summaryrefslogtreecommitdiff
path: root/src/login/logind.h
AgeCommit message (Collapse)Author
2015-06-25logind: fix delayed execution regressionDaniel Mack
Commit c0f32805 ("logind: use sd_event timer source for inhibitor logic") reworked the main loop logic of logind so that it uses a real timeout callback handler to execute delayed functions. What the old code did, however, was to call those functions on every iteration in the main loop, not only when the timeout expired. Restore that behavior by bringing back manager_dispatch_delayed(), and call it from manager_run(). The internal event source callback manager_inhibit_timeout_handler() was turned into a wrapper of manager_dispatch_delayed() now.
2015-06-17logind: rework display counting when detecting whether the system is dockedLennart Poettering
Previously, we'd just count connected displays, and if there was 2 or more we assumed a "docked" state. With this change we now: - Only count external displays, ignore internal ones (which we detect by checking the connector name against a whitelist of known external plug types) - We ignore connectors which are explicitly disabled - We then compare the count with >= 1 rather than >= 2 as before This new logic has the benefit that systems that disconnect the internal display when the lid is closed are better supported. Also, explicitly disabled ports do not confuse the algorithm anymore. This new algorithm has been suggested here: http://lists.freedesktop.org/archives/intel-gfx/2015-June/068821.html This also makes two functions static, that are not used outside of their .c files.
2015-04-29sd-bus: drop bus parameter from message callback prototypeLennart Poettering
This should simplify the prototype a bit. The bus parameter is redundant in most cases, and in the few where it matters it can be derived from the message via sd_bus_message_get_bus().
2015-04-24logind: add support for /run/nologin and /run/systemd/shutdown/scheduledDaniel Mack
Port over more code from shutdownd and teach logind to write /run/nologin at least 5 minutes before the system is going down, and /run/systemd/shutdown/scheduled when a shutdown is scheduled.
2015-04-24logind: add code for UTMP wall messagesDaniel Mack
Add a timer to print UTMP wall messages so that it repeatedly informs users about a scheduled shutdown: * every 1 minute with less than 10 minutes to go * every 15 minutes with less than 60 minutes to go * every 30 minutes with less than 180 minutes (3 hours) to go * every 60 minutes if more than that to go This functionality only active if the .EnableWallMessages DBus property is set to true. Also, a custom string can be added to the wall message, set through the WallMessagePrefix property.
2015-04-24logind: add .ScheduleShutdown and .CancelScheduledShutdown methodsDaniel Mack
Add a method called ScheduleShutdown in org.freedesktop.login1.Manager which adds a timer to shut down the system at a later point in time. The first argument holds the type of the schedule that is about to happen, and must be one of 'reboot', 'halt' or 'poweroff'. The second argument specifies the absolute time, based on CLOCK_REALTIME in nanoseconds, at which the the operation should be executed. To cancel a previously scheduled shutdown, the CancelScheduledShutdown() can be called, which returns a bool, indicating whether a scheduled timeout was cancelled. Also add a new property called ScheduledShutdown which returns the equivalent to what was passed in via ScheduleShutdown, as '(st)' type.
2015-04-24logind: make local functions staticDaniel Mack
make manager_gc(), manager_startup(), manager_new(), manager_free() and manager_run() static, and kill their forward declarations.
2015-04-24logind: use sd_event timer source for inhibitor logicDaniel Mack
Instead of open-coding the delayed action and inhibit timeout logic, switch over to a real sd_event_source based implementation. This is not only easier to read but also allows us to add more timers in the future.
2015-03-06login: make hold-off timeout configurableDavid Herrmann
This introduces 'HoldoffTimeoutSec' to logind.conf to make IGNORE_LID_SWITCH_{SUSPEND,STARTUP}_USEC configurable. Background: If an external monitor is connected, or if the system is docked, we want to ignore LID events. This is required to support setups where a laptop is used with external peripherals while the LID is closed. However, this requires us to probe all hot-plugged devices before reacting to LID events. But with modern buses like USB, the standards do not impose any timeout on the slots, so we have no chance to know whether a given slot is used or not. Hence, after resume and startup, we have to wait a fixed timeout to give the kernel a chance to probe devices. Our timeout has always been generous enough to support even the slowest devices. However, a lot of people didn't use these features and wanted to disable the hold-off timer. Now we provide a knob to do that.
2015-02-23remove unused includesThomas Hindoe Paaboel Andersen
This patch removes includes that are not used. The removals were found with include-what-you-use which checks if any of the symbols from a header is in use.
2015-01-09logind: when a bus call is done on a session, user or seat, optionally ↵Lennart Poettering
determine them from the caller credentials More specifically, if an operation is requested on a session with an empty name, the caller's session is used. If an operation is requested on a seat with an empty name, the seat of the caller's session is used. Finally, if an operation on the user with UID -1 is requested, the user of the client's session is used (and not the UID of the client!).
2014-08-26logind: add HandleLidSwitchDocked= option to logind.conf + documentationBen Wolsieffer
https://bugs.freedesktop.org/show_bug.cgi?id=82485
2014-03-14logind: automatically remove SysV + POSIX IPC objects when the users owning ↵Lennart Poettering
them fully log out
2014-03-04logind: make $XDG_RUNTIME_DIR a per-user tmpfsLennart Poettering
This way each user allocates from his own pool, with its own size limit. This puts the size limit by default to 10% of the physical RAM size but makes it configurable in logind.conf.
2014-03-03logind: ignore lid switch events for 30s after each suspend and 3min after ↵Lennart Poettering
startup This is needed to give USB docking stations and suchlike time to settle, so that a display connected to an USB docking station can actually act as a lid swith inhibitor correctly. With this change we should have somewhat reliable docking station support in place.
2014-03-03logind: ignore lid switch if more than 1 display is connectedLennart Poettering
Previously we expected the desktop environment to take an inhibitor lock, but this opened a race on boot-up where logind might already be running but no DE is active. Hence, let's move checking for additional displays into logind. This also opens up this logic for other DEs, given that only GNOME implemented the inhibitor logic so far.
2014-02-24logind: detect whether the system is docked, and if it is inhibit lid switch ↵Lennart Poettering
processing This should make operation nicer with docking stations, but will not cover anything that does not implement SW_DOCK.
2014-02-07logind: order all scopes after both systemd-logind.service andLennart Poettering
systemd-user-sessions.service This way at shutdown we can be sure that the sessions go away before the network.
2014-02-07logind: rework session shutdown logicLennart Poettering
Simplify the shutdown logic a bit: - Keep the session FIFO around in the PAM module, even after the session shutdown hook has been finished. This allows logind to track precisely when the PAM handler goes away. - In the ReleaseSession() call start a timer, that will stop terminate the session when elapsed. - Never fiddle with the KillMode of scopes to configure whether user processes should be killed or not. Instead, simply leave the scope units around when we terminate a session whose processes should not be killed. - When killing is enabled, stop the session scope on FIFO EOF or after the ReleaseSession() timeout. When killing is disabled, simply tell PID 1 to abandon the scope. Because the scopes stay around and hence all processes are always member of a scope, the system shutdown logic should be more robust, as the scopes can be shutdown as part of the usual shutdown logic.
2013-11-28logind: make VT numbers unsignedDavid Herrmann
Fix the whole code to use "unsigned int" for vtnr. 0 is an invalid vtnr so we don't need negative numbers at all. Note that most code already assumes it's unsigned so in case there's a negative vtnr, our code may, under special circumstances, silently break. So this patch makes sure all sources of vtnrs verify the validity. Also note that the dbus api already uses unsigned ints.
2013-11-21bus: rework message handlers to always take an error argumentLennart Poettering
Message handler callbacks can be simplified drastically if the dispatcher automatically replies to method calls if errors are returned. Thus: add an sd_bus_error argument to all message handlers. When we dispatch a message handler and it returns negative or a set sd_bus_error we send this as message error back to the client. This means errors returned by handlers by default are given back to clients instead of rippling all the way up to the event loop, which is desirable to make things robust. As a side-effect we can now easily turn the SELinux checks into normal function calls, since the method call dispatcher will generate the right error replies automatically now. Also, make sure we always pass the error structure to all property and method handlers as last argument to follow the usual style of passing variables for return values as last argument.
2013-11-08Remove dead code and unexport some callsLennart Poettering
"make check-api-unused" informs us about code that is not used anymore or that is exported but only used internally. Fix these all over the place.
2013-11-05logind: port logind to libsystemd-busLennart Poettering
2013-09-17logind: rename vtconsole to seat0David Herrmann
The seat->vtconsole member always points to the default seat seat0. Even if VTs are disabled, it's used as default seat. Therefore, rename it to seat0 to correctly state what it is. This also changes the seat files in /run from IS_VTCONSOLE to IS_SEAT0. It wasn't used by any code, yet, so this seems fine. While we are at it, we also remove every "if (s->vtconsole)" as this pointer is always valid!
2013-09-17logind: add infrastructure to watch busnamesDavid Herrmann
If we want to track bus-names to allow exclusive resource-access, we need a way to get notified when a bus-name is gone. We make logind watch for NameOwnerChanged dbus events and check whether the name is currently watched. If it is, we remove it from the watch-list (notification for other objects can be added in follow-up patches).
2013-09-17logind: listen actively for session devicesDavid Herrmann
Session compositors need access to fbdev, DRM and evdev devices if they control a session. To make logind pass them to sessions, we need to listen for them actively. However, we avoid creating new seats for non master-of-seat devices. Only once a seat is created, we start remembering all other session devices. If the last master-device is removed (even if there are other non-master devices still available), we destroy the seat. This is the current behavior, but we need to explicitly implement it now as there may be non-master devices in the seat->devices list. Unlike master devices, we don't care whether our list of non-master devices is complete. We don't export this list but use it only as cache if sessions request these devices. Hence, if a session requests a device that is not in the list, we will simply look it up. However, once a session requested a device, we must be notified of "remove" udev events. So we must link the devices somehow into the device-list. Regarding the implementation, we now sort the device list by the "master" flag. This guarantees that master devices are at the front and non-master devices at the tail of the list. Thus, we can easily test whether a seat has a master device attached.
2013-08-13logind: restore logic to kill user processes when session endsLennart Poettering
2013-07-10user-sessions: rely on PID 1 to kill sessionsLennart Poettering
As we want to centralized cgroup access we should stop killing the user sessions directly from the systemd-user-sessions service. Instead, rely on PID 1 doing this by adding the right ordering dependencies to the session scope units.
2013-07-02machined: split out machine registration stuff from logindLennart Poettering
Embedded folks don't need the machine registration stuff, hence it's nice to make this optional. Also, I'd expect that machinectl will grow additional commands quickly, for example to join existing containers and suchlike, hence it's better keeping that separate from loginctl.
2013-07-02logind: port over to use scopes+slices for all cgroup stuffLennart Poettering
In order to prepare things for the single-writer cgroup scheme, let's make logind use systemd's own primitives for cgroup management. Every login user now gets his own private slice unit, in which his sessions live in a scope unit each. Also, add user@$UID.service to the same slice, and implicitly start it on first login.
2013-06-20logind: add infrastructure to keep track of machines, and move to slicesLennart Poettering
- This changes all logind cgroup objects to use slice objects rather than fixed croup locations. - logind can now collect minimal information about running VMs/containers. As fixed cgroup locations can no longer be used we need an entity that keeps track of machine cgroups in whatever slice they might be located. Since logind already keeps track of users, sessions and seats this is a trivial addition. - nspawn will now register with logind and pass various bits of metadata along. A new option "--slice=" has been added to place the container in a specific slice. - loginctl gained commands to list, introspect and terminate machines. - user.slice and machine.slice will now be pulled in by logind.service, since only logind.service requires this slice.
2013-01-25logind: rework delay inhibition logicLennart Poettering
- Don't allow any locks to be taken while we are in the process of executing the specific operation, so that apps are not surprised if a suspend/shutdown happens while they rely on their inhibitor. - Get rid of the Resumed signal, it was a bad idea, and redundant due to PrepareForSleep(false), see below. - Always send out PrepareFor{Shutdown,Sleep} signals, instead of only if a delay lock is taken. - Move PrepareForSleep(false) after we come back from the suspend, so that apps can use this as "Resumed" notification. This also has the benefit that apps know when to take a new lock.
2013-01-24logind: send Resumed() signal after we come back from ↵Lennart Poettering
suspend/hibernate/hybrid-sleep This allows clients to get asynchronous notifications for user-requested suspend/hibernate cycles. Kernel-triggered automatic suspending is not covered.
2013-01-24logind: only allow one shutdown/sleep action to be queued at the same timeLennart Poettering
This should make sure that closing the lid while shutting down won't suspend the machine but will simply cause the shutdown to complete.
2012-12-24logind: add support for automatic suspend/hibernate/shutdown on idleLennart Poettering
2012-09-21logind: split up HandleSleepKey= into HandleSuspendKey= and HandleHibernateKey=Lennart Poettering
The kernel and X11 distuingish these two, and Thinkpad keys have both, hence we really should distinguish them too.
2012-09-19logind: rework power key/suspend key/lid switch handlingLennart Poettering
http://lists.freedesktop.org/archives/systemd-devel/2012-September/006604.html https://bugzilla.gnome.org/show_bug.cgi?id=680689 This changes the meaning of the HandlePowerKey=/HandleSleepKey=/HandleLidSwitch= setting of logind.conf
2012-09-17logind: make sure there's always a getty available on TTY6Lennart Poettering
Previously, if X allocated all 6 TTYs (for multi-session for example) no getty would be available anymore to guarantee console-based logins. With the new ReserveVT= switch in logind.conf we can now choose one VT (6 by default) that will always be subject to autovt-style activation, i.e. we'll always have a getty on TTY6, and X will never take possession of it.
2012-07-19use #pragma once instead of foo*foo #define guardsShawn Landden
#pragma once has been "un-deprecated" in gcc since 3.3, and is widely supported in other compilers. I've been using and maintaining (rebasing) this patch for a while now, as it annoyed me to see #ifndef fooblahfoo, etc all over the place, almost arrogant about the annoyance of having to define all these names to perform a commen but neccicary functionality, when a completely superior alternative exists. I havn't sent it till now, cause its kindof a style change, and it is bad voodoo to mess with style that has been established by more established editors. So feel free to lambast me as a crazy bafoon. v2 - preserve externally used headers
2012-05-31logind: properly clean up user cgroups when they run emptyLennart Poettering
2012-05-30logind: optionally handle power, sleep and lid switch eventsLennart Poettering
This takes handling of chassis power and sleep keys as well as the lid switch over from acpid. This logic is enabled by default for power and sleep keys, but not for the lid switch. If a graphical session is in the foreground no action is taken under the assumption that the graphical session does this.
2012-05-08logind: implement suspend/hibernate calls with inhibition logicLennart Poettering
2012-05-05logind: implement delay inhibitor locks in addition to block inhibitor locksLennart Poettering
This is useful to allow applications to synchronously save data before the system is suspended or shut down.
2012-04-16logind: add shutdown/suspend/idle inhibition frameworkLennart Poettering
2012-04-12relicense to LGPLv2.1 (with exceptions)Lennart Poettering
We finally got the OK from all contributors with non-trivial commits to relicense systemd from GPL2+ to LGPL2.1+. Some udev bits continue to be GPL2+ for now, but we are looking into relicensing them too, to allow free copy/paste of all code within systemd. The bits that used to be MIT continue to be MIT. The big benefit of the relicensing is that closed source code may now link against libsystemd-login.so and friends.
2012-04-10util: move all to shared/ and split external dependencies in separate ↵Kay Sievers
internal libraries Before: $ ldd /lib/systemd/systemd-timestamp linux-vdso.so.1 => (0x00007fffb05ff000) libselinux.so.1 => /lib64/libselinux.so.1 (0x00007f90aac57000) libcap.so.2 => /lib64/libcap.so.2 (0x00007f90aaa53000) librt.so.1 => /lib64/librt.so.1 (0x00007f90aa84a000) libc.so.6 => /lib64/libc.so.6 (0x00007f90aa494000) /lib64/ld-linux-x86-64.so.2 (0x00007f90aae90000) libdl.so.2 => /lib64/libdl.so.2 (0x00007f90aa290000) libattr.so.1 => /lib64/libattr.so.1 (0x00007f90aa08a000) libpthread.so.0 => /lib64/libpthread.so.0 (0x00007f90a9e6e000) After: $ ldd systemd-timestamp linux-vdso.so.1 => (0x00007fff3cbff000) libselinux.so.1 => /lib64/libselinux.so.1 (0x00007f5eaa1c3000) librt.so.1 => /lib64/librt.so.1 (0x00007f5ea9fbb000) libc.so.6 => /lib64/libc.so.6 (0x00007f5ea9c04000) /lib64/ld-linux-x86-64.so.2 (0x00007f5eaa3fc000) libdl.so.2 => /lib64/libdl.so.2 (0x00007f5ea9a00000) libpthread.so.0 => /lib64/libpthread.so.0 (0x00007f5ea97e4000)
2012-01-31logind: if we have to stop a session, kill at least its leaderLennart Poettering
2011-12-31logind: move logind into its own subdirectoryLennart Poettering