| Age | Commit message (Collapse) | Author |
|---|
|
After all, it is ultimately linked to libsystems.so anyway, thus belongs
there and shares very little with the rest of logind, hence let's move
this away.
|
|
peers
This is supposed to be an extension of SO_PEERCRED and SO_PEERSEC,
except for cgroup information.
|
|
them fully log out
|
|
|
|
../src/login/logind-dbus.c:1352: error: undefined reference to 'manager_set_lid_switch_ignore'
collect2: error: ld returned 1 exit status
make[2]: *** [test-login-tables]
|
|
sd_bus_path_{encode,decode}()
The new calls work similarly, but enforce a that a common, fixed bus
path prefix is used.
This follows discussions with Simon McVittie on IRC that it should be a
good idea to make sure that people don't use the escaping applied here
too wildly as anything other than the last label of a bus path.
|
|
udev_device_get_parent() may return NULL when the device doesn't have a
parent, as is the case with (for example) /sys/devices/virtual/drm/ttm.
Also, log an actual error message instead of "-12 displays connected".
|
|
If the session already exists then the only way to log it is to set the
debug option of pam_systemd. There are no debug messages in the login
service that permits to log if the session already exists.
So just add it, and while we are it add the "uid" field to the debug
message that indicates that the session was created.
|
|
|
|
Bring some arrays that are used for DEFINE_STRING_TABLE_LOOKUP() in the
same order than the enums they reference.
Also, pass the corresponding _MAX value to the array initalizer where
appropriate.
|
|
|
|
This way each user allocates from his own pool, with its own size limit.
This puts the size limit by default to 10% of the physical RAM size but
makes it configurable in logind.conf.
|
|
This mirrors set_consume and makes the common use a bit nicer.
|
|
|
|
startup
This is needed to give USB docking stations and suchlike time to settle,
so that a display connected to an USB docking station can actually act
as a lid swith inhibitor correctly.
With this change we should have somewhat reliable docking station
support in place.
|
|
|
|
Previously we expected the desktop environment to take an inhibitor
lock, but this opened a race on boot-up where logind might already be
running but no DE is active.
Hence, let's move checking for additional displays into logind. This
also opens up this logic for other DEs, given that only GNOME
implemented the inhibitor logic so far.
|
|
|
|
If we evict a session position, we open the position slot for future
sessions. However, there might already be another session on the same
position if both were started on the same VT. This is currently done if
gdm spawns the session on its own Xserver.
Hence, look for such a session on pos-eviction and claim the new slot
immediately.
|
|
GREEDY_REALLOC takes a pointer to the real size, not the array-width as
argument. Therefore, our array is currently way to small to keep the seat
positions.
Introduce GREEDY_REALLOC0_T() as typed version of GREEDY_REALLOC and store
the array-width instead of array-size.
|
|
As pointed-out by clang -Wunreachable-code.
No behaviour changes.
|
|
processing
This should make operation nicer with docking stations, but will not
cover anything that does not implement SW_DOCK.
|
|
sleep immediately again
This is quite useful on laptops such as the Lenovo Yoga, where the power
button is placed on the front side of the laptop and can be pressed by
accident even if the lid is closed.
This reworks a bit of the logind logic to repeatedly try to suspend the
system as long as a lid is closed. We use the new "post" event source
for this, so that we don't keep things busy.
This also adds some code to check the lid status on boot, so that a
powered-off machine that is accidentaly powered on goes into suspend
immediately.
Yay! From now on I can put my Yoga safely in my backpack without fearing
that it might turn itself on and drain the battery.
|
|
utf8 needs to be initialized to NULL for the free for the early return,
otherwise we try to free invalid data.
|
|
first (or second)
Previously the returned object of constructor functions where sometimes
returned as last, sometimes as first and sometimes as second parameter.
Let's clean this up a bit. Here are the new rules:
1. The object the new object is derived from is put first, if there is any
2. The object we are creating will be returned in the next arguments
3. This is followed by any additional arguments
Rationale:
For functions that operate on an object we always put that object first.
Constructors should probably not be too different in this regard. Also,
if the additional parameters might want to use varargs which suggests to
put them last.
Note that this new scheme only applies to constructor functions, not to
all other functions. We do give a lot of freedom for those.
Note that this commit only changes the order of the new functions we
added, for old ones we accept the wrong order and leave it like that.
|
|
If -flto is used then gcc will generate a lot more warnings than before,
among them a number of use-without-initialization warnings. Most of them
without are false positives, but let's make them go away, because it
doesn't really matter.
|
|
|
|
At login there is a small race window where session_get_state() will
return SESSION_ACTIVE instead of SESSION_OPENING. This must be fixed
since during that time there are calls to session_save() to save
session states and we want to write the correct state.
When we queue the start scope and service jobs, we wait for both of them
to finish before calling and continue processing in:
"session_jobs_reply() => session_send_create_reply()"
to create the session fifo and notify clients.
However, in the match_job_removed() D-Bus signal, we may hit situations
where the scope job has successfully finished and we are still waiting
for the user service job to finish. During that time the
"session->scope_job" will be freed and set to NULL, this makes
session_get_state() return SESSION_ACTIVE before it is really active, it
should return SESSION_OPENING since we are still waiting for the service
job to finish in order to create the session fifo.
To fix this, we also check if the session fifo fd was created, if so then
the session has entered the SESSION_ACTIVE state, if not then it is still
in the SESSION_OPENING state and it is waiting for the scope and service
jobs to finish.
|
|
Currently if the user logs out, the GC may never call user_stop(),
this will not terminate the systemd user and (sd-pam) of that user.
To fix this, remove the USER_CLOSING state check that is blocking the
GC from calling user_stop(). Since if user_check_gc() returns false
this means that all the sessions of the user were removed which will
make user_get_state() return USER_CLOSING.
Conclusion: that test will never be statisfied.
So we remove the USER_CLOSING check and replace it with a check inside
user_stop() this way we know that user_stop() has already queued stop
jobs, no need to redo.
This ensures that the GC will get its two steps correctly as pointed out
by Lennart:
http://lists.freedesktop.org/archives/systemd-devel/2014-February/016825.html
Note: this also fixes another bug that prevents creating the user
private dbus socket which will break communications with the user
manager.
|
|
Otherwise we get a (harmless) message like:
systemd-logind[30845]: Failed to process message [type=signal sender=:1.36 path=/org/freedesktop/systemd1/job/4674 interface=org.freedesktop.DBus.Properties member=PropertiesChanged signature=sa{sv}as]: Invalid argument
|
|
KillUserProcesses=yes/no should be ignored when termination is
explicitly requested.
|
|
In function user_get_state() remove the session_is_active() check, just
count on the session_get_state() function to get the correct session
state.
session_is_active() may return true before starting the session scope
and user service, this means it will return true even before the creation
of the session fifo_fd which will produce incorrect states.
So be consistent and just use session_get_state().
|
|
or services) as machine with machined
|
|
|
|
|
|
|
|
|
|
systemd-user-sessions.service
This way at shutdown we can be sure that the sessions go away before the
network.
|
|
The session_send_create_reply() function which notifies clients about
session creation is used for both session and user units. Unify the
shared code in a new function session_jobs_reply().
The session_save() will be called unconditionally on sessions since it
does not make sense to only call it if '!session->started', this will
also allow to update the session state as soon as possible.
|
|
without working cgroup empty notifications there's no need to set the
stop timeout of sessions scopes low
|
|
Simplify the shutdown logic a bit:
- Keep the session FIFO around in the PAM module, even after the session
shutdown hook has been finished. This allows logind to track precisely
when the PAM handler goes away.
- In the ReleaseSession() call start a timer, that will stop terminate
the session when elapsed.
- Never fiddle with the KillMode of scopes to configure whether user
processes should be killed or not. Instead, simply leave the scope
units around when we terminate a session whose processes should not be
killed.
- When killing is enabled, stop the session scope on FIFO EOF or after
the ReleaseSession() timeout. When killing is disabled, simply tell
PID 1 to abandon the scope.
Because the scopes stay around and hence all processes are always member
of a scope, the system shutdown logic should be more robust, as the
scopes can be shutdown as part of the usual shutdown logic.
|
|
Use PID_FMT/USEC_FMT/... in more places.
Also update logind error messages to print the full path to a file that
failed. This should make debugging easier for people who do not know
off the top of their head where logind stores it state.
|
|
This is initialized from XDG_SESSION_DESKTOP and is useful for GNOME
to recognize its own sessions. It's supposed to be set to a short string
identifying the session, such as "kde" or "gnome".
|
|
If the session type/class is set via environment variables, use that,
and otherwise fallback to something that is set via the PAM module
command line.
|
|
|
|
logind considers it an error for a seat other than seat0 to have a
non-zero vtnr for CreateSession
|
|
Compat stuff is moved to src/compat-libs/.
Warnings are issued when programs are linked with the deprecated library.
|
|
A compatibility libsystemd-login library is created which uses
.symver and ifunc magic proposed by Lennart to make programs linked
to the old library name continue to work seamlessly.
Unfortunately the bfd linker crashes:
https://sourceware.org/bugzilla/show_bug.cgi?id=16467
This will be fixed in binutils 2.25.
As a work-around, gold can be used:
LDFLAGS=-Wl,-fuse-ld=gold
Unfortunately the switch to pick the linker appeared in gcc 4.8.
This also doesn't work with LLVM:
http://llvm.org/bugs/show_bug.cgi?id=11897
|
|
logind has no concept of session ordering. Sessions have a unique name,
some attributes about the capabilities and that's already it. There is
currently no stable+total order on sessions. If we use the logind API to
switch between sessions, we are faced with an unordered list of sessions
we have no clue of.
This used to be no problem on seats with VTs or on seats with only a
single active session. However, with the introduction of multi-session
capability for seats without VTs, we need to find a way to order sessions
in a stable way.
This patch introduces session "positions". A position is a simple integer
assigned to a session which is never changed implicitly (currently, we
also don't change it explicitly, but that may be changed someday). For
seats with VTs, we force the position to be the same as the VTnr. Without
VTs, we simply find the lowest unassigned number and use it as position.
If position-assignment fails or if, for any reason, we decide to not
assign a position to a session, the position is set to 0 (which is treated
as invalid position).
During session_load() or if two sessions have the same VTnr, we may end up
with two sessions with the same position (this shouldn't happen, but lets
be fail-safe in case some other part of the stack fails). This case is
dealt with gracefully by ignoring any session but the first session
assigned to the position. Thus, session->pos is a hint, seat->positions[i]
is the definite position-assignment. Always verify both match in case you
need to modify them!
Additionally, we introduce SwitchTo(unsigned int) on the seat-dbus-API.
You can call it with any integer value != 0 and logind will try to switch
to the request position. If you implement a compositor or any other
session-controller, you simply watch for ctrl+alt+F1 to F12 and call
SwitchTo(Fx). logind will figure a way out deal with this number.
For convenience, we also introduce SwitchToNext/Previous(). It should be
called on ctrl+alt+Left/Right (like the kernel-console used to support).
Note that the public API (SwitchTo*()) is *not* bound to the underlying
logic that is implemented now. We don't export "session-positions" on the
dbus/C API! They are an implementation detail. Instead, the SwitchTo*()
API is supposed to be a hint to let logind choose the session-switching
logic. Any foreground session-controller is free to enumerate/order
existing sessions according to their needs and call Session.Activate()
manually. But the SwitchTo*() API provides a uniform behavior across
session-controllers.
Background: Session-switching keys depend on the active keymap. The XKB
specification provides the XKB_KEY_XF86Switch_VT_1-12 key-symbols which
have to be mapped by all keymaps to allow session-switching. It is usually
bound to ctrl+alt+Fx but may be set differently. A compositor passes any
keyboard input to XKB before passing it to clients. In case a key-press
invokes the XKB_KEY_XF86Switch_VT_x action, the keypress is *not*
forwarded to clients, but instead a session-switch is scheduled.
This actually prevents us from handling these keys outside of the session.
If an active compositor has a keymap with a different mapping of these
keys, and logind itself tries to catch these combinations, we end up with
the key-press sent to the compositor's clients *and* handled by logind.
This is *bad* and we must avoid this. The only situation where a
background process is allowed to handle key-presses is debugging and
emergency-keys. In these cases, we don't care for keymap mismatches and
accept the double-event. Another exception is unmapped keys like
PowerOff/Suspend (even though this one is controversial).
|
|
X11 never made use of it anyway and it's probably better to just push
$DISPLAY into the systemd daemon from gnome-session (or equivalent
program) than to change libX11 to look for this socket. In particular
since we won't need this for Wayland anyway and we shouldn't add
infrastructure for stuff that's on its way out anyway.
|
