| Age | Commit message (Collapse) | Author |
|---|
|
Otherwise starting a machine named `foo-bar-baz` will end up in
machinectl attempting to start the service unit
`systemd-nspawn@foo\x2dbar\x2dbaz` instead of
`systemd-nspawn@foo-bar-baz`.
|
|
the pager (#3550)
If "systemctl -H" is used, let's make sure we first terminate the bus
connection, and only then close the pager. If done in this order ssh will get
an EOF on stdin (as we speak D-Bus through ssh's stdin/stdout), and then
terminate. This makes sure the standard error we were invoked on is released by
ssh, and only that makes sure we don't deadlock on the pager which waits for
all clients closing its input pipe.
(Similar fixes for the various other xyzctl tools that support both pagers and
-H)
Fixes: #3543
|
|
|
|
and make use of it everywhere
|
|
We have to pass addresses of changes and n_changes to
bus_deserialize_and_dump_unit_file_changes(). Otherwise we are hit by
missing information (subsequent calls to unit_file_changes_add() to
not add anything).
Also prevent null pointer dereference in
bus_deserialize_and_dump_unit_file_changes() by asserting.
Fixes #3339
|
|
call timeout
By default we timeout all bus calls, but if we know that these bus calls might
be slow, let's explicitly turn the timeouts off.
|
|
With this all potentially slow operations are done out-of-process,
asynchronously, using the same "Operation" object.
|
|
If we remove a directory image (i.e. not a btrfs snapshot) then things might
get quite expensive, hence run this asynchronous in a forked off process, too.
|
|
Let's make sigkill_wait() take a normal pid_t, and add sigkill_waitp() that
takes a pointer (which is useful for usage in _cleanup_), following the usual
logic we have for this.
|
|
Cloning an image can be slow, if the image is not on a btrfs subvolume, hence
let's make sure we do this asynchronously in a child process, so that machined
isn't blocked as long as we process the client request.
This adds a new, generic "Operation" object to machined, that is used to track
these kind of background processes.
This is inspired by the MachineOperation object that already exists to make
copy operations asynchronous. A later patch will rework the MachineOperation
logic to use the generic Operation instead.
|
|
It's better to avoid having the option string duplicated, lest we forget
to modify them in sync in the future.
|
|
rework "journalctl -M"
|
|
non-btrfs file systems (#3117)
Fixes: #2060
(Of course, in the long run, we should probably add a copy-based fall-back. But
given how slow that is, this probably requires some asynchronous forking logic
like the CopyFrom() and CopyTo() method calls already implement.)
|
|
This new call returns a file descriptor for the root directory of a container.
This file descriptor may then be used to access the rest of the container's
file system, via openat() and similar calls. Since the file descriptor returned
is for the file system namespace inside of the container it may be used to
access all files of the container exactly the way the container itself would
see them. This is particularly useful for containers run directly from
loopback media, for example via systemd-nspawn's --image= switch. It also
provides access to directories such as /run of a container that are normally
not accessible to the outside of a container.
This replaces PR #2870.
Fixes: #2870
|
|
Fixes: #2420
|
|
systemd-run: fix --slice= in conjunction with --scope
|
|
|
|
Make this an output flag instead, so that our function prototypes can lose one
parameter
|
|
This ports over machinectl and loginctl to also use the new GetProcesses() bus
call to show the process tree of a container or login session. This is similar
to how systemctl already has been ported over in a previous commit.
|
|
|
|
The coccinelle patch didn't work in some places, I have no idea why.
|
|
This new command removes all, or all hidden container images that have been
downloaded.
|
|
numbers
And port all code over to use it.
|
|
|
|
|
|
tree-wide: merge pager_open_if_enabled() to the pager_open()
|
|
Many subsystems define own pager_open_if_enabled() function which
checks '--no-pager' command line argument and open pager depends
on its value. All implementations of pager_open_if_enabled() are
the same. Let's merger this function with pager_open() from the
shared/pager.c and remove pager_open_if_enabled() from all subsytems
to prevent code duplication.
|
|
|
|
Networkctl prettification
|
|
|
|
Throughout the tree there's spurious use of spaces separating ++ and --
operators from their respective operands. Make ++ and -- operator
consistent with the majority of existing uses; discard the spaces.
|
|
|
|
The deserialize_timestamp_value() is renamed timestamp_deserialize() to be more
consistent with dual_timestamp_deserialize()
And add the NULL check back on realtime and monotonic
|
|
which is introduced in the ebf30a086dfa commit.
|
|
This should be handled fine now by .dir-locals.el, so need to carry that
stuff in every file.
|
|
|
|
loopback file
An unlimited quota makes a lot of sense, but we really should try to propagate this onto the loopback file size, since
an infinitely sized file makes no sense.
Fixes: #2314 #2253
|
|
Issue #2388 suggests the current TasksMax= setting for user processes is to low. Bump it to 12K. Also, bump the
container TasksMax= from 8K to 16K, so that it remains higher than the one for user processes.
(Compare: the kernel default limit for processes system-wide is 32K).
Fixes #2388
|
|
... to determine if color output should be enabled. If the variable is not set,
fall back to using on_tty(). Also, rewrite existing code to use
colors_enabled() where appropriate.
|
|
Remove gcc warnings v2
|
|
When a unit was started with "systemctl --user" and it failed, error
messages is printed as "systemctl status". But it should be "systemctl
--user status".
|
|
Compare errno with zero in a way that tells gcc that
(if the condition is true) errno is positive.
|
|
|
|
The current code is not compatible with current dkr protocols anyway,
and dkr has a different focus ("microservices") than nspawn anyway
("whole machine containers"), hence drop support for it, we cannot
reasonably keep this up to date, and it creates the impression we'd
actually care for the microservices usecase.
|
|
https://github.com/systemd/systemd/issues/2016
|
|
GLIB has recently started to officially support the gcc cleanup
attribute in its public API, hence let's do the same for our APIs.
With this patch we'll define an xyz_unrefp() call for each public
xyz_unref() call, to make it easy to use inside a
__attribute__((cleanup())) expression. Then, all code is ported over to
make use of this.
The new calls are also documented in the man pages, with examples how to
use them (well, I only added docs where the _unref() call itself already
had docs, and the examples, only cover sd_bus_unrefp() and
sd_event_unrefp()).
This also renames sd_lldp_free() to sd_lldp_unref(), since that's how we
tend to call our destructors these days.
Note that this defines no public macro that wraps gcc's attribute and
makes it easier to use. While I think it's our duty in the library to
make our stuff easy to use, I figure it's not our duty to make gcc's own
features easy to use on its own. Most likely, client code which wants to
make use of this should define its own:
#define _cleanup_(function) __attribute__((cleanup(function)))
Or similar, to make the gcc feature easier to use.
Making this logic public has the benefit that we can remove three header
files whose only purpose was to define these functions internally.
See #2008.
|
|
This is a continuation of the previous include sort patch, which
only sorted for .c files.
|
|
|
|
Sort the includes accoding to the new coding style.
|
|
Always validate first before we start processing the data.
|
