| Age | Commit message (Collapse) | Author |
|---|
|
…and use it where possible.
|
|
|
|
for machine list (#4972)
Fixes: #4918
|
|
|
|
Print addresses returns EOPNOTSUPP, not ENOSYS, when trying to print
addresses for non-container machines.
|
|
|
|
In preparation for reusing the image dissector in the GPT auto-discovery
logic, only optionally fail the dissection when we can't identify a root
partition.
In the GPT auto-discovery we are completely fine with any kind of root,
given that we run when it is already mounted and all we do is find some
additional auxiliary partitions on the same disk.
|
|
This is useful for reusing the dissector logic in the gpt-auto-discovery logic:
there we really don't want to use MBR or naked file systems as root device.
|
|
Fixes: #4823
|
|
This adds support for discovering and making use of properly tagged dm-verity
data integrity partitions. This extends both systemd-nspawn and systemd-dissect
with a new --root-hash= switch that takes the root hash to use for the root
partition, and is otherwise fully automatic.
Verity partitions are discovered automatically by GPT table type UUIDs, as
listed in
https://www.freedesktop.org/wiki/Specifications/DiscoverablePartitionsSpec/
(which I updated prior to this change, to include new UUIDs for this purpose.
mkosi with https://github.com/systemd/mkosi/pull/39 applied may generate images
that carry the necessary integrity data. With that PR and this commit, the
following simply lines suffice to boot up an integrity-protected container image:
```
# mkdir test
# cd test
# mkosi --verity
# systemd-nspawn -i ./image.raw -bn
```
Note that mkosi writes the image file to "image.raw" next to a a file
"image.roothash" that contains the root hash. systemd-nspawn will look for that
file and use it if it exists, in case --root-hash= is not specified explicitly.
|
|
This adds support to the image dissector to deal with encrypted images (only
LUKS). Given that we now have a neatly isolated image dissector codebase, let's
add a new feature to it: support for automatically dealing with encrypted
images. This is then exposed in systemd-dissect and nspawn.
It's pretty basic: only support for passphrase-based encryption.
In order to ensure that "systemd-dissect --mount" results in mount points whose
backing LUKS DM devices are cleaned up automatically we use the DM_DEV_REMOVE
ioctl() directly on the device (in DM_DEFERRED_REMOVE mode). libgcryptsetup at
the moment doesn't provide a proper API for this. Thankfully, the ioctl() API
is pretty easy to use.
|
|
This adds a bus call GetImageOSRelease() to the Manager interface that
retrieves the /etc/os-release file of a machine image. It matches the existing
GetMachineOSRelease() call, however operates on a disk image rather than a
running container.
The backend for this call on .raw images is implemented via the generalized
image dissector, which makes this scheme relatively easy to implement.
|
|
We don't have plural in the name of any other -util files and this
inconsistency trips me up every time I try to type this file name
from memory. "formats-util" is even hard to pronounce.
|
|
|
|
This makes strjoin and strjoina more similar and avoids the useless final
argument.
spatch -I . -I ./src -I ./src/basic -I ./src/basic -I ./src/shared -I ./src/shared -I ./src/network -I ./src/locale -I ./src/login -I ./src/journal -I ./src/journal -I ./src/timedate -I ./src/timesync -I ./src/nspawn -I ./src/resolve -I ./src/resolve -I ./src/systemd -I ./src/core -I ./src/core -I ./src/libudev -I ./src/udev -I ./src/udev/net -I ./src/udev -I ./src/libsystemd/sd-bus -I ./src/libsystemd/sd-event -I ./src/libsystemd/sd-login -I ./src/libsystemd/sd-netlink -I ./src/libsystemd/sd-network -I ./src/libsystemd/sd-hwdb -I ./src/libsystemd/sd-device -I ./src/libsystemd/sd-id128 -I ./src/libsystemd-network --sp-file coccinelle/strjoin.cocci --in-place $(git ls-files src/*.c)
git grep -e '\bstrjoin\b.*NULL' -l|xargs sed -i -r 's/strjoin\((.*), NULL\)/strjoin(\1)/'
This might have missed a few cases (spatch has a really hard time dealing
with _cleanup_ macros), but that's no big issue, they can always be fixed
later.
|
|
|
|
Add an "invocation ID" concept to the service manager
|
|
as its output is fairly long.
|
|
This way, we can make use of this in other code, too.
|
|
It seems to me that the explicit positional argument should have higher
priority than "an option".
|
|
|
|
sd_bus_error_set_errnof supports %m, so there's no need to call
strerror manually.
|
|
This splits the OS field in two : one for the distribution name
and one for the the version id.
Dashes are written for missing fields.
This also prints ip addresses of known machines. The `--max-addresses`
option specifies how much ip addresses we want to see. The default is 1.
When more than one address is written for a machine, a `,` follows it.
If there are more ips than `--max-addresses`, `...` follows the last
address.
|
|
|
|
Beef up the existing var_tmp() call, rename it to var_tmp_dir() and add a
matching tmp_dir() call (the former looks for the place for /var/tmp, the
latter for /tmp).
Both calls check $TMPDIR, $TEMP, $TMP, following the algorithm Python3 uses.
All dirs are validated before use. secure_getenv() is used in order to limite
exposure in suid binaries.
This also ports a couple of users over to these new APIs.
The var_tmp() return parameter is changed from an allocated buffer the caller
will own to a const string either pointing into environ[], or into a static
const buffer. Given that environ[] is mostly considered constant (and this is
exposed in the very well-known getenv() call), this should be OK behaviour and
allows us to avoid memory allocations in most cases.
Note that $TMPDIR and friends override both /var/tmp and /tmp usage if set.
|
|
For this moment machinectl prints legend and count of machines/images/etc.
But in a case when we have no images,machines,etc., there is no sense to
show legend:
~$ machinectl
MACHINE CLASS SERVICE
0 machines listed.
Let's print only 'No machines', 'No images', 'No transfers' in this case.
|
|
It's a bit easier to read because shorter. Also, most likely a tiny bit faster.
|
|
|
|
|
|
|
|
make "machinectl clean" asynchronous, and open it up via PolicyKit
|
|
machinectl: interpret options placed between "shell" verb and machine name
|
|
Let's make sure we catch early when a machine doesn't exist that is attempted
to be started or enabled as system service.
|
|
The method is already hooked up to PolicyKit, hence let's open this up via the
bus policy language too.
Fixes: #3585
|
|
background process
This is a follow-up to 5d2036b5f3506bd0ff07042aee8d69c26db32298, and also makes
the "machinectl clean" verb asynchronous, after all it's little more than a
series of image removals.
The changes required to make this happen are a bit more comprehensive as we
need to pass information about deleted images back to the client, as well as
information about the image we failed on if we failed on one. Hence, create a
temporary file in /tmp, serialize that data into, and read it from the parent
after the operation is complete.
|
|
There's no point in explicitly closing the errno pipe, if we exit right after
anyway. It doesn't hurt doing this either, but let's do this the same way for
all cases where we use the "Operation" object right now, and in all other cases
we do not close the pipe explicitly, hence don't do so here either.
|
|
Otherwise starting a machine named `foo-bar-baz` will end up in
machinectl attempting to start the service unit
`systemd-nspawn@foo\x2dbar\x2dbaz` instead of
`systemd-nspawn@foo-bar-baz`.
|
|
Previously, we'd stop processing of the argument list immediately when hitting
the "shell" verb. However, we really should continue processing options then,
until we hit the machine name.
Fixes: #3472
|
|
the pager (#3550)
If "systemctl -H" is used, let's make sure we first terminate the bus
connection, and only then close the pager. If done in this order ssh will get
an EOF on stdin (as we speak D-Bus through ssh's stdin/stdout), and then
terminate. This makes sure the standard error we were invoked on is released by
ssh, and only that makes sure we don't deadlock on the pager which waits for
all clients closing its input pipe.
(Similar fixes for the various other xyzctl tools that support both pagers and
-H)
Fixes: #3543
|
|
|
|
and make use of it everywhere
|
|
We have to pass addresses of changes and n_changes to
bus_deserialize_and_dump_unit_file_changes(). Otherwise we are hit by
missing information (subsequent calls to unit_file_changes_add() to
not add anything).
Also prevent null pointer dereference in
bus_deserialize_and_dump_unit_file_changes() by asserting.
Fixes #3339
|
|
call timeout
By default we timeout all bus calls, but if we know that these bus calls might
be slow, let's explicitly turn the timeouts off.
|
|
With this all potentially slow operations are done out-of-process,
asynchronously, using the same "Operation" object.
|
|
If we remove a directory image (i.e. not a btrfs snapshot) then things might
get quite expensive, hence run this asynchronous in a forked off process, too.
|
|
Let's make sigkill_wait() take a normal pid_t, and add sigkill_waitp() that
takes a pointer (which is useful for usage in _cleanup_), following the usual
logic we have for this.
|
|
Cloning an image can be slow, if the image is not on a btrfs subvolume, hence
let's make sure we do this asynchronously in a child process, so that machined
isn't blocked as long as we process the client request.
This adds a new, generic "Operation" object to machined, that is used to track
these kind of background processes.
This is inspired by the MachineOperation object that already exists to make
copy operations asynchronous. A later patch will rework the MachineOperation
logic to use the generic Operation instead.
|
|
It's better to avoid having the option string duplicated, lest we forget
to modify them in sync in the future.
|
|
rework "journalctl -M"
|
|
non-btrfs file systems (#3117)
Fixes: #2060
(Of course, in the long run, we should probably add a copy-based fall-back. But
given how slow that is, this probably requires some asynchronous forking logic
like the CopyFrom() and CopyTo() method calls already implement.)
|
