| Age | Commit message (Collapse) | Author |
|---|
|
Let's use it as initializer where appropriate.
|
|
This ports a lot of manual code over to sigprocmask_many() and friends.
Also, we now consistly check for sigprocmask() failures with
assert_se(), since the call cannot realistically fail unless there's a
programming error.
Also encloses a few sd_event_add_signal() calls with (void) when we
ignore the return values for it knowingly.
|
|
login: fix potential null pointer dereference
|
|
Fix CID 1304686: Dereference after null check (FORWARD_NULL)
However, this commit does not fix any bug in logind. It helps to keep
the elect_display_compare() function generic.
|
|
If you use bus_map_all_properties(), you must be aware that it might
touch output variables even though it may fail. This is, because we parse
many different bus-properties and cannot tell how to clean them up, in
case we fail deep down in the parser.
Fix all callers of bus_map_all_properties() to correctly cleanup any
context structures at all times.
|
|
basic/ can be used by everything
cannot use anything outside of basic/
libsystemd/ can use basic/
cannot use shared/
shared/ can use libsystemd/
|
|
|
|
mask/handlers
Also, when the child is potentially long-running make sure to set a
death signal.
Also, ignore the result of the reset operations explicitly by casting
them to (void).
|
|
The previous implementation of user_elect_display() could easily end up
overwriting the user’s valid graphical session with a new TTY session.
For example, consider the situation where there is one session:
c1, type = SESSION_X11, !stopping, class = SESSION_USER
it is initially elected as the user’s display (i.e. u->display = c1).
If another session is started, on a different VT, the sessions_by_user
list becomes:
c1, type = SESSION_X11, !stopping, class = SESSION_USER
c2, type = SESSION_TTY, !stopping, class = SESSION_USER
In the previous code, graphical = c1 and text = c2, as expected.
However, neither graphical nor text fulfil the conditions for setting
u->display = graphical (because neither is better than u->display), so
the code falls through to check the text variable. The conditions for
this match, as u->display->type != SESSION_TTY (it’s actually
SESSION_X11). Hence u->display is set to c2, which is incorrect, because
session c1 is still valid.
Refactor user_elect_display() to use a more explicit filter and
pre-order comparison over the sessions. This can be demonstrated to be
stable and only ever ‘upgrade’ the session to a more graphical one.
https://bugs.freedesktop.org/show_bug.cgi?id=90769
|
|
logind: Save the user’s state when a session enters SESSION_ACTIVE
|
|
logind: Add a udev rule to tag all DRM cards with master-of-seat
|
|
This is needed for generic DRM devices like the VirtualBox vboxvideo
driver, which exposes itself as a generic, ID-less DRM device at
/dev/dri/card0 (after applying this commit):
$ udevadm info --query=all --path \
/sys/devices/pci0000:00/0000:00:02.0/drm/card0
P: /devices/pci0000:00/0000:00:02.0/drm/card0
N: dri/card0
E: DEVNAME=/dev/dri/card0
E: DEVPATH=/devices/pci0000:00/0000:00:02.0/drm/card0
E: DEVTYPE=drm_minor
E: ID_FOR_SEAT=drm-pci-0000_00_02_0
E: ID_PATH=pci-0000:00:02.0
E: ID_PATH_TAG=pci-0000_00_02_0
E: MAJOR=226
E: MINOR=0
E: SUBSYSTEM=drm
E: TAGS=:master-of-seat:seat:uaccess:
E: USEC_INITIALIZED=59893
Without this patch, the capabilities for a seat on a VirtualBox
installation of systemd v219 incorrectly show it as non-graphical, even
though I can type these commands from an xterm:
$ loginctl show-seat seat0
Id=seat0
CanMultiSession=yes
CanTTY=yes
CanGraphical=no
…
https://bugs.freedesktop.org/show_bug.cgi?id=90822
|
|
When (for example) switching from X11 to a new VT and logging in there,
creating a new session, the user state file (/run/systemd/users/$uid) is
not updated after the session becomes active. The latest time it is
saved is when the session is in SESSION_OPENING.
This results in a /run/systemd/users/$uid file which contains
STATE=online for the current user on the current active VT, which is
obviously wrong.
As functions like sd_uid_get_state() use this file to get the user’s
state, this could result in things like PolicyKit making incorrect
decisions about the user’s state. (See
https://bugs.freedesktop.org/show_bug.cgi?id=76358.)
Fix this by re-saving the state for a session’s user after completing
the state_job for that session.
https://bugs.freedesktop.org/show_bug.cgi?id=90818
|
|
No functional changes.
|
|
This makes path_is_mount_point() consistent with fd_is_mount_point() wrt.
flags.
|
|
Make Coverity happy and tell it we're not interested in the return
value of these two calls.
|
|
When a scheduled is cancelled, make sure to remove /run/nologin.
This is a regression from the recent shutdownd removal and logind rework.
|
|
|
|
A variety of changes:
- Make sure all our calls distuingish OOM from other errors if OOM is
not the only error possible.
- Be much stricter when parsing escaped paths, do not accept trailing or
leading escaped slashes.
- Change unit validation to take a bit mask for allowing plain names,
instance names or template names or an combination thereof.
- Refuse manipulating invalid unit name
|
|
If NULL is specified for the bus it is now automatically derived from
the passed in message.
This commit also changes a number of invocations of sd_bus_send() to
make use of this.
|
|
This should simplify the prototype a bit. The bus parameter is redundant
in most cases, and in the few where it matters it can be derived from
the message via sd_bus_message_get_bus().
|
|
log_error_errno() already adds a newline, so drop them.
|
|
Port over more code from shutdownd and teach logind to write /run/nologin at
least 5 minutes before the system is going down, and
/run/systemd/shutdown/scheduled when a shutdown is scheduled.
|
|
Add a timer to print UTMP wall messages so that it repeatedly informs users
about a scheduled shutdown:
* every 1 minute with less than 10 minutes to go
* every 15 minutes with less than 60 minutes to go
* every 30 minutes with less than 180 minutes (3 hours) to go
* every 60 minutes if more than that to go
This functionality only active if the .EnableWallMessages DBus property
is set to true. Also, a custom string can be added to the wall message,
set through the WallMessagePrefix property.
|
|
Add a method called ScheduleShutdown in org.freedesktop.login1.Manager
which adds a timer to shut down the system at a later point in time.
The first argument holds the type of the schedule that is about to
happen, and must be one of 'reboot', 'halt' or 'poweroff'.
The second argument specifies the absolute time, based on
CLOCK_REALTIME in nanoseconds, at which the the operation should be
executed.
To cancel a previously scheduled shutdown, the CancelScheduledShutdown()
can be called, which returns a bool, indicating whether a scheduled
timeout was cancelled.
Also add a new property called ScheduledShutdown which returns the
equivalent to what was passed in via ScheduleShutdown, as '(st)' type.
|
|
Factor out the code to ask polkit for authorization from
method_do_shutdown_or_sleep() into an own function called
verify_shutdown_creds().
This is needed in order to also use the same checks when shutdown
operations are scheduled. For that, it's also necessary to allow
NULL values for that action{,_multiple_sessions,_ignore_inhibit)
arguments, which will suppress the call if no action string is
passed.
|
|
make manager_gc(), manager_startup(), manager_new(), manager_free()
and manager_run() static, and kill their forward declarations.
|
|
Instead of open-coding the delayed action and inhibit timeout logic,
switch over to a real sd_event_source based implementation.
This is not only easier to read but also allows us to add more timers
in the future.
|
|
|
|
CID #996284.
|
|
|
|
|
|
|
|
Newer dbus versions have an "allow interactive authentication" bit in
the message header, hence it is not necessary to take a boolean for this
explicitly.
|
|
|
|
non-interactive
Interactive authorization should only happen asynchronously, hence
disallow it in synchronous bus_verify_polkit(), and rename it to
bus_test_polkit(). This way even if the bus message header asks for
interactive authorization, we'll ask for non-interactive authorization
which is actually the desired behaviour if CanSuspend, CanHibernate and
friends, which call this function.
|
|
Change cunescape() to return a normal error code, so that we can
distuingish OOM errors from parse errors.
This also adds a flags parameter to control whether "relaxed" or normal
parsing shall be done. If set no parse failures are generated, and the
only reason why cunescape() can fail is OOM.
|
|
- Move to its own file rm-rf.c
- Change parameters into a single flags parameter
- Remove "honour sticky" logic, it's unused these days
|
|
It allocates memory, so it can fail.
CID #1237527.
|
|
CID #1237545.
|
|
Replace ENOTSUP by EOPNOTSUPP as this is what linux actually uses.
|
|
CID #1256583.
|
|
This introduces 'HoldoffTimeoutSec' to logind.conf to make
IGNORE_LID_SWITCH_{SUSPEND,STARTUP}_USEC configurable.
Background: If an external monitor is connected, or if the system is
docked, we want to ignore LID events. This is required to support setups
where a laptop is used with external peripherals while the LID is closed.
However, this requires us to probe all hot-plugged devices before reacting
to LID events. But with modern buses like USB, the standards do not impose
any timeout on the slots, so we have no chance to know whether a given
slot is used or not. Hence, after resume and startup, we have to wait a
fixed timeout to give the kernel a chance to probe devices. Our timeout
has always been generous enough to support even the slowest devices.
However, a lot of people didn't use these features and wanted to disable
the hold-off timer. Now we provide a knob to do that.
|
|
For daemons which have a main configuration file, there's
little reason for the administrator to use configuration snippets.
They are useful for packagers which need to override settings, but
we shouldn't advertise that as the main way of configuring those
services.
https://bugs.freedesktop.org/show_bug.cgi?id=89397
|
|
Suggested by Zbyszek on IRC.
[zj: /run/nologin is used with PAM. systemd-user-session is independent
of logind.]
|
|
|
|
This patch removes includes that are not used. The removals were found with
include-what-you-use which checks if any of the symbols from a header is
in use.
|
|
|
|
Also, allow clients to alter their own objects without any further
priviliges. i.e. this allows clients to kill and lock their own sessions
without involving PK.
|
|
|
