summaryrefslogtreecommitdiff
path: root/src/login
AgeCommit message (Collapse)Author
2015-08-03logind: add standard gpio power button supportKefeng Wang
Many boards like hisilicon D02 board use standard gpio key to power down system. A description of gpio-key in dts shown below, gpio_keys { compatible = "gpio-keys"; #address-cells = <1>; #size-cells = <0>; pwrbutton { label = "Power Button"; gpios = <&porta 8 1>; linux,code = <116>; // KEY_POWER, used by SC System Power Down }; }; -bash-4.3# udevadm info -a /dev/input/event3 Udevadm info starts with the device specified by the devpath and then walks up the chain of parent devices. It prints for every device found, all possible attributes in the udev rules key format. A rule to match, can be composed by the attributes of the device and the attributes from one single parent device. looking at device '/devices/platform/gpio_keys/input/input3/event3': KERNEL=="event3" SUBSYSTEM=="input" DRIVER=="" looking at parent device '/devices/platform/gpio_keys/input/input3': KERNELS=="input3" SUBSYSTEMS=="input" DRIVERS=="" ATTRS{name}=="gpio_keys" ATTRS{phys}=="gpio-keys/input0" ATTRS{uniq}=="" ATTRS{properties}=="0" looking at parent device '/devices/platform/gpio_keys': KERNELS=="gpio_keys" SUBSYSTEMS=="platform" DRIVERS=="gpio-keys" ATTRS{keys}=="116" ATTRS{switches}=="" ATTRS{driver_override}=="(null)" ATTRS{disabled_keys}=="" ATTRS{disabled_switches}=="" looking at parent device '/devices/platform': KERNELS=="platform" SUBSYSTEMS=="" DRIVERS==""
2015-07-31tree-wide: introduce mfree()David Herrmann
Pretty trivial helper which wraps free() but returns NULL, so we can simplify this: free(foobar); foobar = NULL; to this: foobar = mfree(foobar);
2015-07-31logind: release VT-positions when closing sessionsDavid Herrmann
Make sure we release VT-positions when a session is closed. Otherwise, lingering sessions will occupy VTs and prevent next logins from succeeding. Note that we already release session-devices when closing a session, so there cannot be anyone using the VT anymore.
2015-07-30tree-wide: use free_and_strdup()Daniel Mack
Use free_and_strdup() where appropriate and replace equivalent, open-coded versions.
2015-07-29tree-wide: port everything over to fflush_and_check()Lennart Poettering
Some places invoked fflush() directly with their own manual error checking, let's unify all that by using fflush_and_check(). This also unifies the general error paths of fflush()+rename() file writers.
2015-07-21logind: fix write_string_file() falloutDaniel Mack
WRITE_STRING_FILE_ATOMIC is only valid if WRITE_STRING_FILE_CREATE is also given. IOW, an atomic file write operation is only possible when creating a file is also being asked for. This is a regression from the recent write_string_file() rework.
2015-07-16logind: never select closing sessions for a VTDavid Herrmann
If a session is in closing state (and already got rid of its VT), then never re-select it for that VT. There is no reason why we should grant something to a session that is already going away *AND* already got rid of exactly that.
2015-07-16logind: prefer new sessions over older ones on VT switchesDavid Herrmann
Our seat->positions[] array keeps track of the 'preferred' session on a VT. The only situation this is used, is to select the session to activate when a VT is activated. In the normal case, there's only one session per VT so the selection is trivial. Older greeters, however, implement take-overs when they start sessions on the same VT that the greeter ran on. We recently limited such take-overs to VTs where a greeter is running on, to force people to never share VTs in new code that is written. For legacy reasons, we need to be compatible to old greeters, though. Hence, we allow those greeters to implement take-over. In such take-overs, however, we should really make sure that the new sessions gets preferred over the old one under all circumstances. Hence, make sure we override the previous preferred session with a new session.
2015-07-11logind: bring bus policy up-to-dateLennart Poettering
A while back we opened up all of logind's bus calls to unprivileged users, via PK. However, the dbus1 policy wasn't updated accordingly. With this change, the dbus1 policy is opened up for all bus calls that should be available to unprivileged clients. (also rearranges some calls in the vtable, to make more sense, and be in line with the order in the bus policy file) Fixes #471.
2015-07-10logind: rename 'pos' to 'position'David Herrmann
Spell out the proper name. Use 'pos' over 'position', and also update the logind state file to do the same. Note that this breaks live updates. However, we only save 'POSITION' on non-seat0, so this shouldn't bother anyone for real. If you run multi-seat setups, you better restart a machine on updates, anyway.
2015-07-10logind: allow greeters to take over VTsDavid Herrmann
Make sure a greeter can forcefully spawn a session on a VT that is in-use. A recent patch prevented this (this used to be possible for all session types) as it is highly fragile. However, as it turns out, greeters seem to rely on that feature. Therefore, make sure we allow it explicitly for greeters.
2015-07-08Merge pull request #516 from utezduyar/consistent-get-callback-returnLennart Poettering
property callback returns are consistent
2015-07-08Merge pull request #500 from zonque/fileioLennart Poettering
fileio: consolidate write_string_file*()
2015-07-08property callback returns are consistentUmut Tezduyar Lindskog
It is no different to return 0 over 1 in the property callback. It is confusing to return 1 which made me think 1 has a special purpose. This way code is consistent with the rest of the tree.
2015-07-07logind: fail on CreateSession if already in sessionDavid Herrmann
Right now, if you're already in a session and call CreateSession, we return information about the current session of yours. This is highy confusing and a nasty hack. Avoid that, and instead return a commonly known error, so the caller can detect that. This has the side-effect, that we no longer override XDG_VTNR and XDG_SEAT in pam_systemd, if you're already in a session. But this sounds like the right thing to do, anyway.
2015-07-07logind: allow sessions to share a VT if it's a greeterDavid Herrmann
Old gdm and lightdm start the user-session during login before they destroy the greeter-session. Therefore, the user-session will take over the VT from the greeter. We recently prevented this by never allowing multiple sessions on the same VT. Fix this now, by explicitly allowing this if the owning session is a GREETER. Note that gdm no longer behaves like this. Instead, due to wayland, they always use a different VT for each session. All other login-managers are highly encouraged to destroy the greeter-session _before_ starting the user-session. We now work around this, but this will probably not last forever (and will already have nasty side-effects on the greeter-session).
2015-07-06Merge pull request #502 from keszybz/login-small-cleanupDaniel Mack
Login small cleanup
2015-07-06treewide: fix typos of let'sZbigniew Jędrzejewski-Szmek
2015-07-06login: use normal comparison to zero for integersZbigniew Jędrzejewski-Szmek
! is supposed to be used for booleans and pointers.
2015-07-06fileio: consolidate write_string_file*()Daniel Mack
Merge write_string_file(), write_string_file_no_create() and write_string_file_atomic() into write_string_file() and provide a flags mask that allows combinations of atomic writing, newline appending and automatic file creation. Change all users accordingly.
2015-07-06treewide: fix typosTorstein Husebø
2015-07-05login: simplify assignmentZbigniew Jędrzejewski-Szmek
2015-07-03sd-bus: introduce new sd_bus_flush_close_unref() callLennart Poettering
sd_bus_flush_close_unref() is a call that simply combines sd_bus_flush() (which writes all unwritten messages out) + sd_bus_close() (which terminates the connection, releasing all unread messages) + sd_bus_unref() (which frees the connection). The combination of this call is used pretty frequently in systemd tools right before exiting, and should also be relevant for most external clients, and is hence useful to cover in a call of its own. Previously the combination of the three calls was already done in the _cleanup_bus_close_unref_ macro, but this was only available internally. Also see #327
2015-07-02login: add rule for qemu's pci-bridge-seatGerd Hoffmann
Qemu provides a separate pci-bridge exclusively for multi-seat setups. The normal pci-pci bridge ("-device pci-bridge") has 1b36:0001. The new pci-bridge-seat was specifically added to simplify guest-side multiseat configuration. It is identical to the normal pci-pci bridge, except that it has a different id (1b36:000a) so we can match it and configure multiseating automatically. Make sure we always treat this as separate seat if we detect this, just like other "Pluggable" devices. (David: write commit-message)
2015-07-01login: re-use VT-sessions if they already existDavid Herrmann
Right now, if you start a session via 'su' or 'sudo' from within a session, we make sure to re-use the existing session instead of creating a new one. We detect this by reading the session of the requesting PID. However, with gnome-terminal running as a busname-unit, and as such running outside the session of the user, this will no longer work. Therefore, this patch makes sure to return the existing session of a VT if you start a new one. This has the side-effect, that you will re-use a session which your PID is not part of. This works fine, but will break assumptions if the parent session dies (and as such close your session even though you think you're part of it). However, this should be perfectly fine. If you run multiple logins on the same session, you should really know what you're doing. The current way of silently accepting it but choosing the last registered session is just weird.
2015-06-25logind: fix delayed execution regressionDaniel Mack
Commit c0f32805 ("logind: use sd_event timer source for inhibitor logic") reworked the main loop logic of logind so that it uses a real timeout callback handler to execute delayed functions. What the old code did, however, was to call those functions on every iteration in the main loop, not only when the timeout expired. Restore that behavior by bringing back manager_dispatch_delayed(), and call it from manager_run(). The internal event source callback manager_inhibit_timeout_handler() was turned into a wrapper of manager_dispatch_delayed() now.
2015-06-21pam_systemd: Properly check kdbus availabilityJan Alexander Steffens (heftig)
This properly avoids setting DBUS_SESSION_BUS_ADDRESS if kdbus is loaded (or built into the kernel) but not wanted.
2015-06-17Merge pull request #265 from smcv/logind-runtimedir-race-write-earlierLennart Poettering
logind: save /run/systemd/users/UID before starting user@.service
2015-06-17Merge pull request #263 from kaysievers/wipKay Sievers
turn kdbus support into a runtime option
2015-06-17Merge pull request #259 from poettering/logind-label-fixTom Gundersen
logind: apply selinux label to XDG_RUNTIME_DIR
2015-06-17logind: save /run/systemd/users/UID before starting user@.serviceSimon McVittie
Previously, this had a race condition during a user's first login. Some component calls CreateSession (most likely by a PAM service other than 'systemd-user' running pam_systemd), with the following results: - logind: * create the user's XDG_RUNTIME_DIR * tell pid 1 to create user-UID.slice * tell pid 1 to start user@UID.service Then these two processes race: - logind: * save information including XDG_RUNTIME_DIR to /run/systemd/users/UID - the subprocess of pid 1 responsible for user@service: * start a 'systemd-user' PAM session, which reads XDG_RUNTIME_DIR and puts it in the environment * run systemd --user, which requires XDG_RUNTIME_DIR in the environment If logind wins the race, which usually happens, everything is fine; but if the subprocesses of pid 1 win the race, which can happen under load, then systemd --user exits unsuccessfully. To avoid this race, we have to write out /run/systemd/users/UID even though the service has not "officially" started yet; previously this did an early-return without saving anything. Record its state as OPENING in this case. Bug: https://github.com/systemd/systemd/issues/232 Reviewed-by: Philip Withnall <philip.withnall@collabora.co.uk>
2015-06-17turn kdbus support into a runtime optionKay Sievers
./configure --enable/disable-kdbus can be used to set the default behavior regarding kdbus. If no kdbus kernel support is available, dbus-dameon will be used. With --enable-kdbus, the kernel command line option "kdbus=0" can be used to disable kdbus. With --disable-kdbus, the kernel command line option "kdbus=1" is required to enable kdbus support.
2015-06-17logind: apply selinux label to XDG_RUNTIME_DIRLennart Poettering
As discussed in #257: we should ensure the selinux label is correctly applied to each user's XDG_RUNTIME_DIR.
2015-06-17logind: rework display counting when detecting whether the system is dockedLennart Poettering
Previously, we'd just count connected displays, and if there was 2 or more we assumed a "docked" state. With this change we now: - Only count external displays, ignore internal ones (which we detect by checking the connector name against a whitelist of known external plug types) - We ignore connectors which are explicitly disabled - We then compare the count with >= 1 rather than >= 2 as before This new logic has the benefit that systems that disconnect the internal display when the lid is closed are better supported. Also, explicitly disabled ports do not confuse the algorithm anymore. This new algorithm has been suggested here: http://lists.freedesktop.org/archives/intel-gfx/2015-June/068821.html This also makes two functions static, that are not used outside of their .c files.
2015-06-16Merge pull request #218 from poettering/dual-timestamp-nullDaniel Mack
everywhere: actually make use of DUAL_TIMESTAMP_NULL macro
2015-06-16Merge pull request #219 from poettering/logind-dockedDaniel Mack
logind: expose "Docked" bool as property on the bus
2015-06-16logind: cast close() call to (void)Lennart Poettering
2015-06-16logind: expose "Docked" bool as property on the busLennart Poettering
We know the state anyway, let's expose it in the bus. It's useful for debugging at least, but it might be useful for DEs too.
2015-06-16everywhere: actually make use of DUAL_TIMESTAMP_NULL macroLennart Poettering
Let's use it as initializer where appropriate.
2015-06-15everywhere: port everything to sigprocmask_many() and friendsLennart Poettering
This ports a lot of manual code over to sigprocmask_many() and friends. Also, we now consistly check for sigprocmask() failures with assert_se(), since the call cannot realistically fail unless there's a programming error. Also encloses a few sd_event_add_signal() calls with (void) when we ignore the return values for it knowingly.
2015-06-15Merge pull request #180 from ronnychevalier/rc/coverity_cid_1304686Lennart Poettering
login: fix potential null pointer dereference
2015-06-15login: fix potential null pointer dereferenceRonny Chevalier
Fix CID 1304686: Dereference after null check (FORWARD_NULL) However, this commit does not fix any bug in logind. It helps to keep the elect_display_compare() function generic.
2015-06-14tree-wide: fix memory leaks in users of bus_map_all_properties()David Herrmann
If you use bus_map_all_properties(), you must be aware that it might touch output variables even though it may fail. This is, because we parse many different bus-properties and cannot tell how to clean them up, in case we fail deep down in the parser. Fix all callers of bus_map_all_properties() to correctly cleanup any context structures at all times.
2015-06-11build-sys: split internal basic/ library from shared/Kay Sievers
basic/ can be used by everything cannot use anything outside of basic/ libsystemd/ can use basic/ cannot use shared/ shared/ can use libsystemd/
2015-06-10logind,sd-event: drop spurious new-linesLennart Poettering
2015-06-10tree-wide: whenever we fork off a foreign child process reset signal ↵Lennart Poettering
mask/handlers Also, when the child is potentially long-running make sure to set a death signal. Also, ignore the result of the reset operations explicitly by casting them to (void).
2015-06-05logind: Fix user_elect_display() to be more stablePhilip Withnall
The previous implementation of user_elect_display() could easily end up overwriting the user’s valid graphical session with a new TTY session. For example, consider the situation where there is one session: c1, type = SESSION_X11, !stopping, class = SESSION_USER it is initially elected as the user’s display (i.e. u->display = c1). If another session is started, on a different VT, the sessions_by_user list becomes: c1, type = SESSION_X11, !stopping, class = SESSION_USER c2, type = SESSION_TTY, !stopping, class = SESSION_USER In the previous code, graphical = c1 and text = c2, as expected. However, neither graphical nor text fulfil the conditions for setting u->display = graphical (because neither is better than u->display), so the code falls through to check the text variable. The conditions for this match, as u->display->type != SESSION_TTY (it’s actually SESSION_X11). Hence u->display is set to c2, which is incorrect, because session c1 is still valid. Refactor user_elect_display() to use a more explicit filter and pre-order comparison over the sessions. This can be demonstrated to be stable and only ever ‘upgrade’ the session to a more graphical one. https://bugs.freedesktop.org/show_bug.cgi?id=90769
2015-06-04Merge pull request #58 from pwithnall/wip/pwithnall/user-active-on-vt-switchDavid Herrmann
logind: Save the user’s state when a session enters SESSION_ACTIVE
2015-06-04Merge pull request #57 from pwithnall/wip/pwithnall/udev-virtualbox-rulesDavid Herrmann
logind: Add a udev rule to tag all DRM cards with master-of-seat
2015-06-02logind: Add a udev rule to tag all DRM cards with master-of-seatPhilip Withnall
This is needed for generic DRM devices like the VirtualBox vboxvideo driver, which exposes itself as a generic, ID-less DRM device at /dev/dri/card0 (after applying this commit): $ udevadm info --query=all --path \ /sys/devices/pci0000:00/0000:00:02.0/drm/card0 P: /devices/pci0000:00/0000:00:02.0/drm/card0 N: dri/card0 E: DEVNAME=/dev/dri/card0 E: DEVPATH=/devices/pci0000:00/0000:00:02.0/drm/card0 E: DEVTYPE=drm_minor E: ID_FOR_SEAT=drm-pci-0000_00_02_0 E: ID_PATH=pci-0000:00:02.0 E: ID_PATH_TAG=pci-0000_00_02_0 E: MAJOR=226 E: MINOR=0 E: SUBSYSTEM=drm E: TAGS=:master-of-seat:seat:uaccess: E: USEC_INITIALIZED=59893 Without this patch, the capabilities for a seat on a VirtualBox installation of systemd v219 incorrectly show it as non-graphical, even though I can type these commands from an xterm: $ loginctl show-seat seat0 Id=seat0 CanMultiSession=yes CanTTY=yes CanGraphical=no … https://bugs.freedesktop.org/show_bug.cgi?id=90822