Age | Commit message (Collapse) | Author |
|
|
|
|
|
|
|
There are more than enough to deserve their own .c file, hence move them
over.
|
|
get_current_dir_name() can return a variety of errors, not just ENOMEM,
hence don't blindly turn its errors to ENOMEM, but return correct errors
in path_make_absolute_cwd().
This trickles down into a couple of other functions, some of which
receive unrelated minor fixes too with this commit.
|
|
using "machinectl set-limit"
Previously, we already accepted "-" as special value for dropping
limits. Add "infinity", as that's what we support for RLIMITs and hence
should support here to. Also add "none" as that's what the btrfs tools
use.
|
|
With this change we'll open the shell's tty right from machined and then
pass it to the transient unit we create. This way we make sure the pty
is opened exactly as long as the transient service is around, and no
longer, and vice versa. This way pty forwarders do not have to deal with
EIO problems due to vhangup, as the pty is open all the time from the
point we set things up to the point where the service goes away.
|
|
Previously, we'd allocate the TTY, spawn a service on it, but
immediately start processing the TTY and forwarding it to whatever the
commnd was started on. This is however problematic, as the TTY might get
actually opened only much later by the service. We'll hence first get
EIOs on the master as the other side is still closed, and hence
considered it hung up and terminated the session.
With this change we add a flag to the pty forwarding logic:
PTY_FORWARD_IGNORE_INITIAL_VHANGUP. If set, we'll ignore all hangups
(i.e. EIOs) on the master PTY until the first byte is successfully read.
From that point on we consider a hangup/EIO a regular connection termination. This
way, we handle the race: when we get EIO initially we'll ignore it,
until the connection is properly set up, at which time we start
honouring it.
|
|
In sd-bus, the sd_bus_open_xyz() family of calls allocates a new bus,
while sd_bus_default_xyz() family tries to reuse the thread's default
bus. bus_open_transport() sometimes internally uses the former,
sometimes the latter family, but suggests it only calls the former via
its name. Hence, let's avoid this confusion, and generically rename the
call to bus_connect_transport().
Similar for all related calls.
And while we are at it, also change cgls + cgtop to do direct systemd
connections where possible, since all they do is talk to systemd itself.
|
|
This also allows us to drop build.h from a ton of files, hence do so.
Since we touched the #includes of those files, let's order them properly
according to CODING_STYLE.
|
|
Let's underline the header line of the table shown by cgtop, how it is
customary for tables. In order to do this, let's introduce new ANSI
underline macros, and clean up the existing ones as side effect.
|
|
off_t is a really weird type as it is usually 64bit these days (at least
in sane programs), but could theoretically be 32bit. We don't support
off_t as 32bit builds though, but still constantly deal with safely
converting from off_t to other types and back for no point.
Hence, never use the type anymore. Always use uint64_t instead. This has
various benefits, including that we can expose these values directly as
D-Bus properties, and also that the values parse the same in all cases.
|
|
Patch via coccinelle.
|
|
In all cases where the function (or cg_is_empty_recursive()) ignoring
the calling process is actually wrong, as a process keeps a cgroup busy
regardless if its the current one or another. Hence, let's simplify
things and drop the "ignore_self" parameter.
|
|
Let's add a way to get the type-specific D-Bus interface of a unit from
either its type or name to src/basic/unit-name.[ch]. That way we can
share it with the client side, where it is useful in tools like cgls or
machinectl.
Also ports over machinectl to make use of this.
|
|
|
|
|
|
In order to make "machinectl shell" more similar to ssh, allow the
following syntax to connect to a container under a specific username:
machinectl shell lennart@fedora
Also beefs up related man page documentation.
|
|
If no machine name is specified, imply that we connect to ".host", i.e.
the local host.
|
|
Let's hide all machines whose name begins with "." by default, thus
hiding the ".host" pseudo-machine, unless --all is specified. This
takes inspiration from the ".host" image handling in "machinectl
list-images" which also hides all images whose name starts with ".".
|
|
Some of the operations machined/machinectl implement are also very
useful when applied to the host system (such as machinectl login,
machinectl shell or machinectl status), hence introduce a pseudo-machine
by the name of ".host" in machined that refers to the host system, and
may be used top execute operations on the host system with.
This copies the pseudo-image ".host" machined already implements for
image related commands.
(This commit also adds a PK privilege for opening a PTY in a container,
which was previously not accessible for non-root.)
|
|
As it turns out machine_name_is_valid() does the exact same thing as
hostname_is_valid() these days, as it just invoked that and checked the
name length was < 64. However, hostname_is_valid() checks the length
against HOST_NAME_MAX anyway (which is 64 on Linux), hence any
additional check is redundant.
We hence replace machine_name_is_valid() by a macro that simply maps it
to hostname_is_valid() but sets the allow_trailing_dot parameter to
false. We also move this this call to hostname-util.h, to the same place
as the hostname_is_valid() declaration.
|
|
This makes use of machined's new OpenShell() command and allows opening
a new interactive shell in any container.
|
|
|
|
sd_bus_flush_close_unref() is a call that simply combines sd_bus_flush()
(which writes all unwritten messages out) + sd_bus_close() (which
terminates the connection, releasing all unread messages) +
sd_bus_unref() (which frees the connection).
The combination of this call is used pretty frequently in systemd tools
right before exiting, and should also be relevant for most external
clients, and is hence useful to cover in a call of its own.
Previously the combination of the three calls was already done in the
_cleanup_bus_close_unref_ macro, but this was only available internally.
Also see #327
|
|
This ports a lot of manual code over to sigprocmask_many() and friends.
Also, we now consistly check for sigprocmask() failures with
assert_se(), since the call cannot realistically fail unless there's a
programming error.
Also encloses a few sd_event_add_signal() calls with (void) when we
ignore the return values for it knowingly.
|
|
If you use bus_map_all_properties(), you must be aware that it might
touch output variables even though it may fail. This is, because we parse
many different bus-properties and cannot tell how to clean them up, in
case we fail deep down in the parser.
Fix all callers of bus_map_all_properties() to correctly cleanup any
context structures at all times.
|
|
No functional changes.
|
|
https://bugs.freedesktop.org/show_bug.cgi?id=42940
|
|
|
|
A variety of changes:
- Make sure all our calls distuingish OOM from other errors if OOM is
not the only error possible.
- Be much stricter when parsing escaped paths, do not accept trailing or
leading escaped slashes.
- Change unit validation to take a bit mask for allowing plain names,
instance names or template names or an combination thereof.
- Refuse manipulating invalid unit name
|
|
This should simplify the prototype a bit. The bus parameter is redundant
in most cases, and in the few where it matters it can be derived from
the message via sd_bus_message_get_bus().
|
|
|
|
|
|
Replace ENOTSUP by EOPNOTSUPP as this is what linux actually uses.
|
|
|
|
|
|
Also, expose it in machinectl.
|
|
|
|
This also adds "machinectl import-raw" and "machinectl import-tar" to
wrap these new bus calls.
THe commands basically do for local files that "machinectl pull-raw" and
friends do for remote files.
|
|
pool size
|
|
|
|
arguments show statistics about pool
|
|
This patch removes includes that are not used. The removals were found with
include-what-you-use which checks if any of the symbols from a header is
in use.
|
|
Previously we always invoked the container PID 1 on /dev/console of the
container. With this change we do so only if nspawn was invoked
interactively (i.e. its stdin/stdout was connected to a TTY). In all other
cases we directly pass through the fds unmodified.
This has the benefit that nspawn can be added into shell pipelines.
https://bugs.freedesktop.org/show_bug.cgi?id=87732
|
|
|
|
operations
This way, any bus client can make use of these calls.
|
|
machined
This extends the bus interface, adding BindMountMachine() for bind
mounting directories from the host into the container.
|
|
Also, document in adjacent comments and in CODING_STYLE why we do that.
|
|
After all it is now much more like strjoin() than strappend(). At the
same time, add support for NULL sentinels, even if they are normally not
necessary.
|