| Age | Commit message (Collapse) | Author |
|---|
|
containers there
Containers will now carry a label (normally derived from the root
directory name, but configurable by the user), and the container's root
cgroup is /machine/<label>. This label is called "machine name", and can
cover both containers and VMs (as soon as libvirt also makes use of
/machine/).
libsystemd-login can be used to query the machine name from a process.
This patch also includes numerous clean-ups for the cgroup code.
|
|
|
|
|
|
This allows clients to put inotify watches on these trees to watch for
state changes, without having to wait until these dirs are created.
This introduces the new top-level /machine cgroup dir as canonical
location where OS containers and VMs shall be located (as discussed with
the libvirt folks).
|
|
|
|
|
|
Make sure we compare errno against positive error codes.
The ones in hwclock.c and install.c can have an impact, the
rest are unlikely to be hit or in code that isn't widely
used.
Also check that errno > 0, to help gcc know that we are
returning a negative error code.
|
|
There were old session state files accumulating in /run/systemd/session.
They confused e.g. "reboot", which thought there were still users logged
in. The files got created like this:
session_stop(Session *s) ->
...
unlink(s->state_file);
...
seat_set_active(s->seat, NULL) ->
session_save(...); /* re-creates the state file we just
unlinked */
Fix it simply by clearing the s->started flag earlier to prevent
any further writes of the state file (session_save() checks the flag).
|
|
cronjobs are neither interactive user session, nor lock screens, nor
login screens, hence they should get their own class.
|
|
Before, we would initialize many fields twice: first
by filling the structure with zeros, and then a second
time with the real values. We can let the compiler do
the job for us, avoiding one copy.
A downside of this patch is that text gets slightly
bigger. This is because all zero() calls are effectively
inlined:
$ size build/.libs/systemd
text data bss dec hex filename
before 897737 107300 2560 1007597 f5fed build/.libs/systemd
after 897873 107300 2560 1007733 f6075 build/.libs/systemd
… actually less than 1‰.
A few asserts that the parameter is not null had to be removed. I
don't think this changes much, because first, it is quite unlikely
for the assert to fail, and second, an immediate SEGV is almost as
good as an assert.
|
|
global
This should allow system services to take over key handling for all
sessions, globally.
|
|
It is possible to build systemd without logind or run logind without systemd
init. Commit 66e41181 fixed sd_booted() to only succeed for systemd init; with
that, testing for systemd init is wrong in the parts that talk to logind.
In particular, this affects the PAM module and the "uaccess" udev builtin.
Change sd_booted() to a new logind_running() which tests for
/run/systemd/seats/.
For details, see:
<https://mail.gnome.org/archives/desktop-devel-list/2013-March/msg00092.html>
https://bugs.freedesktop.org/show_bug.cgi?id=62754
|
|
We don't need this right now, but we should keep our options open, in
case we need more than just an fd for waking up.
|
|
flags to wait for
We should keep our options open, so that we can watch for POLLOUT later
on if we wish to. CUrrently this call will always return POLLIN however.
|
|
Internally we store all time values in usec_t, however parse_usec()
actually was used mostly to parse values in seconds (unless explicit
units were specified to define a different unit). Hence, be clear about
this and name the function about what we pass into it, not what we get
out of it.
|
|
You can write much more than just one line with this call (and we
frequently do), so let's correct the naming.
|
|
This moved to src/udev/udev-builtin-uaccess.c a while ago.
|
|
|
|
|
|
|
|
This is a followup to: commit 1a37b9b9043ef83e9900e460a9a1fccced3acf89
It will fix denial messages from dbus-daemon between gdm and
systemd-logind on logging into GNOME due to this.
See the previous commit for more details.
|
|
Strictly speaking this isn't necessary for the /run/systemd/seats/
directory, since that is created anyway as the first seat is found, and
seat0 is always found. But let's be explicit here, and also create the
sessions/ and users/ directories, so that people can always install
inotify watches from very early on, even when nobody logged in yet.
|
|
The udevadm utility is needed during early boot, so move it to
rootbindir to support split-/usr configurations.
|
|
$ journalctl -be
is what you want :)
https://bugzilla.redhat.com/show_bug.cgi?id=867841
|
|
ENODEV because the device is gone
https://bugzilla.redhat.com/show_bug.cgi?id=907890
|
|
|
|
cgroup path rather than audit
Previously for cases like "su" or "sudo" where a session is attempted to
be created from within an existing one we used the audit session ID to
detect this and in such a case we simple returned the session data of
the original session a second time.
With this change we will now use the cgroup path of the calling path to
determine the old session, i.e. we only rely on our own session
identification scheme, instead of audits.
We will continue to keep the audit session ID and ours in sync however,
to avoid unnecessary confusion.
|
|
The columnar output can become pretty horrible. When GNOME inhibits
power/suspend/hibernate keys, the "WHAT" column's text extends to "WHO"
and even "WHY". At the same time, all texts in "WHY" are of the form
GNOME handlin...sses
Receiving sle...ions
GNOME needs t...reen
This patch splits each inhibit entry into four lines, allowing the full
text to fit in a normal-width terminal.
|
|
Occasionally people report problem with reboot/poweroff operations hanging in
the middle. One known cause is when a new transaction to start a unit is
enqueued while the shutdown is going on. The start of the unit conflicts with
the shutdown jobs, so they get cancelled. The failure case can be quite unpleasant,
becase getty and sshd may already be stopped.
Fix it by using irreversible jobs for shutdown (reboot/poweroff/...) actions.
This applies to commands like "reboot", "telinit 6", "systemctl reboot". Should
someone desire to use reversible jobs, they can say "systemctl start reboot.target".`
|
|
|
|
Also split out some fileio functions to fileio.c and provide a SELinux
aware pendant in fileio-label.c
see https://bugzilla.redhat.com/show_bug.cgi?id=881577
|
|
This reverts commit 2826d14091e43ed3397d862dee79d09d0115c84e.
We never should generate log messages from a library.
|
|
[zj: Reworded message s/to watch/to add watch on/ to make it clear
that it was the watch init action that failed, and not the
"process of watching". I think this way it'll be clearer to
people who don't know what inotify does.]
|
|
|
|
Currently local user are being asked for an admin password when another
user is logged into the system. This does not make sense as the user has
the power to shut down the system anyway regardless if he/she knows the
password or not (by pulling the plug, battery or whatever).
So only require the admin authentification for remote sessions.
https://bugzilla.gnome.org/show_bug.cgi?id=693385
|
|
We currently enforce that seats are to be named in the form of
"seatXXX", i.e. need to begin with the 4 characters "seat". Thus,
"seat-master" would qualify as a seat name. As seat names are frequently
used as tags on devices, the "seat-master" tag might hence confuse
logind if the user decides to name a seat "seat-master".
Hence, avoid any ambuigity: let's rename the "seat-master" tag to
"master-of-seat".
|
|
|
|
- Don't allow any locks to be taken while we are in the process of
executing the specific operation, so that apps are not surprised if a
suspend/shutdown happens while they rely on their inhibitor.
- Get rid of the Resumed signal, it was a bad idea, and redundant due to
PrepareForSleep(false), see below.
- Always send out PrepareFor{Shutdown,Sleep} signals, instead of only if
a delay lock is taken.
- Move PrepareForSleep(false) after we come back from the suspend, so
that apps can use this as "Resumed" notification. This also has the
benefit that apps know when to take a new lock.
|
|
As the tree doesn't really necessarily show all device node devices and
only those are marked for uaccess it's kinda pointless showing this at
all, since it would give a pretty incomplete impression of the uaccess
information.
|
|
|
|
|
|
suspend/hibernate/hybrid-sleep
This allows clients to get asynchronous notifications for user-requested
suspend/hibernate cycles. Kernel-triggered automatic suspending is not
covered.
|
|
This should make sure that closing the lid while shutting down won't
suspend the machine but will simply cause the shutdown to complete.
|
|
specified
New file output.h with output flags and modes.
--full parameter also for cgls and loginctl.
Include 'all' parameter in flags (show_cgroup_by_path, show_cgroup,
show_cgroup_and_extra, show_cgroup_and_extra_by_spec).
get_process_cmdline with max_length == 0 will not ellipsize output.
Replace LINE_MAX with 0 in some calls of get_process_cmdline.
[zj: Default to --full when under pager for clgs.
Drop '-f' since it wasn't documented and didn't actually work.
Reindent a bit.
]
|
|
|
|
|
|
sessions before shutting down
https://bugzilla.redhat.com/show_bug.cgi?id=890827
|
|
file logind.c: The seat is now activated by any device with udev tag "seat-master"
file 71-seat.rules.in: All framebuffer devices have this tag
|
|
Yay, we now have a completely generic systemd. No distribution specific checks anymore!
|
|
|
