| Age | Commit message (Collapse) | Author |
|---|
|
If kernel command line options for locale are given,
the output of 'localectl status' command is not aligned,
for example,
=============
Warning: Settings on kernel command line override system locale settings in /etc/locale.conf.
Command Line: LANG=C
System Locale: LANG=C
VC Keymap: n/a
X11 Layout: n/a
=============
This commit fixes the alignment.
|
|
If /etc/locale.conf is empty or does not exist, the output of
'localectl status' command includes an unnecessary line break
as follows:
=======================
System Locale: n/a
VC Keymap: n/a
X11 Layout: n/a
=======================
This commit removes the line break after the system locale.
|
|
https://github.com/systemd/systemd/pull/2508#issuecomment-190901170
Maybe fixes https://bugzilla.redhat.com/show_bug.cgi?id=1308771.
|
|
tree-wide: merge pager_open_if_enabled() to the pager_open()
|
|
Many subsystems define own pager_open_if_enabled() function which
checks '--no-pager' command line argument and open pager depends
on its value. All implementations of pager_open_if_enabled() are
the same. Let's merger this function with pager_open() from the
shared/pager.c and remove pager_open_if_enabled() from all subsytems
to prevent code duplication.
|
|
Throughout the tree there's spurious use of spaces separating ++ and --
operators from their respective operands. Make ++ and -- operator
consistent with the majority of existing uses; discard the spaces.
|
|
This should be handled fine now by .dir-locals.el, so need to carry that
stuff in every file.
|
|
gcc is confused by the common idiom of
return errno ? -errno : -ESOMETHING
and thinks a positive value may be returned. Replace this condition
with errno > 0 to help gcc and avoid many spurious warnings. I filed
a gcc rfe a long time ago, but it hard to say if it will ever be
implemented [1].
Both conventions were used in the codebase, this change makes things
more consistent. This is a follow up to bcb161b0230f.
[1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=61846
|
|
GLIB has recently started to officially support the gcc cleanup
attribute in its public API, hence let's do the same for our APIs.
With this patch we'll define an xyz_unrefp() call for each public
xyz_unref() call, to make it easy to use inside a
__attribute__((cleanup())) expression. Then, all code is ported over to
make use of this.
The new calls are also documented in the man pages, with examples how to
use them (well, I only added docs where the _unref() call itself already
had docs, and the examples, only cover sd_bus_unrefp() and
sd_event_unrefp()).
This also renames sd_lldp_free() to sd_lldp_unref(), since that's how we
tend to call our destructors these days.
Note that this defines no public macro that wraps gcc's attribute and
makes it easier to use. While I think it's our duty in the library to
make our stuff easy to use, I figure it's not our duty to make gcc's own
features easy to use on its own. Most likely, client code which wants to
make use of this should define its own:
#define _cleanup_(function) __attribute__((cleanup(function)))
Or similar, to make the gcc feature easier to use.
Making this logic public has the benefit that we can remove three header
files whose only purpose was to define these functions internally.
See #2008.
|
|
|
|
|
|
|
|
There are more than enough to deserve their own .c file, hence move them
over.
|
|
In sd-bus, the sd_bus_open_xyz() family of calls allocates a new bus,
while sd_bus_default_xyz() family tries to reuse the thread's default
bus. bus_open_transport() sometimes internally uses the former,
sometimes the latter family, but suggests it only calls the former via
its name. Hence, let's avoid this confusion, and generically rename the
call to bus_connect_transport().
Similar for all related calls.
And while we are at it, also change cgls + cgtop to do direct systemd
connections where possible, since all they do is talk to systemd itself.
|
|
This also allows us to drop build.h from a ton of files, hence do so.
Since we touched the #includes of those files, let's order them properly
according to CODING_STYLE.
|
|
That function really makes little sense, as the open-coded variant
is much more readable. Also, if the 2nd argument is NULL, mfree()
is a much better candidate.
Convert the only users of this function in localed, and then remove it
entirely.
|
|
Introduce a proper enum, and don't pass around string ids anymore. This
simplifies things quite a bit, and makes virtualization detection more
similar to architecture detection.
|
|
Extra details for an action can be supplied when calling polkit's
CheckAuthorization method. Details are a list of key/value string pairs.
Custom policy can use these details when making authorization decisions.
|
|
|
|
strv_split_extract is to strv_split_quotes as extract_first_word was to
unquote_first_word.
Now there's extract_first_word for extracting a single argument,
extract_many_words for extracting a bounded number of arguments,
and strv_split_extract for extracting an arbitrary number of arguments.
|
|
Manual merge of https://github.com/systemd/systemd/pull/751.
|
|
Tests are modified to check behaviour with relax and without relax.
New tests are added for hostname_cleanup().
Tests are moved a new file (test-hostname-util) because there's
now a bunch of them.
New parameter is not used anywhere, except in tests, so there should
be no observable change.
|
|
|
|
Some places invoked fflush() directly with their own manual error
checking, let's unify all that by using fflush_and_check().
This also unifies the general error paths of fflush()+rename() file
writers.
|
|
sd_bus_flush_close_unref() is a call that simply combines sd_bus_flush()
(which writes all unwritten messages out) + sd_bus_close() (which
terminates the connection, releasing all unread messages) +
sd_bus_unref() (which frees the connection).
The combination of this call is used pretty frequently in systemd tools
right before exiting, and should also be relevant for most external
clients, and is hence useful to cover in a call of its own.
Previously the combination of the three calls was already done in the
_cleanup_bus_close_unref_ macro, but this was only available internally.
Also see #327
|
|
If you use bus_map_all_properties(), you must be aware that it might
touch output variables even though it may fail. This is, because we parse
many different bus-properties and cannot tell how to clean them up, in
case we fail deep down in the parser.
Fix all callers of bus_map_all_properties() to correctly cleanup any
context structures at all times.
|
|
|
|
This should simplify the prototype a bit. The bus parameter is redundant
in most cases, and in the few where it matters it can be derived from
the message via sd_bus_message_get_bus().
|
|
When parsing words from input files, optionally automatically unescape
the passed strings, controllable via a new flags parameter.
Make use of this in tmpfiles, and port everything else over, too.
This improves parsing quite a bit, since we no longer have to process the
same string multiple times with different calls, where an earlier call
might corrupt the input for a later call.
|
|
This patch removes includes that are not used. The removals were found with
include-what-you-use which checks if any of the symbols from a header is
in use.
|
|
Also, allow clients to alter their own objects without any further
priviliges. i.e. this allows clients to kill and lock their own sessions
without involving PK.
|
|
|
|
Silesian and Kashubian speakers would prefer to fall back to Polish (pl)
translations instead of English (C).
https://bugs.freedesktop.org/show_bug.cgi?id=89021
|
|
For the entries listed in the first column of language-fallback-map,
the entry from the second column will be used for LANGUAGE=, if
LANGUAGE= is not explicitly specified.
https://bugzilla.redhat.com/show_bug.cgi?id=624158
|
|
This map will be used to provide a fallback for translations.
For example, a Niederdeutsch (nds) speaker prefers to fall back to
German (de) translations rather then the English (C) ones.
https://bugzilla.redhat.com/show_bug.cgi?id=624158#c9
|
|
After all it is now much more like strjoin() than strappend(). At the
same time, add support for NULL sentinels, even if they are normally not
necessary.
|
|
https://bugs.freedesktop.org/show_bug.cgi?id=88545
|
|
|
|
It does not use any functions from libcap directly. The CAP_SYS_ADMIN constant
in use by this file comes from <linux/capability.h> imported through "missing.h".
Tested that "systemd-localed" builds cleanly and works after this change.
|
|
Pretty much everywhere else we use the generic term "machine" when
referring to containers in API, so let's do though in sd-bus too. In
particular, since the concept of a "container" exists in sd-bus too, but
as part of the marshalling system.
|
|
resulting name is actually valid
Also, rename filename_is_safe() to filename_is_valid(), since it
actually does a full validation for what the kernel will accept as file
name, it's not just a heuristic.
|
|
https://bugs.freedesktop.org/show_bug.cgi?id=85411
|
|
The errors are prefixed with "libxkbcommon" to provide some context,
because they are quite confusing without it. With the prefix, we at
least know where they come from.
|
|
Using the same scripts as in f647962d64e "treewide: yet more log_*_errno
+ return simplifications".
|
|
If the format string contains %m, clearly errno must have a meaningful
value, so we might as well use log_*_errno to have ERRNO= logged.
Using:
find . -name '*.[ch]' | xargs sed -r -i -e \
's/log_(debug|info|notice|warning|error|emergency)\((".*%m.*")/log_\1_errno(errno, \2/'
Plus some whitespace, linewrap, and indent adjustments.
|
|
Using:
find . -name '*.[ch]' | while read f; do perl -i.mmm -e \
'local $/;
local $_=<>;
s/(if\s*\([^\n]+\))\s*{\n(\s*)(log_[a-z_]*_errno\(\s*([->a-zA-Z_]+)\s*,[^;]+);\s*return\s+\g4;\s+}/\1\n\2return \3;/msg;
print;'
$f
done
And a couple of manual whitespace fixups.
|
|
Basically:
find . -name '*.[ch]' | while read f; do perl -i.mmm -e \
'local $/;
local $_=<>;
s/log_(debug|info|notice|warning|error|emergency)\("([^"]*)%s"([^;]*),\s*strerror\(-?([->a-zA-Z_]+)\)\);/log_\1_errno(\4, "\2%m"\3);/gms;print;' \
$f; done
Plus manual indentation fixups.
|
|
|
|
It corrrectly handles both positive and negative errno values.
|
|
As a followup to 086891e5c1 "log: add an "error" parameter to all
low-level logging calls and intrdouce log_error_errno() as log calls
that take error numbers", use sed to convert the simple cases to use
the new macros:
find . -name '*.[ch]' | xargs sed -r -i -e \
's/log_(debug|info|notice|warning|error|emergency)\("(.*)%s"(.*), strerror\(-([a-zA-Z_]+)\)\);/log_\1_errno(-\4, "\2%m"\3);/'
Multi-line log_*() invocations are not covered.
And we also should add log_unit_*_errno().
|
