| Age | Commit message (Collapse) | Author |
|---|
|
Also, move a couple of more path-related functions to path-util.c.
|
|
There are more than enough to deserve their own .c file, hence move them
over.
|
|
string-util.[ch]
There are more than enough calls doing string manipulations to deserve
its own files, hence do something about it.
This patch also sorts the #include blocks of all files that needed to be
updated, according to the sorting suggestions from CODING_STYLE. Since
pretty much every file needs our string manipulation functions this
effectively means that most files have sorted #include blocks now.
Also touches a few unrelated include files.
|
|
The following functions return immediately if a null pointer was passed.
* calendar_spec_free
* link_address_free
* manager_free
* sd_bus_unref
* sd_journal_close
* udev_monitor_unref
* udev_unref
It is therefore not needed that a function caller repeats a corresponding check.
This issue was fixed by using the software Coccinelle 1.0.1.
|
|
Use mfree() where we can.
Drop unnecessary {}.
Drop unnecessary variable declarations.
Cast syscall invocations where explicitly don't care for the return
value to (void).
Reword a comment.
|
|
Let logind use the sd_bus_track helper object to track the controllers of
sessions. This does not only remove quite some code but also kills the
unconditional matches for all NameOwnerChanged signals.
The latter is something we should never ever do, as it wakes up the daemon
every time a client connects, which doesn't scale.
|
|
Commit c0f32805 ("logind: use sd_event timer source for inhibitor
logic") reworked the main loop logic of logind so that it uses a
real timeout callback handler to execute delayed functions.
What the old code did, however, was to call those functions on
every iteration in the main loop, not only when the timeout
expired.
Restore that behavior by bringing back manager_dispatch_delayed(),
and call it from manager_run(). The internal event source callback
manager_inhibit_timeout_handler() was turned into a wrapper of
manager_dispatch_delayed() now.
|
|
This ports a lot of manual code over to sigprocmask_many() and friends.
Also, we now consistly check for sigprocmask() failures with
assert_se(), since the call cannot realistically fail unless there's a
programming error.
Also encloses a few sd_event_add_signal() calls with (void) when we
ignore the return values for it knowingly.
|
|
No functional changes.
|
|
Make Coverity happy and tell it we're not interested in the return
value of these two calls.
|
|
Port over more code from shutdownd and teach logind to write /run/nologin at
least 5 minutes before the system is going down, and
/run/systemd/shutdown/scheduled when a shutdown is scheduled.
|
|
Add a timer to print UTMP wall messages so that it repeatedly informs users
about a scheduled shutdown:
* every 1 minute with less than 10 minutes to go
* every 15 minutes with less than 60 minutes to go
* every 30 minutes with less than 180 minutes (3 hours) to go
* every 60 minutes if more than that to go
This functionality only active if the .EnableWallMessages DBus property
is set to true. Also, a custom string can be added to the wall message,
set through the WallMessagePrefix property.
|
|
Add a method called ScheduleShutdown in org.freedesktop.login1.Manager
which adds a timer to shut down the system at a later point in time.
The first argument holds the type of the schedule that is about to
happen, and must be one of 'reboot', 'halt' or 'poweroff'.
The second argument specifies the absolute time, based on
CLOCK_REALTIME in nanoseconds, at which the the operation should be
executed.
To cancel a previously scheduled shutdown, the CancelScheduledShutdown()
can be called, which returns a bool, indicating whether a scheduled
timeout was cancelled.
Also add a new property called ScheduledShutdown which returns the
equivalent to what was passed in via ScheduleShutdown, as '(st)' type.
|
|
make manager_gc(), manager_startup(), manager_new(), manager_free()
and manager_run() static, and kill their forward declarations.
|
|
Instead of open-coding the delayed action and inhibit timeout logic,
switch over to a real sd_event_source based implementation.
This is not only easier to read but also allows us to add more timers
in the future.
|
|
|
|
This introduces 'HoldoffTimeoutSec' to logind.conf to make
IGNORE_LID_SWITCH_{SUSPEND,STARTUP}_USEC configurable.
Background: If an external monitor is connected, or if the system is
docked, we want to ignore LID events. This is required to support setups
where a laptop is used with external peripherals while the LID is closed.
However, this requires us to probe all hot-plugged devices before reacting
to LID events. But with modern buses like USB, the standards do not impose
any timeout on the slots, so we have no chance to know whether a given
slot is used or not. Hence, after resume and startup, we have to wait a
fixed timeout to give the kernel a chance to probe devices. Our timeout
has always been generous enough to support even the slowest devices.
However, a lot of people didn't use these features and wanted to disable
the hold-off timer. Now we provide a knob to do that.
|
|
This patch removes includes that are not used. The removals were found with
include-what-you-use which checks if any of the symbols from a header is
in use.
|
|
If the format string contains %m, clearly errno must have a meaningful
value, so we might as well use log_*_errno to have ERRNO= logged.
Using:
find . -name '*.[ch]' | xargs sed -r -i -e \
's/log_(debug|info|notice|warning|error|emergency)\((".*%m.*")/log_\1_errno(errno, \2/'
Plus some whitespace, linewrap, and indent adjustments.
|
|
Using:
find . -name '*.[ch]' | while read f; do perl -i.mmm -e \
'local $/;
local $_=<>;
s/(if\s*\([^\n]+\))\s*{\n(\s*)(log_[a-z_]*_errno\(\s*([->a-zA-Z_]+)\s*,[^;]+);\s*return\s+\g4;\s+}/\1\n\2return \3;/msg;
print;'
$f
done
And a couple of manual whitespace fixups.
|
|
It corrrectly handles both positive and negative errno values.
|
|
As a followup to 086891e5c1 "log: add an "error" parameter to all
low-level logging calls and intrdouce log_error_errno() as log calls
that take error numbers", use sed to convert the simple cases to use
the new macros:
find . -name '*.[ch]' | xargs sed -r -i -e \
's/log_(debug|info|notice|warning|error|emergency)\("(.*)%s"(.*), strerror\(-([a-zA-Z_]+)\)\);/log_\1_errno(-\4, "\2%m"\3);/'
Multi-line log_*() invocations are not covered.
And we also should add log_unit_*_errno().
|
|
This makes it possible to drop in logind configuration snippets from a
package or other configuration management mechanism.
Add documentation to the header of /etc/logind.conf pointing the user at
/etc/logind.conf.d/*.conf.
Introduce a new helper, conf_parse_many, to parse configuration files in
a search path.
|
|
If a session controller does not need synchronous VT switches, we allow
them to pass VT control to logind, which acknowledges all VT switches
unconditionally. This works fine with all sessions using the dbus API,
but causes out-of-sync device use if we switch to legacy sessions that
are notified via VT signals. Those are processed before logind notices
the session-switch via sysfs. Therefore, leaving the old session still
active for a short amount of time.
This, in fact, may cause the legacy session to prepare graphics devices
before the old session was deactivated, and thus, maybe causing the old
session to interfer with graphics device usage.
Fix this by releasing devices immediately before acknowledging VT
switches. This way, sessions without VT handlers are required to support
async session switching (which they do in that case, anyway).
|
|
It is redundant to store 'hash' and 'compare' function pointers in
struct Hashmap separately. The functions always comprise a pair.
Store a single pointer to struct hash_ops instead.
systemd keeps hundreds of hashmaps, so this saves a little bit of
memory.
|
|
https://bugs.freedesktop.org/show_bug.cgi?id=82485
|
|
|
|
It's unneccessary, not used, and complicates callers of the
function.
|
|
sd-event does not allow multiple handlers for a single signal. However,
logind sets up signal handlers for each session with VT_PROCESS set (that
is, it has an active controller). Therefore, registering multiple such
controllers will fail.
Lets make the VT-handler global, as it's mostly trivial, anyway. This way,
the sessions don't have to take care of that and we can simply acknowledge
all VT-switch requests as we always did.
|
|
Special care is needed so that we get an error message if the
file failed to parse, but not when it is missing. To avoid duplicating
the same error check in every caller, add an additional 'warn' boolean
to tell config_parse whether a message should be issued.
This makes things both shorter and more robust wrt. to error reporting.
|
|
|
|
No functional change expected :)
|
|
attached to a bus connection
This makes callback behaviour more like sd-event or sd-resolve, and
creates proper object for unregistering callbacks.
Taking the refernce to the slot is optional. If not taken life time of
the slot will be bound to the underlying bus object (or in the case of
an async call until the reply has been recieved).
|
|
CLOCK_BOOTTIME_ALARM, too
|
|
safe_close() automatically becomes a NOP when a negative fd is passed,
and returns -1 unconditionally. This makes it easy to write lines like
this:
fd = safe_close(fd);
Which will close an fd if it is open, and reset the fd variable
correctly.
By making use of this new scheme we can drop a > 200 lines of code that
was required to test for non-negative fds or to reset the closed fd
variable afterwards.
|
|
them fully log out
|
|
../src/login/logind-dbus.c:1352: error: undefined reference to 'manager_set_lid_switch_ignore'
collect2: error: ld returned 1 exit status
make[2]: *** [test-login-tables]
|
|
This way each user allocates from his own pool, with its own size limit.
This puts the size limit by default to 10% of the physical RAM size but
makes it configurable in logind.conf.
|
|
startup
This is needed to give USB docking stations and suchlike time to settle,
so that a display connected to an USB docking station can actually act
as a lid swith inhibitor correctly.
With this change we should have somewhat reliable docking station
support in place.
|
|
As pointed-out by clang -Wunreachable-code.
No behaviour changes.
|
|
processing
This should make operation nicer with docking stations, but will not
cover anything that does not implement SW_DOCK.
|
|
sleep immediately again
This is quite useful on laptops such as the Lenovo Yoga, where the power
button is placed on the front side of the laptop and can be pressed by
accident even if the lid is closed.
This reworks a bit of the logind logic to repeatedly try to suspend the
system as long as a lid is closed. We use the new "post" event source
for this, so that we don't keep things busy.
This also adds some code to check the lid status on boot, so that a
powered-off machine that is accidentaly powered on goes into suspend
immediately.
Yay! From now on I can put my Yoga safely in my backpack without fearing
that it might turn itself on and drain the battery.
|
|
first (or second)
Previously the returned object of constructor functions where sometimes
returned as last, sometimes as first and sometimes as second parameter.
Let's clean this up a bit. Here are the new rules:
1. The object the new object is derived from is put first, if there is any
2. The object we are creating will be returned in the next arguments
3. This is followed by any additional arguments
Rationale:
For functions that operate on an object we always put that object first.
Constructors should probably not be too different in this regard. Also,
if the additional parameters might want to use varargs which suggests to
put them last.
Note that this new scheme only applies to constructor functions, not to
all other functions. We do give a lot of freedom for those.
Note that this commit only changes the order of the new functions we
added, for old ones we accept the wrong order and leave it like that.
|
|
|
|
Currently if the user logs out, the GC may never call user_stop(),
this will not terminate the systemd user and (sd-pam) of that user.
To fix this, remove the USER_CLOSING state check that is blocking the
GC from calling user_stop(). Since if user_check_gc() returns false
this means that all the sessions of the user were removed which will
make user_get_state() return USER_CLOSING.
Conclusion: that test will never be statisfied.
So we remove the USER_CLOSING check and replace it with a check inside
user_stop() this way we know that user_stop() has already queued stop
jobs, no need to redo.
This ensures that the GC will get its two steps correctly as pointed out
by Lennart:
http://lists.freedesktop.org/archives/systemd-devel/2014-February/016825.html
Note: this also fixes another bug that prevents creating the user
private dbus socket which will break communications with the user
manager.
|
|
KillUserProcesses=yes/no should be ignored when termination is
explicitly requested.
|
|
Simplify the shutdown logic a bit:
- Keep the session FIFO around in the PAM module, even after the session
shutdown hook has been finished. This allows logind to track precisely
when the PAM handler goes away.
- In the ReleaseSession() call start a timer, that will stop terminate
the session when elapsed.
- Never fiddle with the KillMode of scopes to configure whether user
processes should be killed or not. Instead, simply leave the scope
units around when we terminate a session whose processes should not be
killed.
- When killing is enabled, stop the session scope on FIFO EOF or after
the ReleaseSession() timeout. When killing is disabled, simply tell
PID 1 to abandon the scope.
Because the scopes stay around and hence all processes are always member
of a scope, the system shutdown logic should be more robust, as the
scopes can be shutdown as part of the usual shutdown logic.
|
|
matches
Instead of checking each device after we got it, check wuth an
enumeration filter instead, to make it more efficient.
|
|
udev initialization
Managers shouldn't pick up the devices the manage before udev finished
initialization, hence check explicitly for that.
|
|
We really should return errors from event handlers if we have a
continous problem and don't know any other solution.
|
