summaryrefslogtreecommitdiff
path: root/src/login
AgeCommit message (Collapse)Author
2013-04-19logind-dbus: initialize result variableLukas Nykryn
2013-04-18sd-login.c: fixup for d70964d0Harald Hoyer
p pointer is not _cleanup_free_
2013-04-18move _cleanup_ attribute in front of the typeHarald Hoyer
http://lists.freedesktop.org/archives/systemd-devel/2013-April/010510.html
2013-04-18login/sd-login.c: make use of _cleanup_free_ and friendsHarald Hoyer
2013-04-18Move bus_error to dbus-common and remove bus_error_message_or_strerrorSimon Peeters
bus_error and bus_error_message_or_strerror dit almost exactly the same, so use only one of them and place it in dbus-common.
2013-04-17Report about syntax errors with metadataZbigniew Jędrzejewski-Szmek
The information about the unit for which files are being parsed is passed all the way down. This way messages land in the journal with proper UNIT=... or USER_UNIT=... attribution. 'systemctl status' and 'journalctl -u' not displaying those messages has been a source of confusion for users, since the journal entry for a misspelt setting was often logged quite a bit earlier than the failure to start a unit. Based-on-a-patch-by: Oleksii Shevchuk <alxchk@gmail.com>
2013-04-16nspawn: introduce the new /machine/ tree in the cgroup tree and move ↵Lennart Poettering
containers there Containers will now carry a label (normally derived from the root directory name, but configurable by the user), and the container's root cgroup is /machine/<label>. This label is called "machine name", and can cover both containers and VMs (as soon as libvirt also makes use of /machine/). libsystemd-login can be used to query the machine name from a process. This patch also includes numerous clean-ups for the cgroup code.
2013-04-16logind: filter configured cgroup controller listsLennart Poettering
2013-04-16logind: when looking for cgroup prefixes, allocate from stackLennart Poettering
2013-04-15core: always create /user and /machine top-level cgroup dirsLennart Poettering
This allows clients to put inotify watches on these trees to watch for state changes, without having to wait until these dirs are created. This introduces the new top-level /machine cgroup dir as canonical location where OS containers and VMs shall be located (as discussed with the libvirt folks).
2013-04-15Fix spelling errors using 'codespell' toolAnatol Pomozov
2013-04-15sd-login: add a sd_pid_get_user_unit() callLennart Poettering
2013-04-11errno is positiveZbigniew Jędrzejewski-Szmek
Make sure we compare errno against positive error codes. The ones in hwclock.c and install.c can have an impact, the rest are unlikely to be hit or in code that isn't widely used. Also check that errno > 0, to help gcc know that we are returning a negative error code.
2013-04-10logind: avoid creating stale session state filesFedora systemd team
There were old session state files accumulating in /run/systemd/session. They confused e.g. "reboot", which thought there were still users logged in. The files got created like this: session_stop(Session *s) -> ... unlink(s->state_file); ... seat_set_active(s->seat, NULL) -> session_save(...); /* re-creates the state file we just unlinked */ Fix it simply by clearing the s->started flag earlier to prevent any further writes of the state file (session_save() checks the flag).
2013-04-09logind: introduce an explicit session class for cronjobs and similarLennart Poettering
cronjobs are neither interactive user session, nor lock screens, nor login screens, hence they should get their own class.
2013-04-05Use initalization instead of explicit zeroingZbigniew Jędrzejewski-Szmek
Before, we would initialize many fields twice: first by filling the structure with zeros, and then a second time with the real values. We can let the compiler do the job for us, avoiding one copy. A downside of this patch is that text gets slightly bigger. This is because all zero() calls are effectively inlined: $ size build/.libs/systemd text data bss dec hex filename before 897737 107300 2560 1007597 f5fed build/.libs/systemd after 897873 107300 2560 1007733 f6075 build/.libs/systemd … actually less than 1‰. A few asserts that the parameter is not null had to be removed. I don't think this changes much, because first, it is quite unlikely for the assert to fail, and second, an immediate SEGV is almost as good as an assert.
2013-04-05logind: consider key inhibitors that are taken by non-session processes as ↵Lennart Poettering
global This should allow system services to take over key handling for all sessions, globally.
2013-04-05PAM, uaccess: check for logind, not for systemdMartin Pitt
It is possible to build systemd without logind or run logind without systemd init. Commit 66e41181 fixed sd_booted() to only succeed for systemd init; with that, testing for systemd init is wrong in the parts that talk to logind. In particular, this affects the PAM module and the "uaccess" udev builtin. Change sd_booted() to a new logind_running() which tests for /run/systemd/seats/. For details, see: <https://mail.gnome.org/archives/desktop-devel-list/2013-March/msg00092.html> https://bugs.freedesktop.org/show_bug.cgi?id=62754
2013-04-04login: add sd_login_monitor_get_timeout() public api callLennart Poettering
We don't need this right now, but we should keep our options open, in case we need more than just an fd for waking up.
2013-04-04login: add new public API call sd_login_monitor_get_events() to get poll() ↵Lennart Poettering
flags to wait for We should keep our options open, so that we can watch for POLLOUT later on if we wish to. CUrrently this call will always return POLLIN however.
2013-04-03util: rename parse_usec() to parse_sec() sinds the default unit is secondsLennart Poettering
Internally we store all time values in usec_t, however parse_usec() actually was used mostly to parse values in seconds (unless explicit units were specified to define a different unit). Hence, be clear about this and name the function about what we pass into it, not what we get out of it.
2013-04-03util: rename write_one_line_file() to write_string_file()Lennart Poettering
You can write much more than just one line with this call (and we frequently do), so let's correct the naming.
2013-03-26Drop src/login/uaccess.c, dead codeMartin Pitt
This moved to src/udev/udev-builtin-uaccess.c a while ago.
2013-03-23uaccess: remove needless usb_id call from udev rulesKay Sievers
2013-03-18logind: exploit previous cleanups and simplify returnsZbigniew Jędrzejewski-Szmek
2013-03-18logind: Make more use of cleanup macrosColin Walters
2013-03-18Use bus_maybe_send_reply() where applicableColin Walters
This is a followup to: commit 1a37b9b9043ef83e9900e460a9a1fccced3acf89 It will fix denial messages from dbus-daemon between gdm and systemd-logind on logging into GNOME due to this. See the previous commit for more details.
2013-03-15logind: explicitly create state directories during early initializationLennart Poettering
Strictly speaking this isn't necessary for the /run/systemd/seats/ directory, since that is created anyway as the first seat is found, and seat0 is always found. But let's be explicit here, and also create the sessions/ and users/ directories, so that people can always install inotify watches from very early on, even when nobody logged in yet.
2013-03-11Move udevadm to rootbindirMichael Biebl
The udevadm utility is needed during early boot, so move it to rootbindir to support split-/usr configurations.
2013-03-07pager: introduce "jump to end" optionHarald Hoyer
$ journalctl -be is what you want :) https://bugzilla.redhat.com/show_bug.cgi?id=867841
2013-03-07logind: don't hit an assert if an close() on an input device fd fails with ↵Lennart Poettering
ENODEV because the device is gone https://bugzilla.redhat.com/show_bug.cgi?id=907890
2013-03-05inhibit: print --list if no argument is givenKay Sievers
2013-03-05logind: when registering a new session always use previous session info from ↵Lennart Poettering
cgroup path rather than audit Previously for cases like "su" or "sudo" where a session is attempted to be created from within an existing one we used the audit session ID to detect this and in such a case we simple returned the session data of the original session a second time. With this change we will now use the cgroup path of the calling path to determine the old session, i.e. we only rely on our own session identification scheme, instead of audits. We will continue to keep the audit session ID and ours in sync however, to avoid unnecessary confusion.
2013-03-01inhibit: make the output more readableMantas Mikulėnas
The columnar output can become pretty horrible. When GNOME inhibits power/suspend/hibernate keys, the "WHAT" column's text extends to "WHO" and even "WHY". At the same time, all texts in "WHY" are of the form GNOME handlin...sses Receiving sle...ions GNOME needs t...reen This patch splits each inhibit entry into four lines, allowing the full text to fit in a normal-width terminal.
2013-02-22systemctl: make shutdown operations use irreversible jobsMichal Schmidt
Occasionally people report problem with reboot/poweroff operations hanging in the middle. One known cause is when a new transaction to start a unit is enqueued while the shutdown is going on. The start of the unit conflicts with the shutdown jobs, so they get cancelled. The failure case can be quite unpleasant, becase getty and sshd may already be stopped. Fix it by using irreversible jobs for shutdown (reboot/poweroff/...) actions. This applies to commands like "reboot", "telinit 6", "systemctl reboot". Should someone desire to use reversible jobs, they can say "systemctl start reboot.target".`
2013-02-14update TODOThomas Hindoe Paaboel Andersen
2013-02-14honor SELinux labels, when creating and writing config filesHarald Hoyer
Also split out some fileio functions to fileio.c and provide a SELinux aware pendant in fileio-label.c see https://bugzilla.redhat.com/show_bug.cgi?id=881577
2013-02-13Revert "log_error() if inotify_add_watch() fails"Lennart Poettering
This reverts commit 2826d14091e43ed3397d862dee79d09d0115c84e. We never should generate log messages from a library.
2013-02-13log_error() if inotify_add_watch() failsHarald Hoyer
[zj: Reworded message s/to watch/to add watch on/ to make it clear that it was the watch init action that failed, and not the "process of watching". I think this way it'll be clearer to people who don't know what inotify does.]
2013-02-13use strneq instead of strncmpThomas Hindoe Paaboel Andersen
2013-02-11logind: Allow active sessions to always shutdown by defaultAdel Gadllah
Currently local user are being asked for an admin password when another user is logged into the system. This does not make sense as the user has the power to shut down the system anyway regardless if he/she knows the password or not (by pulling the plug, battery or whatever). So only require the admin authentification for remote sessions. https://bugzilla.gnome.org/show_bug.cgi?id=693385
2013-02-09logind: rename "seat-master" tag to "master-of-seat"Lennart Poettering
We currently enforce that seats are to be named in the form of "seatXXX", i.e. need to begin with the 4 characters "seat". Thus, "seat-master" would qualify as a seat name. As seat names are frequently used as tags on devices, the "seat-master" tag might hence confuse logind if the user decides to name a seat "seat-master". Hence, avoid any ambuigity: let's rename the "seat-master" tag to "master-of-seat".
2013-01-27logind: add MESSAGE_IDs to interesting eventsZbigniew Jędrzejewski-Szmek
2013-01-25logind: rework delay inhibition logicLennart Poettering
- Don't allow any locks to be taken while we are in the process of executing the specific operation, so that apps are not surprised if a suspend/shutdown happens while they rely on their inhibitor. - Get rid of the Resumed signal, it was a bad idea, and redundant due to PrepareForSleep(false), see below. - Always send out PrepareFor{Shutdown,Sleep} signals, instead of only if a delay lock is taken. - Move PrepareForSleep(false) after we come back from the suspend, so that apps can use this as "Resumed" notification. This also has the benefit that apps know when to take a new lock.
2013-01-25loginctl: don't show [UACCESS] info in device treeLennart Poettering
As the tree doesn't really necessarily show all device node devices and only those are marked for uaccess it's kinda pointless showing this at all, since it would give a pretty incomplete impression of the uaccess information.
2013-01-24loginctl: show seat master and uaccess devices in seat-status outputLennart Poettering
2013-01-24logind: add UnlockSessions() clal to complement LockSessions()Lennart Poettering
2013-01-24logind: send Resumed() signal after we come back from ↵Lennart Poettering
suspend/hibernate/hybrid-sleep This allows clients to get asynchronous notifications for user-requested suspend/hibernate cycles. Kernel-triggered automatic suspending is not covered.
2013-01-24logind: only allow one shutdown/sleep action to be queued at the same timeLennart Poettering
This should make sure that closing the lid while shutting down won't suspend the machine but will simply cause the shutdown to complete.
2013-01-16systemctl,loginctl,cgls: do not ellipsize cgroup members when --full is ↵Lukas Nykryn
specified New file output.h with output flags and modes. --full parameter also for cgls and loginctl. Include 'all' parameter in flags (show_cgroup_by_path, show_cgroup, show_cgroup_and_extra, show_cgroup_and_extra_by_spec). get_process_cmdline with max_length == 0 will not ellipsize output. Replace LINE_MAX with 0 in some calls of get_process_cmdline. [zj: Default to --full when under pager for clgs. Drop '-f' since it wasn't documented and didn't actually work. Reindent a bit. ]