| Age | Commit message (Collapse) | Author |
|---|
|
sleep immediately again
This is quite useful on laptops such as the Lenovo Yoga, where the power
button is placed on the front side of the laptop and can be pressed by
accident even if the lid is closed.
This reworks a bit of the logind logic to repeatedly try to suspend the
system as long as a lid is closed. We use the new "post" event source
for this, so that we don't keep things busy.
This also adds some code to check the lid status on boot, so that a
powered-off machine that is accidentaly powered on goes into suspend
immediately.
Yay! From now on I can put my Yoga safely in my backpack without fearing
that it might turn itself on and drain the battery.
|
|
first (or second)
Previously the returned object of constructor functions where sometimes
returned as last, sometimes as first and sometimes as second parameter.
Let's clean this up a bit. Here are the new rules:
1. The object the new object is derived from is put first, if there is any
2. The object we are creating will be returned in the next arguments
3. This is followed by any additional arguments
Rationale:
For functions that operate on an object we always put that object first.
Constructors should probably not be too different in this regard. Also,
if the additional parameters might want to use varargs which suggests to
put them last.
Note that this new scheme only applies to constructor functions, not to
all other functions. We do give a lot of freedom for those.
Note that this commit only changes the order of the new functions we
added, for old ones we accept the wrong order and leave it like that.
|
|
|
|
Currently if the user logs out, the GC may never call user_stop(),
this will not terminate the systemd user and (sd-pam) of that user.
To fix this, remove the USER_CLOSING state check that is blocking the
GC from calling user_stop(). Since if user_check_gc() returns false
this means that all the sessions of the user were removed which will
make user_get_state() return USER_CLOSING.
Conclusion: that test will never be statisfied.
So we remove the USER_CLOSING check and replace it with a check inside
user_stop() this way we know that user_stop() has already queued stop
jobs, no need to redo.
This ensures that the GC will get its two steps correctly as pointed out
by Lennart:
http://lists.freedesktop.org/archives/systemd-devel/2014-February/016825.html
Note: this also fixes another bug that prevents creating the user
private dbus socket which will break communications with the user
manager.
|
|
KillUserProcesses=yes/no should be ignored when termination is
explicitly requested.
|
|
Simplify the shutdown logic a bit:
- Keep the session FIFO around in the PAM module, even after the session
shutdown hook has been finished. This allows logind to track precisely
when the PAM handler goes away.
- In the ReleaseSession() call start a timer, that will stop terminate
the session when elapsed.
- Never fiddle with the KillMode of scopes to configure whether user
processes should be killed or not. Instead, simply leave the scope
units around when we terminate a session whose processes should not be
killed.
- When killing is enabled, stop the session scope on FIFO EOF or after
the ReleaseSession() timeout. When killing is disabled, simply tell
PID 1 to abandon the scope.
Because the scopes stay around and hence all processes are always member
of a scope, the system shutdown logic should be more robust, as the
scopes can be shutdown as part of the usual shutdown logic.
|
|
matches
Instead of checking each device after we got it, check wuth an
enumeration filter instead, to make it more efficient.
|
|
udev initialization
Managers shouldn't pick up the devices the manage before udev finished
initialization, hence check explicitly for that.
|
|
We really should return errors from event handlers if we have a
continous problem and don't know any other solution.
|
|
|
|
flags conversion
|
|
that are closer to kdbus
This turns around DO_NOT_QUEUE into QUEUE which implies a more useful
default. (And negative options are awful anyway.)
|
|
Adds a new call sd_event_set_watchdog() that can be used to hook up the
event loop with the watchdog supervision logic of systemd. If enabled
and $WATCHDOG_USEC is set the event loop will ping the invoking systemd
daemon right after coming back from epoll_wait() but not more often than
$WATCHDOG_USEC/4. The epoll_wait() will sleep no longer than
$WATCHDOG_USEC/4*3, to make sure the service manager is called in time.
This means that setting WatchdogSec= in a .service file and calling
sd_event_set_watchdog() in your daemon is enough to hook it up with the
watchdog logic.
|
|
other calls
Instead of returning an enum of return codes, make them return error
codes like kdbus does internally.
Also, document this behaviour so that clients can stick to it.
(Also rework bus-control.c to always have to functions for dbus1 vs.
kernel implementation of the various calls.)
|
|
This patch converts PID 1 to libsystemd-bus and thus drops the
dependency on libdbus. The only remaining code using libdbus is a test
case that validates our bus marshalling against libdbus' marshalling,
and this dependency can be turned off.
This patch also adds a couple of things to libsystem-bus, that are
necessary to make the port work:
- Synthesizing of "Disconnected" messages when bus connections are
severed.
- Support for attaching multiple vtables for the same interface on the
same path.
This patch also fixes the SetDefaultTarget() and GetDefaultTarget() bus
calls which used an inappropriate signature.
As a side effect we will now generate PropertiesChanged messages which
carry property contents, rather than just invalidation information.
|
|
everywhere
We want to emphasize bus connections as per-thread communication
primitives, hence introduce a concept of a per-thread default bus, and
make use of it everywhere.
|
|
it everywhere
Try to emphasize a bit that there should be a mapping between event
loops and threads, hence introduce a logic that there's one "default"
event loop for each thread, that can be queried via
"sd_event_default()".
|
|
"make check-api-unused" informs us about code that is not used anymore
or that is exported but only used internally. Fix these all over the
place.
|
|
|
|
each invocation
We can determine the list entry type via the typeof() gcc construct, and
so we should to make the macros much shorter to use.
|
|
liblogind-core.la was underlinked, missing a few functions
defined in logind.c. They are moved to a new file, logind-core.c,
and this file is linked into liblogind-core.la.
In addition, logind-acl.c is attached to the liblogind-core.la,
instead of systemd-logind directly.
|
|
dbus-send --print-reply --system --dest=org.freedesktop.login1
/org/freedesktop/login1 org.freedesktop.login1.Manager.GetUserByPID
uint32:0
causes
systemd-logind[29843]: Assertion 'pid >= 1' failed at
src/login/logind.c:938, function manager_get_user_by_pid(). Aborting.
|
|
The seat->vtconsole member always points to the default seat seat0. Even
if VTs are disabled, it's used as default seat. Therefore, rename it to
seat0 to correctly state what it is.
This also changes the seat files in /run from IS_VTCONSOLE to IS_SEAT0. It
wasn't used by any code, yet, so this seems fine.
While we are at it, we also remove every "if (s->vtconsole)" as this
pointer is always valid!
|
|
A session usually has only a single compositor or other application that
controls graphics and input devices on it. To avoid multiple applications
from hijacking each other's devices or even using the devices in parallel,
we add session controllers.
A session controller is an application that manages a session. Specific
API calls may be limited to controllers to avoid others from getting
unprivileged access to restricted resources. A session becomes a
controller by calling the RequestControl() dbus API call. It can drop it
via ReleaseControl().
logind tracks bus-names to release the controller once an application
closes the bus. We use the new bus-name tracking to do that. Note that
during ReleaseControl() we need to check whether some other session also
tracks the name before we remove it from the bus-name tracking list.
Currently, we only allow one controller at a time. However, the public API
does not enforce this restriction. So if it makes sense, we can allow
multiple controllers in parallel later. Or we can add a "scope" parameter,
which allows a different controller for graphics-devices, sound-devices
and whatever you want.
Note that currently you get -EBUSY if there is already a controller. You
can force the RequestControl() call (root-only) to drop the current
controller and recover the session during an emergency. To recover a seat,
this is not needed, though. You can simply create a new session or
force-activate it.
To become a session controller, a dbus caller must either be root or the
same user as the user of the session. This allows us to run a session
compositor as user and we no longer need any CAP_SYS_ADMIN.
|
|
If we want to track bus-names to allow exclusive resource-access, we need
a way to get notified when a bus-name is gone. We make logind watch for
NameOwnerChanged dbus events and check whether the name is currently
watched. If it is, we remove it from the watch-list (notification for
other objects can be added in follow-up patches).
|
|
Session compositors need access to fbdev, DRM and evdev devices if they
control a session. To make logind pass them to sessions, we need to
listen for them actively.
However, we avoid creating new seats for non master-of-seat devices. Only
once a seat is created, we start remembering all other session devices. If
the last master-device is removed (even if there are other non-master
devices still available), we destroy the seat. This is the current
behavior, but we need to explicitly implement it now as there may be
non-master devices in the seat->devices list.
Unlike master devices, we don't care whether our list of non-master
devices is complete. We don't export this list but use it only as cache if
sessions request these devices. Hence, if a session requests a device that
is not in the list, we will simply look it up. However, once a session
requested a device, we must be notified of "remove" udev events. So we
must link the devices somehow into the device-list.
Regarding the implementation, we now sort the device list by the "master"
flag. This guarantees that master devices are at the front and non-master
devices at the tail of the list. Thus, we can easily test whether a seat
has a master device attached.
|
|
Only ASCII letters and digits are allowed.
|
|
|
|
|
|
When PID 1 reloads the units logind/machined will see UnitRemoved
signals for all units. Instead of trusting these immediately, let's
check the actual unit state before considering a unit gone, so that
reloading PID 1 is not mistaken as the end of all sessions.
|
|
|
|
Embedded folks don't need the machine registration stuff, hence it's
nice to make this optional. Also, I'd expect that machinectl will grow
additional commands quickly, for example to join existing containers and
suchlike, hence it's better keeping that separate from loginctl.
|
|
In order to prepare things for the single-writer cgroup scheme, let's
make logind use systemd's own primitives for cgroup management.
Every login user now gets his own private slice unit, in which his sessions
live in a scope unit each. Also, add user@$UID.service to the same
slice, and implicitly start it on first login.
|
|
|
|
- This changes all logind cgroup objects to use slice objects rather
than fixed croup locations.
- logind can now collect minimal information about running
VMs/containers. As fixed cgroup locations can no longer be used we
need an entity that keeps track of machine cgroups in whatever slice
they might be located. Since logind already keeps track of users,
sessions and seats this is a trivial addition.
- nspawn will now register with logind and pass various bits of metadata
along. A new option "--slice=" has been added to place the container
in a specific slice.
- loginctl gained commands to list, introspect and terminate machines.
- user.slice and machine.slice will now be pulled in by logind.service,
since only logind.service requires this slice.
|
|
Disallow recursive .include, and make it unavailable in anything but
unit files.
|
|
|
|
|
|
The information about the unit for which files are being parsed
is passed all the way down. This way messages land in the journal
with proper UNIT=... or USER_UNIT=... attribution.
'systemctl status' and 'journalctl -u' not displaying those messages
has been a source of confusion for users, since the journal entry for
a misspelt setting was often logged quite a bit earlier than the
failure to start a unit.
Based-on-a-patch-by: Oleksii Shevchuk <alxchk@gmail.com>
|
|
containers there
Containers will now carry a label (normally derived from the root
directory name, but configurable by the user), and the container's root
cgroup is /machine/<label>. This label is called "machine name", and can
cover both containers and VMs (as soon as libvirt also makes use of
/machine/).
libsystemd-login can be used to query the machine name from a process.
This patch also includes numerous clean-ups for the cgroup code.
|
|
|
|
|
|
Before, we would initialize many fields twice: first
by filling the structure with zeros, and then a second
time with the real values. We can let the compiler do
the job for us, avoiding one copy.
A downside of this patch is that text gets slightly
bigger. This is because all zero() calls are effectively
inlined:
$ size build/.libs/systemd
text data bss dec hex filename
before 897737 107300 2560 1007597 f5fed build/.libs/systemd
after 897873 107300 2560 1007733 f6075 build/.libs/systemd
… actually less than 1‰.
A few asserts that the parameter is not null had to be removed. I
don't think this changes much, because first, it is quite unlikely
for the assert to fail, and second, an immediate SEGV is almost as
good as an assert.
|
|
Strictly speaking this isn't necessary for the /run/systemd/seats/
directory, since that is created anyway as the first seat is found, and
seat0 is always found. But let's be explicit here, and also create the
sessions/ and users/ directories, so that people can always install
inotify watches from very early on, even when nobody logged in yet.
|
|
|
|
We currently enforce that seats are to be named in the form of
"seatXXX", i.e. need to begin with the 4 characters "seat". Thus,
"seat-master" would qualify as a seat name. As seat names are frequently
used as tags on devices, the "seat-master" tag might hence confuse
logind if the user decides to name a seat "seat-master".
Hence, avoid any ambuigity: let's rename the "seat-master" tag to
"master-of-seat".
|
|
- Don't allow any locks to be taken while we are in the process of
executing the specific operation, so that apps are not surprised if a
suspend/shutdown happens while they rely on their inhibitor.
- Get rid of the Resumed signal, it was a bad idea, and redundant due to
PrepareForSleep(false), see below.
- Always send out PrepareFor{Shutdown,Sleep} signals, instead of only if
a delay lock is taken.
- Move PrepareForSleep(false) after we come back from the suspend, so
that apps can use this as "Resumed" notification. This also has the
benefit that apps know when to take a new lock.
|
|
This should make sure that closing the lid while shutting down won't
suspend the machine but will simply cause the shutdown to complete.
|
|
file logind.c: The seat is now activated by any device with udev tag "seat-master"
file 71-seat.rules.in: All framebuffer devices have this tag
|
|
|
