drop required:true and fix progs/prog typo
v4:
- use find_library('bz2')
- add TTY_GID definition
- define __SANE_USERSPACE_TYPES__
- use join_paths(prefix, ...) is used on all paths to make them all absolute
v5:
- replace all declare_dependency's with []
- add more conf.get guards around optional components
v6:
- drop -pipe, -Wall which are the default in meson
- use compiler.has_function() and compiler.has_header_symbol instead of the
hand-rolled checks.
- fix duplication in 'liblibsystemd' library name
- use the right .sym file for pam_systemd
- rename 'compiler' to 'cc': shorter, and more idiomatic.
v7:
- use ENABLE_ENVIRONMENT_D not HAVE_ENVIRONMENT_D
- rename prefix to prefixdir, rootprefix to rootprefixdir
("prefix" is too common of a name and too easy to overwrite by mistake)
- wrap more stuff with conf.get('ENABLE...') == 1
- use rootprefix=='/' and rootbindir as install_dir, to fix paths under
split-usr==true.
v8:
- use .split() also for src/coredump. Now everything is consistent ;)
- add rootlibdir option and use it on the libraries that require it
v9:
- indentation
v10:
- fix check for qrencode and libaudit
v11:
- unify handling of executable paths, provide options for all progs
This makes the meson build behave slightly differently than the
autoconf-based one, because we always first try to find the executable in the
filesystem, and fall back to the default. I think different handling of
loadkeys, setfont, and telinit was just a historical accident.
In addition to checking in $PATH, also check /usr/sbin/, /sbin for programs.
In Fedora $PATH includes /usr/sbin, (and /sbin is is a symlink to /usr/sbin),
but in Debian, those directories are not included in the path.
C.f. https://github.com/mesonbuild/meson/issues/1576.
- call all the options 'xxx-path' for clarity.
- sort man/rules/meson.build properly so it's stable
|
|
Fixup for 4b58153dd22172d817055d2a09a0cdf3f4bd9db3.
I saw this because of a clang warning. With gcc the -Wformat-nonliteral warning
doesn't seem to work as expected.
In two places, a string constructed with strjoina is used as the pattern. This
is safe, because we're taking a pattern which was already marked with _printf_
and prepending a known value to it. Those places are marked with #pragma to
silence the warning.
|
|
And then show it, to make things a bit friendlier to the user if we fail
acquiring some props.
In fact, this fixes a number of actual bugs, where we used an error
structure for output that we actually never got an error in.
|
|
This makes strjoin and strjoina more similar and avoids the useless final
argument.
spatch -I . -I ./src -I ./src/basic -I ./src/basic -I ./src/shared -I ./src/shared -I ./src/network -I ./src/locale -I ./src/login -I ./src/journal -I ./src/journal -I ./src/timedate -I ./src/timesync -I ./src/nspawn -I ./src/resolve -I ./src/resolve -I ./src/systemd -I ./src/core -I ./src/core -I ./src/libudev -I ./src/udev -I ./src/udev/net -I ./src/udev -I ./src/libsystemd/sd-bus -I ./src/libsystemd/sd-event -I ./src/libsystemd/sd-login -I ./src/libsystemd/sd-netlink -I ./src/libsystemd/sd-network -I ./src/libsystemd/sd-hwdb -I ./src/libsystemd/sd-device -I ./src/libsystemd/sd-id128 -I ./src/libsystemd-network --sp-file coccinelle/strjoin.cocci --in-place $(git ls-files src/*.c)
git grep -e '\bstrjoin\b.*NULL' -l|xargs sed -i -r 's/strjoin\((.*), NULL\)/strjoin(\1)/'
This might have missed a few cases (spatch has a really hard time dealing
with _cleanup_ macros), but that's no big issue, they can always be fixed
later.
|
|
sd_bus_error_set_errnof supports %m, so there's no need to call
strerror manually.
|
|
Fixes:
==27917== 3 bytes in 1 blocks are definitely lost in loss record 1 of 1
==27917== at 0x4C28BF6: malloc (vg_replace_malloc.c:299)
==27917== by 0x55083D9: strdup (in /usr/lib64/libc-2.22.so)
==27917== by 0x1140DA: find_converted_keymap (keymap-util.c:524)
==27917== by 0x110844: test_find_converted_keymap (test-keymap-util.c:52)
==27917== by 0x1124FE: main (test-keymap-util.c:213)
==27917==
|
|
the pager (#3550)
If "systemctl -H" is used, let's make sure we first terminate the bus
connection, and only then close the pager. If done in this order ssh will get
an EOF on stdin (as we speak D-Bus through ssh's stdin/stdout), and then
terminate. This makes sure the standard error we were invoked on is released by
ssh, and only that makes sure we don't deadlock on the pager which waits for
all clients closing its input pipe.
(Similar fixes for the various other xyzctl tools that support both pagers and
-H)
Fixes: #3543
|
|
This adds (undocumented) environment variables SYSTEMD_KBD_MODEL_MAP
and SYSTEMD_LANGUAGE_FALLBACK_MAP, which, if set, override compiled-in
locations of those two files.
Instead of skipping tests when the maps are not installed, just use
the one from the source dir. We still cannot do the mappings the other
way if /usr/lib/kbd/keymaps is not present, so truncate the tests in
that case.
Also tweak the debug messages a bit to make it easier to see
which function is failing.
|
|
As discovered by Adam Williamson in
https://bugzilla.redhat.com/show_bug.cgi?id=1333998#c32, after the changes in
81fd105a5f9 we would only match compound layouts, i.e. a comma would be
required after 'ru' to match. This seems wrong, and we should match single
layouts like too. So 'ru', 'ru,us' now both match.
startswith_comma is changed to not require a comma, i.e. check that the prefix
matches until a comma or the end of the string. Note that startswith_comma is
called twice. At the first site, we check that strings are not equal
beforehand, so this change to startswith_comma has no effect. At the second
site, it does have an effect, as described above.
|
|
Rework the code a bit where find_converted_keymap cannot (and should not) be
called with a null layout, so streq can be used instead of streq_ptr, etc.
Note that the behaviour of vconsole_convert_to_x11 and x11_convert_to_vconsole
is not symmetrical. When the latter cannot find a match, it simply makes the
vconsole mapping empty. But vconsole_convert_to_x11 leaves the x11 layout
unchanged. I don't know what the proper solution is here, so I'm just adding
more verbose logging without changing the logic.
|
|
I was puzzled why "localectl set-keymap pl" does not change the X11 keymap.
Output a message at notice level, becuase not converting the X11 keymap
is most likely an error. We usually do not output non-debug messages
from "library" code, but this isn't really library code, it's split out
to a separate file only to allow it to be called from tests.
(pl is not converted because we only have a mapping for pl2. This is
intentional, even though we might want to change this. In any case, the
conversion code works correctly.)
|
|
When converting an empty x11 variant, we would not delete vconsole mapping
properly.
find_legacy_keymap() is made non-static. I think it's important to be able to
test it. In principle we could also test it through the higher-level interface
of x11_convert_to_vconsole, but x11_convert_to_vconsole also uses
find_converted_keymap, and it's better to test at this lower level.
Note that find_legacy_keymap might be a bit of a misnomer, because we'd probably
want to keep kbd-model-map even if the "legacy" layouts went away. So we might
want to change this name, but I'm leaving that for another commit.
|
|
This way the dbus and management logic is seperated from the business logic
and we can write test cases for the mapping functionality.
|
|
|
|
and make use of it everywhere
|
|
|
|
Previously, libxkbcommon was a compile-time option. When enabled the localed
binary would strictly depend on it, thus pulling in libxkbcommon and its
dependencies, which are non-trivial in size.
With this change we dlopen() libxkbcommon when it is available instead. If the
library is available behaviour is as before. However, if it isn't the system is
considered "headless", i.e. without local hardware and all attempts to set the
local keyboard configuration will be refused.
This is useful for general-purpose distributions which want to support
"headless" (such as container systems) and "full" systems with the same build.
|
|
If kernel command line options for locale are given,
the output of 'localectl status' command is not aligned,
for example,
=============
Warning: Settings on kernel command line override system locale settings in /etc/locale.conf.
Command Line: LANG=C
System Locale: LANG=C
VC Keymap: n/a
X11 Layout: n/a
=============
This commit fixes the alignment.
|
|
If /etc/locale.conf is empty or does not exist, the output of
'localectl status' command includes an unnecessary line break
as follows:
=======================
System Locale: n/a
VC Keymap: n/a
X11 Layout: n/a
=======================
This commit removes the line break after the system locale.
|
|
https://github.com/systemd/systemd/pull/2508#issuecomment-190901170
Maybe fixes https://bugzilla.redhat.com/show_bug.cgi?id=1308771.
|
|
tree-wide: merge pager_open_if_enabled() to the pager_open()
|
|
Many subsystems define own pager_open_if_enabled() function which
checks '--no-pager' command line argument and open pager depends
on its value. All implementations of pager_open_if_enabled() are
the same. Let's merger this function with pager_open() from the
shared/pager.c and remove pager_open_if_enabled() from all subsytems
to prevent code duplication.
|
|
Throughout the tree there's spurious use of spaces separating ++ and --
operators from their respective operands. Make ++ and -- operator
consistent with the majority of existing uses; discard the spaces.
|
|
This should be handled fine now by .dir-locals.el, so need to carry that
stuff in every file.
|
|
gcc is confused by the common idiom of
return errno ? -errno : -ESOMETHING
and thinks a positive value may be returned. Replace this condition
with errno > 0 to help gcc and avoid many spurious warnings. I filed
a gcc rfe a long time ago, but it hard to say if it will ever be
implemented [1].
Both conventions were used in the codebase, this change makes things
more consistent. This is a follow up to bcb161b0230f.
[1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=61846
|
|
GLIB has recently started to officially support the gcc cleanup
attribute in its public API, hence let's do the same for our APIs.
With this patch we'll define an xyz_unrefp() call for each public
xyz_unref() call, to make it easy to use inside a
__attribute__((cleanup())) expression. Then, all code is ported over to
make use of this.
The new calls are also documented in the man pages, with examples how to
use them (well, I only added docs where the _unref() call itself already
had docs, and the examples, only cover sd_bus_unrefp() and
sd_event_unrefp()).
This also renames sd_lldp_free() to sd_lldp_unref(), since that's how we
tend to call our destructors these days.
Note that this defines no public macro that wraps gcc's attribute and
makes it easier to use. While I think it's our duty in the library to
make our stuff easy to use, I figure it's not our duty to make gcc's own
features easy to use on its own. Most likely, client code which wants to
make use of this should define its own:
#define _cleanup_(function) __attribute__((cleanup(function)))
Or similar, to make the gcc feature easier to use.
Making this logic public has the benefit that we can remove three header
files whose only purpose was to define these functions internally.
See #2008.
|
|
|
|
|
|
|
|
There are more than enough to deserve their own .c file, hence move them
over.
|
|
In sd-bus, the sd_bus_open_xyz() family of calls allocates a new bus,
while sd_bus_default_xyz() family tries to reuse the thread's default
bus. bus_open_transport() sometimes internally uses the former,
sometimes the latter family, but suggests it only calls the former via
its name. Hence, let's avoid this confusion, and generically rename the
call to bus_connect_transport().
Similar for all related calls.
And while we are at it, also change cgls + cgtop to do direct systemd
connections where possible, since all they do is talk to systemd itself.
|
|
This also allows us to drop build.h from a ton of files, hence do so.
Since we touched the #includes of those files, let's order them properly
according to CODING_STYLE.
|
|
That function really makes little sense, as the open-coded variant
is much more readable. Also, if the 2nd argument is NULL, mfree()
is a much better candidate.
Convert the only users of this function in localed, and then remove it
entirely.
|
|
Introduce a proper enum, and don't pass around string ids anymore. This
simplifies things quite a bit, and makes virtualization detection more
similar to architecture detection.
|
|
Extra details for an action can be supplied when calling polkit's
CheckAuthorization method. Details are a list of key/value string pairs.
Custom policy can use these details when making authorization decisions.
|
|
|
|
strv_split_extract is to strv_split_quotes as extract_first_word was to
unquote_first_word.
Now there's extract_first_word for extracting a single argument,
extract_many_words for extracting a bounded number of arguments,
and strv_split_extract for extracting an arbitrary number of arguments.
|
|
Manual merge of https://github.com/systemd/systemd/pull/751.
|
|
Tests are modified to check behaviour with relax and without relax.
New tests are added for hostname_cleanup().
Tests are moved a new file (test-hostname-util) because there's
now a bunch of them.
New parameter is not used anywhere, except in tests, so there should
be no observable change.
|
|
|
|
Some places invoked fflush() directly with their own manual error
checking, let's unify all that by using fflush_and_check().
This also unifies the general error paths of fflush()+rename() file
writers.
|
|
sd_bus_flush_close_unref() is a call that simply combines sd_bus_flush()
(which writes all unwritten messages out) + sd_bus_close() (which
terminates the connection, releasing all unread messages) +
sd_bus_unref() (which frees the connection).
The combination of this call is used pretty frequently in systemd tools
right before exiting, and should also be relevant for most external
clients, and is hence useful to cover in a call of its own.
Previously the combination of the three calls was already done in the
_cleanup_bus_close_unref_ macro, but this was only available internally.
Also see #327
|
|
If you use bus_map_all_properties(), you must be aware that it might
touch output variables even though it may fail. This is, because we parse
many different bus-properties and cannot tell how to clean them up, in
case we fail deep down in the parser.
Fix all callers of bus_map_all_properties() to correctly cleanup any
context structures at all times.
|
|
|
|
This should simplify the prototype a bit. The bus parameter is redundant
in most cases, and in the few where it matters it can be derived from
the message via sd_bus_message_get_bus().
|
