| Age | Commit message (Collapse) | Author |
|---|
|
The internal speaker is usually not available on modern latops that
support suspend, and even if it is available in the hardware, most
distributions turned support for it off in the kernel. And even if it is
enabled, it's probably still a bad idea to make use of it for the
suspend-failures. If anything a proper sound should be played.
Long story short, let's remove support of this anachronism.
|
|
- Rely everywhere that we use abs() on the error code passed in anyway,
thus don't need to explicitly negate what we pass in
- Never attach synthetic error number information to log messages. Only
log about errors we *receive* with the error number we got there,
don't log any synthetic error, that don#t even propagate, but just eat
up.
- Be more careful with attaching exactly the error we get, instead of
errno or unrelated errors randomly.
- Fix one occasion where the error number and line number got swapped.
- Make sure we never tape over OOM issues, or inability to resolve
specifiers
|
|
logind: avoid a dot before parenthesis
|
|
systemd-logind[27]: System is rebooting. (Applied kernel updates.)
is changed to
systemd-logind[27]: System is rebooting (Applied kernel updates).
Users should not add a dot in the sentence in --message, i.e. the correct usage is now:
$ systemctl reboot --message "Applied kernel updates"
|
|
Also add a Coccinell patch to detect such locations in the future.
|
|
In sd-bus, the sd_bus_open_xyz() family of calls allocates a new bus,
while sd_bus_default_xyz() family tries to reuse the thread's default
bus. bus_open_transport() sometimes internally uses the former,
sometimes the latter family, but suggests it only calls the former via
its name. Hence, let's avoid this confusion, and generically rename the
call to bus_connect_transport().
Similar for all related calls.
And while we are at it, also change cgls + cgtop to do direct systemd
connections where possible, since all they do is talk to systemd itself.
|
|
This also allows us to drop build.h from a ton of files, hence do so.
Since we touched the #includes of those files, let's order them properly
according to CODING_STYLE.
|
|
https://bugzilla.redhat.com/show_bug.cgi?id=1262933
|
|
A variety of mostly unrelated fixes
|
|
No need to keep both functions, settle on uid_is_valid() for everything.
|
|
Adding additional keys prevents this gpio-keys powerswitch from working,
e.g. this wouldn't poweroff:
button@23 {
label = "power-switch";
linux,code = <116>;
gpios = <&gpio 23 1>;
};
button@25 {
label = "KEY_A";
linux,code = <30>;
gpios = <&gpio 25 1>;
};
Changing ATTRS{keys}=="116" to ATTRS{keys}=="*116*" makes the
power-switch and the A key both work properly.
(David: rephrase and merge-commits)
|
|
|
|
off_t is a really weird type as it is usually 64bit these days (at least
in sane programs), but could theoretically be 32bit. We don't support
off_t as 32bit builds though, but still constantly deal with safely
converting from off_t to other types and back for no point.
Hence, never use the type anymore. Always use uint64_t instead. This has
various benefits, including that we can expose these values directly as
D-Bus properties, and also that the values parse the same in all cases.
|
|
Allow passing a "dry-" prefix to the action parameter passed to
.ScheduleShutdown(). When strings with this prefix are passed,
the scheduled action will not take place. Instead, an info message
is logged.
|
|
The previous coccinelle semantic patch that improved usage of
log_error_errno()'s return value, only looked for log_error_errno()
invocations with a single parameter after the error parameter. Update
the patch to handle arbitrary numbers of additional arguments.
|
|
Patch via coccinelle.
|
|
Turns this:
r = -errno;
log_error_errno(errno, "foo");
into this:
r = log_error_errno(errno, "foo");
and this:
r = log_error_errno(errno, "foo");
return r;
into this:
return log_error_errno(errno, "foo");
|
|
Replace this:
if (fd >= 0)
safe_close(fd);
by this:
safe_close(fd);
|
|
Replace this:
close(fd);
fd = -1;
write this:
fd = safe_close(fd);
|
|
This replaces this:
free(p);
p = NULL;
by this:
p = mfree(p);
Change generated using coccinelle. Semantic patch is added to the
sources.
|
|
|
|
various fixes to the core, logind, machined, nspawn
|
|
|
|
Extra details for an action can be supplied when calling polkit's
CheckAuthorization method. Details are a list of key/value string pairs.
Custom policy can use these details when making authorization decisions.
|
|
We treat an empty wall-message equal to a NULL wall-message since:
commit 5744f59a3ee883ef3a78214bd5236157acdc35ba
Author: Lennart Poettering <lennart@poettering.net>
Date: Fri Sep 4 10:34:47 2015 +0200
logind: treat an empty wall message like a NULL one
Fix the shutdown scheduler to not deref a NULL pointer, but properly
check for an empty wall-message.
Fixes: #1120
|
|
And not bool.
|
|
|
|
In all cases where the function (or cg_is_empty_recursive()) ignoring
the calling process is actually wrong, as a process keeps a cgroup busy
regardless if its the current one or another. Hence, let's simplify
things and drop the "ignore_self" parameter.
|
|
On Dell and HP laptops the dock state/events (SW_DOCK) come from the "{Dell,HP}
WMI hotkeys" input devices. Tag them as power-switch so that login actually
considers them. Use a general match in case this affects other vendors, too.
Thanks to Andreas Schultz for debugging this!
https://launchpad.net/bugs/1450009
|
|
dbus-1.10 was just released, including systemd units to run
`dbus-daemon --session` as systemd user unit. This allows using a
user-bus with dbus1, just like we do per default with kdbus.
All the dbus libraries have already been fixed long ago to use the
user-bus as default. Hence, there's no need to set
DBUS_SESSION_BUS_ADDRESS= if we use the user-bus. However, gdm and
friends continue to spawn a session bus if this variable is not set
(instead of checking for the existence of the user-bus). Hence, we force
the user-bus, if it is available, in pam_systemd. Once gdm and friends
are fixed, we can continue to drop this again. However, that might take
a while.
With this in place, all that is needed to make the user-bus work is:
`systemctl --global enable dbus.socket`
If dbus.socket is not enabled, the legacy session-bus is still used.
Based on a patch by: Jan Alexander Steffens <jan.steffens@gmail.com>
|
|
Enable unprivileged users to set wall message on a shutdown
operation. When the message is set via the --message option,
it is logged together with the default shutdown message.
$ systemctl reboot --message "Applied kernel updates."
$ journalctl -b -1
...
systemd-logind[27]: System is rebooting. (Applied kernel updates.)
...
|
|
When the controlling process exits, any existing file descriptors
for that FD will be marked as hung-up and ioctls on them will
file with EIO. To work around this, open a new file descriptor
for the VT we want to clean up.
Thanks to Ray Strode for help in sorting out the problem and
coming up with a fix!
https://github.com/systemd/systemd/issues/989
|
|
The open_terminal() function adds retries in case a terminal
is in the process of being closed when we open it, and should
generally be used to open a terminal. We especially need it
for code that a subsequent commit adds that reopens the terminal
at session shut-down time; such races would be more likely in
that case.
Found by Ray Strode.
|
|
The following functions return immediately if a null pointer was passed.
* calendar_spec_free
* link_address_free
* manager_free
* sd_bus_unref
* sd_journal_close
* udev_monitor_unref
* udev_unref
It is therefore not needed that a function caller repeats a corresponding check.
This issue was fixed by using the software Coccinelle 1.0.1.
|
|
Since dacd6cee76a08331b8c8616c5f30f70ee49aa2f9 the two OOM's are
ignored as the value of r will be overwritten and we only log in
the fail section anyway.
This patch jumps to fail on OOM.
Note that this is different behavior compared to both the current
code and previous to dacd6cee76a08331b8c8616c5f30f70ee49aa2f9. Before
that commit we would log that saving the inhibit data failed, but
still write the file, though without the WHO/WHY section.
CID# 1313545
|
|
Use mfree() where we can.
Drop unnecessary {}.
Drop unnecessary variable declarations.
Cast syscall invocations where explicitly don't care for the return
value to (void).
Reword a comment.
|
|
If we get a weird signal, then we should log about it, but not return an
error, since sd-bus will not call us again then anymore, but for these
signals we match here we actually do want to be called on the next
invocation.
|
|
Let logind use the sd_bus_track helper object to track the controllers of
sessions. This does not only remove quite some code but also kills the
unconditional matches for all NameOwnerChanged signals.
The latter is something we should never ever do, as it wakes up the daemon
every time a client connects, which doesn't scale.
|
|
Many boards like hisilicon D02 board use standard gpio key to power down system.
A description of gpio-key in dts shown below,
gpio_keys {
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
pwrbutton {
label = "Power Button";
gpios = <&porta 8 1>;
linux,code = <116>; // KEY_POWER, used by SC System Power Down
};
};
-bash-4.3# udevadm info -a /dev/input/event3
Udevadm info starts with the device specified by the devpath and then
walks up the chain of parent devices. It prints for every device
found, all possible attributes in the udev rules key format.
A rule to match, can be composed by the attributes of the device
and the attributes from one single parent device.
looking at device '/devices/platform/gpio_keys/input/input3/event3':
KERNEL=="event3"
SUBSYSTEM=="input"
DRIVER==""
looking at parent device '/devices/platform/gpio_keys/input/input3':
KERNELS=="input3"
SUBSYSTEMS=="input"
DRIVERS==""
ATTRS{name}=="gpio_keys"
ATTRS{phys}=="gpio-keys/input0"
ATTRS{uniq}==""
ATTRS{properties}=="0"
looking at parent device '/devices/platform/gpio_keys':
KERNELS=="gpio_keys"
SUBSYSTEMS=="platform"
DRIVERS=="gpio-keys"
ATTRS{keys}=="116"
ATTRS{switches}==""
ATTRS{driver_override}=="(null)"
ATTRS{disabled_keys}==""
ATTRS{disabled_switches}==""
looking at parent device '/devices/platform':
KERNELS=="platform"
SUBSYSTEMS==""
DRIVERS==""
|
|
Pretty trivial helper which wraps free() but returns NULL, so we can
simplify this:
free(foobar);
foobar = NULL;
to this:
foobar = mfree(foobar);
|
|
Make sure we release VT-positions when a session is closed. Otherwise,
lingering sessions will occupy VTs and prevent next logins from
succeeding.
Note that we already release session-devices when closing a session, so
there cannot be anyone using the VT anymore.
|
|
Use free_and_strdup() where appropriate and replace equivalent,
open-coded versions.
|
|
Some places invoked fflush() directly with their own manual error
checking, let's unify all that by using fflush_and_check().
This also unifies the general error paths of fflush()+rename() file
writers.
|
|
WRITE_STRING_FILE_ATOMIC is only valid if WRITE_STRING_FILE_CREATE is also
given. IOW, an atomic file write operation is only possible when creating a
file is also being asked for.
This is a regression from the recent write_string_file() rework.
|
|
If a session is in closing state (and already got rid of its VT), then
never re-select it for that VT. There is no reason why we should grant
something to a session that is already going away *AND* already got rid
of exactly that.
|
|
Our seat->positions[] array keeps track of the 'preferred' session on a
VT. The only situation this is used, is to select the session to activate
when a VT is activated. In the normal case, there's only one session per
VT so the selection is trivial.
Older greeters, however, implement take-overs when they start sessions on
the same VT that the greeter ran on. We recently limited such take-overs
to VTs where a greeter is running on, to force people to never share VTs
in new code that is written.
For legacy reasons, we need to be compatible to old greeters, though.
Hence, we allow those greeters to implement take-over. In such take-overs,
however, we should really make sure that the new sessions gets preferred
over the old one under all circumstances. Hence, make sure we override
the previous preferred session with a new session.
|
|
A while back we opened up all of logind's bus calls to unprivileged
users, via PK. However, the dbus1 policy wasn't updated accordingly.
With this change, the dbus1 policy is opened up for all bus calls that
should be available to unprivileged clients.
(also rearranges some calls in the vtable, to make more sense, and be in
line with the order in the bus policy file)
Fixes #471.
|
|
Spell out the proper name. Use 'pos' over 'position', and also update the
logind state file to do the same. Note that this breaks live updates.
However, we only save 'POSITION' on non-seat0, so this shouldn't bother
anyone for real. If you run multi-seat setups, you better restart a
machine on updates, anyway.
|
|
Make sure a greeter can forcefully spawn a session on a VT that is
in-use. A recent patch prevented this (this used to be possible for all
session types) as it is highly fragile. However, as it turns out,
greeters seem to rely on that feature. Therefore, make sure we allow it
explicitly for greeters.
|
|
property callback returns are consistent
|
